Support
Machine type
Brand
DTF Station Prestige A4

DTF Station Prestige A4 support

Covers: Prestige A4

The Prestige A4 is DTF Station's smallest DTF printer: an Epson L805-based roll printer that connects by USB and prints from DigiRip (CADlink Digital Factory). Run a head cleaning and nozzle check every morning, clean the cap and wiper every night, and keep the white ink moving. If the ink and paper lights blink in turns, that is a maintenance counter, not a broken printer. Text us.

DTF Station Prestige A4 desktop DTF printer in pink, three-quarter view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Techniques & settings

Warranty & service plans

Manuals & downloads

Watch DTF Station's video: Prestige A4 initial setup

More videos

Introducing the Prestige A4
Prestige A4 roll printing operation
Prestige A4 daily maintenance
Prestige A4 weekly maintenance

Embedded from the manufacturer's official channel.

About the DTF Station Prestige A4

The Prestige A4 is a compact roll-fed direct-to-film printer for small transfers, built on the Epson L805 printer engine and print head. It comes in several colors. It has no screen: the front panel has Epson-style power, ink and paper buttons whose lights tell you when something needs attention. It connects to a Windows PC by USB and prints from DigiRip. In DigiRip, the A4's queue must use the Epson USB port, not TCP/IP.

Maintenance at a glance

How often What to do
Start of every day Shake the white ink, check the waste bottle, run a head cleaning from DigiRip (Devices > Printer Properties) and print a nozzle check
End of every day Clean the capping station, wiper and the area around the print head with DTF cleaning solution, then park the head on the cap
Every week Clean the encoder strip and the printer bed
About once a year Replace the dampers. Expect to replace the print head, cap and wiper every 1 to 2 years with regular use

Where to put it

Aim for a steady room around 70 to 75°F with 35 to 45% humidity. Keep the printer out of direct sun and away from heaters, fans and air-conditioning vents: air blowing across the print head dries the white channels first. Put it on a sturdy, level table and cover it at night to keep dust off.