Support
Machine type
Brand
DTF Station Prestige A3+ and A3+ R

DigiRip (CADlink Digital Factory) setup and printing workflow for Prestige DTF printers

✓ Reviewed by Jason KimUpdated 3 min readFits: DigiRip v11, v12 (CADlink Digital Factory) · Prestige A3+ · Prestige A3+ R · Prestige A4 · Prestige R1 units running DigiRip
Short answer

After installing DigiRip, use Install Printer to add your Prestige: Prestige A3 DTF V2 for the A3+ and A3+ R, Prestige A4 for the A4. Download the printer package from the server and pick the USB-connected printer. The A3+ and A4 queues use the Epson USB port; an R1 running DigiRip prints through Pilot on TCP/IP 127.0.0.1, port 9100. Then import your art at 300 DPI, size it, check the print mode and white settings, and print.

DigiRip is DTF Station's edition of CADlink Digital Factory. It turns your artwork into the color and white layers your Prestige prints. This guide picks up after installation and activation. For licensing, see the DigiRip activation guide.

Add your printer

  1. Connect and power on the printer

    The A3+, A3+ R and A4 connect by USB. Turn the printer on before you add it, so DigiRip can see it.

  2. Install the printer driver

    Click Install Printer and choose your model: Prestige A3 DTF V2 for the A3+ and A3+ R, or Prestige A4 for the A4. Choose the new printer package from the server, click Next, and select the USB-connected printer in the list.

  3. Printer not in the list?

    Check the power and USB cable, and that Windows sees the printer. You can also open Queue > Manage Queues and select the correct USB port there. For the A4, the port must be the Epson USB port, not TCP/IP.

  4. R1 running DigiRip

    The R1 receives jobs through Pilot, not USB. In Queue > Manage Queues, the port must be TCP/IP, address 127.0.0.1, port 9100, and Pilot must be open with a green connection. If jobs don't arrive, allow port 9100 through Windows Defender Firewall and any other security software.

  5. Check the printer from DigiRip

    Open Devices > Printer Properties (the printer status icon). From here you can see status and run head cleanings and nozzle checks. If it won't open, recheck the queue port.

Print a job

  1. Pick the queue

    Each queue holds its own default settings, such as print mode and white. Click the queue tab you want to print to. Double-click the tab, or use Queue > Properties, to see its settings.

  2. Import your artwork

    Click the import icon and add your images. Use 300 DPI art. To check, right-click the image and open Super Size Image, which shows the current resolution and can bring an enlarged image back up to 300.

  3. Size and arrange

    Select an image and set its size on the Job tab with the ratio locked. Set copies with columns and rows, and add margin between designs if you'll cut them apart. Check the film width in the media name at the bottom right.

  4. Check print mode and white

    The active print mode shows at the bottom right. To change the default, open Queue Properties > General > Print Mode. White settings are under Color Layer > Processing Options: queue-wide in Queue Properties, or for one image by double-clicking it. Settings on a single job override the queue.

  5. Turn on the confidence strip

    In Queue Properties > Print Labels, check Enable Confidence Strips and leave Apply Processing Options unchecked. The strip fires every color on every print, which helps keep nozzles open.

  6. Print and save

    Send the job and watch the progress in DigiRip. To reprint later, right-click the finished job and choose Save As. Restore it any time from Jobs > Restore Jobs.

Quick fixes

Problem Fix
Printer shows offline Queue > Manage Queues: switch the port to Null or File, close, wait 30 seconds, reopen and set it back
Print modes look wrong or missing Devices > Manage Devices: select the printer and check the cloud for updates
Features you expect are missing Help > Check for Updates, then Help > Update License File, and restart DigiRip
Faint white line around designs Right-click the job > Easy Adjustments > Transparent Pixels 50 / 50
Slow processing Use PNG instead of large PDFs, close other programs, restart the PC

Still stuck? Text us a photo or short video at (562) 609-4996 with a screenshot of the DigiRip window.

Watch DTF Station's video: installing DigiRip and the Prestige printer driver

Embedded from the manufacturer's official channel.

Common questions

Which driver do I pick for my printer?

Prestige A3+ or A3+ R: Prestige A3 DTF V2. Prestige A4: Prestige A4. Choose the new printer package from the server so you get current print modes.

DigiRip says the printer is offline but the cable is plugged in. What do I do?

Go to Queue > Manage Queues, change the queue's port to Null or File, close the window, wait 30 seconds, reopen it and set the port back to the printer's USB port. If the port isn't listed, check the USB cable and power-cycle the printer.

My printed design has a faint white haze line around it. How do I remove it?

Right-click the job, open Easy Adjustments, and set Transparent Pixels to 50 and 50. DigiRip reprocesses the edges cleanly.

DigiRip is very slow to process. Why?

It's almost always the computer. Close other programs, restart, and use PNG files instead of large PDFs. You can also raise RIP priority under Tools > Options.

I need to activate DigiRip or move it to a new computer.

See our DigiRip activation guide: it covers new computers, lost codes and expired trials.

Did this fix it?