EasyWeed ® Electric Heat Transfer Vinyl (14.5" Actual, 14.25" Lens)
Electrify Your Look With Unique Finishes If you're looking to take your designs to the next level, EasyWeed Electric has a finish or pattern just for you! You've never seen a heat applied material like EasyWeed Electric. The colors are vibrant with a pearlescent metallic sheen. EasyWeed Electric comes on a pressure-sensitive carrier which makes cutting detailed designs and logos a breeze. EasyWeed Electric is durable wash after wash and maintains its bright color and brilliant finish. If you're looking to provide multi-color designs, EasyWeed Electric can be layered. EasyWeed Electric is 90 Microns/ 3.5 Mils and is a PU composition
Siser EasyWeed Electric Heat Transfer Vinyl Applies To:
Application Instructions (Home Iron):
Set iron dial between Cotton and Linen. Cover design with Heat Transfer Cover Sheet or Multipurpose Paper. Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure for 10-15 seconds. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds. Peel carrier hot or cold.
Application Instructions (Heat Press):
Cut in reverse and weed excess material. Preheat garment for 2-3 seconds. Apply design at 305 °F / 150 °C. Use medium pressure for 10-15 seconds. Peel carrier hot or cold.
Laundering:
Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Do not bleach or dry clean. Dry on normal dryer setting.
siser-heat-transfer-vinyl-instructions