Every brand sets its own warranty, and terms can differ by model. Before you send a machine anywhere, contact All American Print Supply first. We check your coverage, tell you whether it is a manufacturer warranty case, and point you to the right team.
- Epson SureColor (DTG and F series): 1 year on defects in materials and workmanship. Epson service plans extend coverage up to 4 years in total, and some models have usage limits. Misuse, skipped maintenance and unsuitable garments are not covered. Epson handles repairs through its Preferred support line.
- DTF Station: 1 year on non-consumable parts. Print heads are covered for 12 months when training is completed and the signed disclosure form is returned within 60 days. Using non-DTF Station ink, film or powder, or skipping the maintenance shown in the setup videos, voids the warranty. DTF Station handles claims through a support ticket.
- xTool: Usually 12 months on main parts (24 months on the F2 Ultra, or 36 with xToolCare). Wear parts and laser tubes have shorter terms. Machines bought from unauthorized sellers are not covered. xTool troubleshoots remotely, then repairs or replaces.
- eufyMake E1: 12 months on the printer, 3 months on the print head and 12 months on the laminator, from the invoice date. eufyMake handles claims at support@eufymake.com with proof of purchase.
- Sawgrass SG500 and SG1000: 3 years or 100,000 prints for printers bought on or after October 1, 2025 (2 years before that), for the original buyer. Non-genuine inks can void it.
- Mimaki: 12 months on printers and 90 days on maintenance parts, with longer service agreements available. Registration and an installation report within 30 days are required. Non-Mimaki inks, skipped maintenance and head strikes are not covered. We work with Mimaki to arrange service.
- Uninet iColor: 1 year on most models once registered (the iColor 600 has 3 years, plus 5 on the LED print head). Register your printer, because some models start with only 90 days. Non-Uninet supplies can void it. Uninet Technical Support handles claims.
- STS: Defective printers are repaired or replaced. Shakers have 1 year, with 60 days of on-site service. Mixing STS ink with other inks is not covered.
Accessories and wear parts generally have little or no warranty. Full terms are on each product page and in the paperwork that ships with the machine.

















































