Description
Bundle the Prestige R2 DTF Printer with a Phoenix Curing Oven, and DTF supplies, and save over $700! Get everything you need for a powerhouse DTF printing workflow in one purchase.
Training:
- Training is required for all Prestige R2 purchases. Choose from the following options:
- Virtual Training: Included with purchase
- On-Site Training: Additional $2500
Choose from one of the following options:
- 16x20 Oven
- Prestige R2
- DigiRIP RIP Software
- Phoenix Air 16x20 Curing Oven
- DTF Station Warm Peel DTF Film A3+ (13") x 109 Yard Roll
- Color Max Ink (CMYK+W) 1kg
- Color Prime Hot Melt Powder - 1kg
- Prestige DTF Printer Cleaning Solution 250ml
- Isopropyl Alcohol 16oz
- Lintless Wipe 4 x 4 30 Each
- DTF Station 7" Cleaning Swabs - 50 Each
- A2 Oven
- Prestige R2
- DigiRIP RIP Software
- Phoenix A2 Curing Oven
- Purifier MINI Portable Air Filter
- DTF Station Warm Peel DTF Film A3+ (13") x 109 Yard Roll
- Color Max Ink (CMYK+W) 1kg
- Color Prime Hot Melt Powder - 1kg
- Prestige DTF Printer Cleaning Solution 250ml
- Isopropyl Alcohol 16oz
- Lintless Wipe 4 x 4 30 Each
- DTF Station 7" Cleaning Swabs - 50 Each
Prestige R2 DTF Printer
Print with precision and flair with the Prestige R2 DTF Printer! With its chic, integrated design, this printer combines elegant desktop convenience with powerful performance for all those looking to get started with DTF.
Features:
- Speed: 27 sq. ft. / hour, 6pass
- White Ink Management System (WIMS): timed white ink stirring system to circulate and maintain white ink inside printer
- Passive Auto-Cleaning: when printer is left on, it will automatically maintain and clean printhead every 4 hours
- Active Auto-Cleaning: during set intervals (even during printing), printer can stop to clean printhead
- Head Strike Sensor: helps prevent damage to printhead
- 1 Liter bulk ink cartridges: more ink for all your printing needs
- Auto Ink Alert System: informs user when ink is running low
- Automatic Film Sensor: if film runs out/is not detected, stops printing
Benefits:
- Size: Desktop sized
- Great for beginners: perfect balance of power and affordability
- Easy access/repair: intuitive, labeled board design and connections for easy access and repair
What's Included:
- Limited Warranty Policy
- Power Cord
- Tools
- Ink Dampers
- Ink Filters
- Ink Tube
- Ink Diverter
- USB Dongle
- Ribbon Cables
- Screws
- Feed roller components
Specifications:
- Printer head: Dual Epson XP600 print heads
- Mainboard: Honson
- Interface: TCP
- Software: DigiRIP RIP Software
- Max. Film Width: to 13" (33 cm)
- Printing Speed: 27 sq ft / hour, 6pass
- Machine Weight: 88 lbs
- Packaging Weight: 110 lbs
- Dimensions:
- Printer: 29" x 14" x 14"
- Packaging: 32 1/4" x 15 3/4" x 15 3/4"
- Daily Output (Based on design size as 12" x 14", 8 hrs per day): 160 pcs
- Suitable: Entry Level
Applicable Industries
- Garments
- Tote Bags
- Caps
- And more!
Fabrics:
- Cotton
- Polyester
- PU
- And more!
Compatible With
- DigiRIP RIP Software
- Phoenix Air 16x20 Curing Oven
- Phoenix A2 Curing Oven
- Seismo M16 DTF Powder Applicator and Dryer
--------------------------------------------------
Phoenix Air 16x20 Curing Oven
Phoenix Air 16x20 Operation Manual
Note: It is recommended to turn on the air purifier ONLY while the oven timer is running. Leaving the air purifier on for prolonged periods of time may increase the overall temperature of the oven beyond recommended curing temperature.
The Phoenix Air 16x20 Curing Oven is perfect for curing large film sizes, such as 13" x 19", 14" x 16", 16" x 20", and more! This oven comes with a purifier unit built-in to ensure the safety of your production space. It has a digital control unit that is easy to set and allows precise settings of temperature and time for consistent results. A fusing process is started at the touch of a button. After the set time has elapsed, an acoustic signal sounds alerting you to remove the transfer film.
Note: Unlike the previous Phoenix 16x20 Curing Oven, the Phoenix Air 16x20 oven uses an open-top/platform, rather than a tray, to cure films. See the Phoenix A3+ Curing Oven and A2 Curing Oven for similar heating methods.
Phoenix Air 16x20 Curing Oven can be bundled with the Prestige A3+R DTF Printer.
Includes:
- Handles come unassembled
- Power cord
- Training Video
- 1-year warranty
-
Lifetime Tech Support*
- *Only for active customers who have purchased DTF inks or supplies within the last 2 months
Features:
- Cure Transfers within a minute at 230~248°F
- Bottom Heating Element Rather than Top
- Self Contained Purification system
- Replace Filter 1~3 months depending on usage
Benefits:
- Easy to use
- Built-in purifier - save space & money
Specifications:
- Voltage: 110V
- Power: 0.88KW
- Temperature Range: 0-150°C / 300°F
- Machine Size: 29"W x 21"D x 7.75"H
- Packaging Size: 31"W x 25"D x 10.75"H
- Product Weight: 30 lbs
- Packaging Weight: 35 lbs
--------------------------------------------------
DTF Station Phoenix A2 Curing Oven - 15" x 24"
What's the best curing method for YOUR business?
Features:
- Contact Heating - The heating plate makes melting more uniform, and reduces chances of damage during transportation as well.
- Lower Melting Temperature - With melting temp. of 250°F, melting of your DTF powder is more uniform, and the adhesion of your design is stronger.
- Countdown Reminder - Timely reminder to check the melting state.
- 1 Year Warranty
Specifications:
- Heating Platform: 15"x24"
- Heating Method: Contact Heating
- Heating temperature: 0-130°C (266°F) (Adjustable)
- Heating Time: 0-999S (Adjustable)
- Application: DTF Film Heating
Applicable Industries:
- Curtain
- Canvas Shoes
- Bedding
- Canvas Bag
- Hold Pillow
- Trousers
-----------------------------------------------------------------
DTF Station Purifier MINI Portable Air Filter
The Portable Air Filter absorbs and filters any gases or dust and can achieve 99.97% purification rate, which prevents environmental pollution.
Benefits:
- Strong Ventilation
- Multi-angle adjustable hose
- Low noise
- Easy to use
Features:
- Greater Dust Capacity - Square vertical filter core has larger dust capacity than single-layer filter core. Longer service time of filter core.
- Movable And Adjustable - The smoke absorbing pipe can be disassembled, and the length of the pipe can be adjusted.
- Easy To Use - The Purifier is plug-in.
-
47.24 inch Long Hose
-
8" x 8" x 9.5" (W x D x H)
- 9 lbs
Specifications:
- Voltage: 110V
- Wide applications: Soldering iron welding station; Laser welding, engraving, marking, cutting; Chemistry laboratory; Medical treatment, cosmetology, etc.
NOTE: Please replace your filter at least every 3 months
-----------------------------------------------------
DigiRIP RIP Software
The DigiRIP RIP Software is the ultimate choice for direct to film printmakers from DTF Station. With a powerful suite of features, it stands out amongst its peers for its convenience and maximum efficiency. Enjoy a single Direct to Film software package and discover the power of DigiRIP RIP Software today.
- DigiRIP - for printers 16" or smaller
- DigiRIP Pro - for printers 17" or wider
Software Trial Version (15 Day) - Compatible with Windows only
-----------------------------------------------------
DTF Station Warm Peel DTF Film Rolls
Check out this guide on making your own costumes using this DTF film!
Features:
- High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
- Warm Peel: Peel off the film without a long wait after the first press.
- Single Side Matte: Easily distinguish the print side.
Compatible with:
- Any DTF printer on the market - **Recommended use with a roll printer**
- Looking for DTF film sheets instead? Go here.
Instructions:
- Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
- Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
- Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
- Transfer the image by heat press at 330°F for 15sec with medium pressure.
- After the first press,
Option 1: Wait for 4-6 seconds and remove the film gently
Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently - Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
NOTE: DTF Station Film A3 and A3+ Sheets and A3+ (13") Rolls have returned to their normal pricing, after a temporary price decrease.
-----------------------------------------------------
Color Max DTF Ink
Please refer to these instructions on how to switch your machines from DTF Station ink to Color Max Ink.
Features:
- Engineered for DTF printing
- Even and consistent texture without any loss in color vibrancy
- High color density and wide color gamut
- Pairs well with DTF Station DTF Powder and DTF Film
Benefits:
- Consistent and professional print quality
- Tailor-made for reliable DTF printing results
Specifications:
- Size available - 1kg
- Colors available - CMYKW
-
Shelf Life (from Manufacture Date)
-
- CMYK - 1 Year
- White - 6 Months
- Shelf Life (from Opening Date)
- CMYK - 6 Months
- White - 3 Months
-
Color Max DTF Ink MSDS_Cyan
-
Color Max DTF Ink MSDS_Magenta
-
Color Max DTF Ink MSDS_Yellow
-
Color Max DTF Ink MSDS_Black
- Color Max DTF Ink MSDS_White
-----------------------------------------------------
Color Prime Hot Melt Powder for Direct to Film
Hot Melt Powder Material Safety Data Sheet
Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!
Features:
- After baking the powder, solid white for more vibrant colors
- Even and regular particles for quality graphics and good adherence
Sizes:
- 1 kg
Instructions (for use with DTF Station Warm Peel film):
- Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
- Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
- Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
- Transfer the image by heat press at 330°F for 15sec with medium pressure.
- After the first press,
Option 1: Wait for 4-6 seconds and remove the film gently
Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently - Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.
WARNING
-
Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
- Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.
NOTE
- DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
- Ecofreen hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
- The designed fabrics or printed shirts have a good wash characteristics.
- The fabric has very slight hand feel touch.
- The process is much faster than Vinyl printing (Vinyl Printer).
------------------------------------------
Prestige DTF Printer Cleaning Solution
NOTE: Color may vary
Prestige DTF Printer Cleaning Solution is suitable for running maintenance on DTG and DTF printing machines, including the Prestige A3+ Desktop DTF Printer and more! Using this solution regularly will extend the life of your printer.
-----------------------------------------------------
DTF Station Isopropyl Alcohol 16oz
99% Isopropyl alcohol can clean your water-based digital inks and it can remove unwanted ink splashes without scratches, unlike regular alcohol.
Use this ONLY on Printhead Guards, Encoder Strip, Encoder Wheels, and Platens or areas where unwanted ink splashes on metals/ plastic. Please note this may change/damage certain paints on metal or plastic. Use with care.
*Please contact us if you are not sure whether this product would be a good solution.
Use this product with our lint-free wipe.
Do not use this product on printheads, capping station, wiper blade, and any other areas not specified above. Please note that this product can damage your parts if used improperly. It is also not intended for use on the skin.
Wash face, hands, and any exposed skin thoroughly after handling the product.
Do not insert this into the tube/ lines.
When using this product do not eat, drink or smoke. Please wear protective gloves/protective clothing/eye protection/face protection.
-----------------------------------------------------
DTF Station Lint Free Wipes 4" x 4" - 30 Sheets
Ultra soft, non-abrasive, lint-free wipes are designed for sensitive surfaces such as printhead and encoder strip.
They are 99.999% pure and guaranteed safe for cleaning printhead surface, encoder strip and capping station.
Great for printhead overnight soaking / locking.
-----------------------------------------------------
DTF Station 7" Cleaning Swabs - 50 Each
Cleaning Swabs to use alongside DTF Station printers.
These Foam Cleaning Swabs are perfect for detailed cleaning on various parts of DTF Station's printers. Available in packs of 50 swabs each.
Features
- Foam Head
- Pairs well with all DTF Station printers
Benefits
- Narrow form allows for detailed cleaning of small parts/areas
Specifications
- Swab Material: Foam
- Swab Length: 7 inches
- Quantity: 50 swabs in each pack