DTF Supplies Redefined: Color Prime Universal Film
Discover the next generation of direct-to-film printing with Color Prime Universal Film, designed to deliver vibrant prints and consistent results specifically for all DTF Station Prestige printers. This revolutionary film features tailored printing profiles to redefine your DTF printing experience today!
Key Features:
-
High Ink Loading Layer: Achieve stunning DTF prints with enhanced color saturation and depth, utilizing extra layers of color or white ink.
-
Universal Peel Technology: Enjoy flexibility with both hot and cold peel options, allowing you to choose your preferred method with ease.
-
Distinct Matte Side: Easily identify the print side of the film with its matte finish for hassle-free printing.
Sizes Available:
- A4 (7.87") x 109yd
- A3+ (13") x 109yd
-
17.7" x 109yd
- A1 (23.4") x 109yd
Specifications:
-
Thickness: 83µm
-
Suggested transfer temp. and time: 160°C (320°F) at 10 to 15 seconds.
-
Suggested curing temp: 125°C (257°F) for shaker machines, 140°C (284°F) for desktop curing oven.
Application Instructions:
-
Print your design on the matte side of the film in mirror mode (CMYK >> White Ink).
-
Evenly apply hot melt powder and remove any excess.
-
Cure the hot melt powder using the recommended temperatures above.
-
Transfer the image using a heat press at medium pressure, following the specified temperature and time.
-
Gently peel away the film.
-
For a softer hand feel, reheat the design using a heat press at 137°C (280°F) for an additional 5 seconds at medium pressure.
Compatible with:
-
DTF Station Prestige DTF Printers
- Any DTF printer on the market
WARNING
- Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately.
- For DTG printers, powder should NOT be applied on the platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.