Support
Machine type
Brand
Summa S One vinyl cutter

Summa S One vinyl cutter support

Covers: S One D60 · D75 · D120 · D140 · D160

Everything for the Summa S One drag knife cutters: what the models are, routine cleaning of the drive sleeves, media sensors and Y guide rail, and Summa's user manual. Summa says the sliding surfaces need no lubrication, only cleaning and a dust cover.

Summa S One D75 vinyl cutter on its stand with basket

Setup & first print

Daily & weekly maintenance

Troubleshooting

Software & drivers

Techniques & settings

Manuals & downloads

Watch Summa's video: Introducing the Summa S One series

More videos

How to load media on your Summa S1
How to set cutting pressure on your Summa S1
How to change the blade on your Summa S1

Embedded from the manufacturer's official channel.

About the Summa S One vinyl cutter

The S One is Summa's drag knife roll cutter range, built in widths from the D60 to the D160 (plus a D140FX version). Media is gripped between pinch rollers and silver drive sleeves on the drive drum, and the tool carriage holds the drag knife holder, a pen or a pouncing tool. For safety, Summa ships the knife with its depth set to zero, so turn the knife out before your first cut. An OPOS sensor reads registration marks for print-and-cut work.

Cleaning at a glance

Part When What to do
Whole machine Always Keep it under a dust cover. Clean with a soft cloth and isopropyl alcohol or mild detergent. No abrasives, no lubrication.
Drive sleeves Media slips Unplug, apply a mild glue-removing solvent to the silver sleeves, wait, then scrub with a toothbrush
Media sensors Cutter misreads the media Wipe them out with cotton swabs
Y guide rail Residue on the sliding surfaces Switch off, wipe the four sliding surfaces (two front, two behind) with a cloth and isopropyl alcohol or mild detergent

Where to put it

Summa rates it for 15 to 35°C (59 to 95°F) and 35 to 75% relative humidity, non-condensing. Keep it away from direct sunlight and strong lamps.