Prisma PVC Warm Peel Heat Transfer Vinyl - 20" Width Half Yard

Comes in half yard sheets (rolls)

• actual product width can vary +/- 0.25³
• Does not come with inner core tube.

PVC heat transfer film is a little thicker and high temperature resistant adhesive base PVC film that can hold cut-out image in place for excellent transfer.

It features excellent cut and weed-ability, good flexibility and durability, showing no transformation by expansion and shrinking.

It is very suitable solution for numbering, lettering and small logo or symbols, detailed designs for sports uniforms, t-shirts and other garments

• Cotton, Polyester, Cotton/Poly Blends [T-shirt, Sport jersey, Uniforms, Sweater, Jacket, Caps, etc.] PVC
• Temperature : 150 C~ 160 C
• Time : 8 ~ 10 seconds
• Warm Peel
• 510MM(W)
• Normal Color 110 (166) micron
• Neon Color 150 (200) micron

Make long-lasting decals for t-shirts, hats, hoodies, bags, and more with All American's Prisma Standard Heat Applied Vinyl. Cut designs out then a vinyl cutter and then heat press them onto fabric to create popular and inexpensive apparel. Prisma Standard vinyl is available in a wide variety of colors including neon and metallic. Vinyl available by the yard and half yard.

Directions

• Cut vinyl with a GX-24 cutter using a 45 ° or 60 ° degree blade at approximately 120 pressure.
• Apply to fabric with a heat press set at 320 °F (177 °C) for 8 - 10 seconds using medium to heavy pressure.
• Warm peel the carrier sheet after pressing is complete.

Care Instructions:

• Turn the garment inside-out and wash on Gentle Cycle in lukewarm water using a mild detergent.
• Hang or Tumble dry at temperatures lower than 175 °f (79 °C)
• Do Not Iron directly over the vinyl transfer.
• Do Not Dry Clean.