Your Day in Day Out Cutting Solution
The vinyl cutters of the D Series are part of Summa's top-level S Class 2 range. The D Series unites legendary S Class power and precision with an efficient and affordable drag knife cutting head. Boasting an astonishing array of industry-first innovations and built-in capabilities, the S2™ D Series does more than any other vinyl cutter in its class.
Specifications for S2 D75
-
Cutting Type: Drag knife with TurboCut and Tagential Emulation Modes
-
Cutting Width: 74.2 cm (29.2 inch), Extended Mode: material width
-
Cutting Speed: All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal
-
Axial Acceleration: Up to 4 G
-
Maximum Acceleration: Up to 5.5G diagonal
-
Alignment Type: OPOS X, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
-
Tracking Performance: Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
-
Accuracy: 0.2 % of movement or 0.25 mm, whichever is greater
- Cutting Force: 0-400 grams of down-force, in 5 gram increments
-
Display Languages: English; French; German; Dutch; Italian; Spanish; Polish; Portuguese
-
Connectivity: USB, Ethernet
-
Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
-
Dimensions: 141 (W) x 68 (D) x 111 (H) cm (55.5 (W) x 26.8 (D) x 43.7 (H) in.)
- Shipping Weight: 69 kg (152 lbs)
- Operating Temperature: 59˚ to 95˚C (15˚ to 35˚F)
- Standard Accessories: Summa GoSign software, Summa CutterControl & MacSign plug-ins, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
Specifications for S2 D120
-
Cutting Type: Drag knife with TurboCut and Tagential Emulation Modes
-
Cutting Width: 120 cm (47.2 inch), Extended Mode: material width
-
Cutting Speed: All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal
-
Axial Acceleration: Up to 4 G
-
Maximum Acceleration: Up to 5.5G diagonal
-
Tracking Performance: Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
-
Accuracy: 0.2 % of movement or 0.25 mm, whichever is greater
- Cutting Force: 0-400 grams of down-force, in 5 gram increments
-
Display Languages: English; French; German; Dutch; Italian; Spanish; Polish; Portuguese
-
Connectivity: USB, Ethernet
-
Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
-
Dimensions: 187 (W) x 68 (D) x 111 (H) cm (73.6 (W) x 26.8 (D) x 43.7 (H) in.)
- Shipping Weight: 86 kg (189 lbs)
- Operating Temperature: 59˚ to 95˚C (15˚ to 35˚F)
- Standard Accessories: Summa GoSign software, Summa CutterControl & MacSign plug-ins, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
Specifications for S2 D140
-
Cutting Type: Drag knife with TurboCut and Tagential Emulation Modes
-
Cutting Width: 135 cm (53.1 inch), Extended Mode: material width
-
Cutting Speed: All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal
-
Axial Acceleration: Up to 4 G
-
Maximum Acceleration: Up to 5.5G diagonal
-
Tracking Performance: Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
-
Accuracy: 0.2 % of movement or 0.25 mm, whichever is greater
- Cutting Force: 0-400 grams of down-force, in 5 gram increments
-
Display Languages: English; French; German; Dutch; Italian; Spanish; Polish; Portuguese
-
Connectivity: USB, Ethernet
-
Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
-
Dimensions: 202 (W) x 68 (D) x 111 (H) cm (79.6 (W) x 26.8 (D) x 43.7 (H) in.)
- Shipping Weight: 90 kg (198 lbs)
- Operating Temperature: 59˚ to 95˚C (15˚ to 35˚F)
- Standard Accessories: Summa GoSign software, Summa CutterControl & MacSign plug-ins, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
- Optional Accessories: Roll-up system for Summa S Class 2 140 and Summa S Class 2 160
Specifications for S2 D160
-
Cutting Type: Drag knife with TurboCut and Tagential Emulation Modes
-
Cutting Width: 158 cm (62.2 inch), Extended Mode: material width
-
Cutting Speed: All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal
-
Axial Acceleration: Up to 4 G
-
Maximum Acceleration: Up to 5.5G diagonal
-
Tracking Performance: Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long up to 4 m long on rolls over 760 mm wide
-
Accuracy: 0.2 % of movement or 0.25 mm, whichever is greater
- Cutting Force: 0-400 grams of down-force, in 5 gram increments
-
Display Languages: English; French; German; Dutch; Italian; Spanish; Polish; Portuguese
-
Connectivity: USB, Ethernet
-
Power Requirements: 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
-
Dimensions: 225 (W) x 68 (D) x 111 (H) cm (88.6 (W) x 26.8 (D) x 43.7 (H) in.)
- Shipping Weight: 114 kg (251 lbs)
- Operating Temperature: 59˚ to 95˚C (15˚ to 35˚F)
- Standard Accessories: Summa GoSign software, Summa CutterControl & MacSign plug-ins, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
- Optional Accessories: Roll-up system for Summa S Class 2 140 and Summa S Class 2 160
Summa Cutter Warranty Statement