DTF Station Hot Peel Film Rolls

Check out this guide on making your own costumes using this DTF film!

Features:

1. High Ink Loading Layer: You can lay down more color / white to create rich colored decorated DTF prints.
2. Hot Peel: Peel off the film without a long wait after the first press.
3. Single Side Matte: Easily distinguish the print side.

Compatible with:

• Any DTF printer on the market - **Recommended use with a roll printer** 
• Looking for DTF film sheets instead? Go here. 

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min).   Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press,
    Option 1: Wait for 4-6 seconds and remove the film gently
    Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.