DTF Station Prestige A4 Shaker Bundle - Advanced

Save $1,042.92
DTF StationSKU: BNDL-PRA4-SHAKER-ADV-C
Rated 5.0 out of 5
Based on 1 review

Price:
Sale price$4,303.99 Regular price$5,346.91
Earn 4303 AA points. Join Now
PA Warehouse - In Stock Dropshipped. Expect lead time
3020 Darnell Rd Philadelphia, Pennsylvania 19154
CA Warehouse - In Stock Dropshipped. Expect lead time
17511 Valley View Avenue Suite A Cerritos, California 90703
714 576-2900
Synchrony Disclaimer for 'No Interest for 12 months or 5.99% APR for 36 Months'... Special Financing for 12^ or 36++ months on qualifying purchases with Synchrony
*Special 12 Months offer effective
On qualifying purchases made with your Sewing & More credit card. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required.
^Offer applies only to single-receipt qualifying purchases. No interest will be charged on the promo balance if you pay it off, in full, within the promo period. If you do not, interest will be charged on the promo balance from the purchase date. The required minimum monthly payments may or may not pay off the promo balance before the end of the promo period, depending on purchase amount, promo length and payment allocation. Regular account terms apply to non-promo purchases and, after promo period ends, to the promo balance. For New Accounts: As of 07/16/24: Purchase APR 34.99%. Penalty APR 39.99%. Min Interest Charge $2. A promo fee will be charged equal to 2% of the amount financed on an equal payment no interest promotion of 18 months or more. Existing cardholders: See your credit card agreement terms. Subject to credit approval. We reserve the right to discontinue or alter the terms of this offer at any time.

5.99% APR with fixed monthly payments for 36 months++
On qualifying purchases made with your Sewing and More credit card. Fixed monthly payments required for 36 months.
++Qualifying purchase amount must be on one receipt. A promo fee does not apply to this offer. Interest will be charged on the promo purchase, including related optional debt cancellations fees, from the purchase date at a reduced 5.99% APR, and fixed monthly payments are requirement until paid in full. These payments are equal to 3.0417% of initial total promo purchase amount, rounded up to the next whole cent. These payments may be higher than the payments that would be required if this purchase was a non-promo purchase. During the last month(s) of the promo period the required monthly payment may be reduced due to the prior months' rounding. Regular account terms apply to non-promo purchases. New Accounts as of 7/16/24: Purchase APR 34.99%. Penalty APR 39.99%. Min Interest Charge $2. Fee will be charged equal to 2% of the amount financed on an equal payment no interest promotion of 18 months or more. Existing cardholders: See your credit card agreement terms. Subject to credit approval.

Description

Kit Includes:

Prestige A4 DTF Printer

Prestige A4 User Manual

Prestige A4 Spec Sheet

Prestige A4 Maintenance Chart

Presenting the Prestige A4 DTF Printer, DTF Station's smallest DTF printer ever! Perfect for garment printing enthusiasts starting out with direct to film printing, this desktop printer is available in three color options – classic (black and grey), pink, and mint. It ensures high-quality and reliable results at 9 square feet per hour, and its compact design means you can place this printer just about anywhere.

Features:

  • Speed: 9 sq. feet per hour! Fast speed at a comparably low price
  • Quality: Epson L805 Print Head
  • 3 Color Options: Classic (Black & Grey), Pink, and Mint

Benefits:

  • Size: Compact yet powerful
  • Perfect for entry level DTF printing
  • Intuitive, elegant design for easy setup and use

What's Included:

  • Warranty Policy
  • 30x Microfiber cloth
  • 1x Ink tube (1 meter)
  • 5x Ink damper
  • 3x 20ml Syringes
  • 1x Splash tray
  • 10x Cotton Swabs
  • 1x Screwdriver
  • 10x Disposable plastic gloves
  • 1x USB cable
  • 1x power cord
  • 1x lithium grease
  • 1x U-disc

    Specifications:

    • Printer head: Epson L805
    • Mainboard: Epson Original (Converted)
    • Interface: USB
    • Software: DigiRIP RIP Software
    • Printing Width: 7.87"
    • Printing Speed: 9 sq ft / hour(1440*720DPI)
    • Machine Weight: 22.71 lbs
    • Packaging Weight: 34.17 lbs
    • Dimensions:
      • Printer (WxLxH): 23" x 10" x 8.3"
      • Packing (WxLxH): 32.3" x 14.25" x 12.2"
    • Daily Output (Based on design size as 7.87" x 11.81", 8 hrs per day): 70 pcs
    • Suitable Users: Starter

    Applicable Industries:

    • Tote Bags
    • T-shirts
    • Caps
    • Garments
    • And more!

    Fabrics:

    • Cotton
    • Polyester
    • PU
    • And more!

    Compatible With:

    • DigiRIP RIP Software
    • DTF Station Seismo S20 Powder Station
    • DTF Station Phoenix Air 16x20 Curing Oven

      -----------------------------------------------------


      DigiRIP RIP Software

      The DigiRIP RIP Software is the ultimate choice for direct to film printmakers from DTF Station. With a powerful suite of features, it stands out amongst its peers for its convenience and maximum efficiency. Enjoy a single Direct to Film software package and discover the power of DigiRIP RIP Software today.

      • DigiRIP - for printers 16" or smaller
      • DigiRIP Pro - for printers 17" or wider

      Compatible With:

      DigiRIP

      • Prestige A4 DTF Printer
      • Prestige R2 DTF Printer

      DigiRIP Pro

      -------------------------------------------------

      Color Prime Universal Peel DTF Film Rolls

      Features:

      • Universal Peel (Hot or Cold Peel) - use the film as a hot or cold peel, depending on your preference
      • Enhanced print quality

      Specifications:

      • Thickness: 83um
      • Size: A4 (8.2" x 109 yd)
      • Suggested transfer temp. and time: 160°C (320°F) at 10 to 15 seconds.
      • Suggested curing temp: 125°C (257°F) for shaker machines, 140°C (284°F) for desktop curing oven.

      Instructions:

      1. Print the image onto the matte side of the film in mirror mode.
        1. (CMYK>>White Ink)
      2. Apply hot melt powder evenly and remove excess powder.
      3. Cure hot melt powder using suggested temperatures stated above.
      4. Transfer the image by heat press at medium pressure with suggested temperature and time stated above.
      5. Hot Peel (remove the film gently).
      6. Heat Press again at 137°C (280°F) for 5sec with medium pressure to enhance softer hand feel.

      --------------------------------------------

      Color Max DTF Ink

      Please refer to these instructions on how to switch your machines from DTF Station ink to Color Max Ink.

      Features:

      • Engineered for DTF printing
      • Even and consistent texture without any loss in color vibrancy
      • High color density and wide color gamut
      • Pairs well with DTF Station DTF Powder and DTF Film

      Benefits:

      • Consistent and professional print quality
      • Tailor-made for reliable DTF printing results

      Specifications:

      Compatible With:

      ---------------------------------------------

      Color Prime Hot Melt Powder for Direct to Film

      Hot Melt Powder Material Safety Data Sheet

      Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!

      Features:

      • After baking the powder, solid white for more vibrant colors
      • Even and regular particles for quality graphics and good adherence

      Sizes:

      • 1 kg

      Instructions (for use with DTF Station Warm Peel film):

      1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
      2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
      3. Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
      4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
      5. After the first press,
        Option 1: Wait for 4-6 seconds and remove the film gently
        Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
      6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

         

        WARNING

        • Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately.
        • For DTG printers, powder should NOT be applied on the platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

        Ecofreen Oeko-Tex Certificate

        NOTE

        • DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
        • Ecofreen hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
        • The designed fabrics or printed shirts have a good wash characteristics.
        • The fabric has very slight hand feel touch.
        • The process is much faster than Vinyl printing (Vinyl Printer).

          ----------------------------------------

          Prestige DTF Printer Cleaning Solution

          NOTE: Color may vary

          Prestige DTF Printer Cleaning Solution is suitable for running maintenance on DTG and DTF printing machines, including the Prestige A3+ Desktop DTF Printer and more! Using this solution regularly will extend the life of your printer.

          --------------------------------------------

          DTF Station Isopropyl Alcohol 16oz

          99% Isopropyl alcohol can clean your water-based digital inks and it can remove unwanted ink splashes without scratches, unlike regular alcohol.

          Use this ONLY on Printhead Guards, Encoder Strip, Encoder Wheels, and Platens or areas where unwanted ink splashes on metals/ plastic. Please note this may change/damage certain paints on metal or plastic. Use with care.

          *Please contact us if you are not sure whether this product would be a good solution.

          Use this product with our lint-free wipe.

          Do not use this product on printheads, capping station, wiper blade, and any other areas not specified above. Please note that this product can damage your parts if used improperly. It is also not intended for use on the skin.

          Wash face, hands, and any exposed skin thoroughly after handling the product.

          Do not insert this into the tube/ lines.

          When using this product do not eat, drink or smoke. Please wear protective gloves/protective clothing/eye protection/face protection.

          ----------------------------------------------------

          DTF Station Lint Free Wipes 4" x 4" - 30 Sheets

          Ultra soft, non-abrasive, lint-free wipes are designed for sensitive surfaces such as printhead and encoder strip.

          They are 99.999% pure and guaranteed safe for cleaning printhead surface, encoder strip and capping station.

          Great for printhead overnight soaking / locking.

          -------------------------------------------------

          DTF Station 7" Cleaning Swabs - 50 Each

          Cleaning Swabs to use alongside DTF Station printers.

          These Foam Cleaning Swabs are perfect for detailed cleaning on various parts of DTF Station's printers. Available in packs of 50 swabs each.

          Features

          • Foam Head
          • Pairs well with all DTF Station printers

          Benefits

          • Narrow form allows for detailed cleaning of small parts/areas

          Specifications

          • Swab Material: Foam
          • Swab Length: 7 inches
          • Quantity: 50 swabs in each pack

          Compatible With

          • DTF Station printers
          • All large format digital printers


          average rating 5.0 out of 5
          Based on 1 review
          • 5 Stars
            1 Review
          • 4 Stars
            0 Reviews
          • 3 Stars
            0 Reviews
          • 2 Stars
            0 Reviews
          • 1 Star
            0 Reviews
          100% of reviewers would recommend this product to a friend
          1 Review
          Reviewed by William R.
          Verified Buyer
          I recommend this product
          Rated 5 out of 5
          Review posted

          Product review

          Excellent quality products

          Loading...
          Was this helpful?

          You may also like

          Recently viewed