Support
Machine type
Brand
Vastex V-100, V-1000 and V-2000HD Manual Screen Printing Presses

Vastex V-100, V-1000 and V-2000HD Manual Screen Printing Presses support

Covers: V-100 · V-1000 · V-2000HD

Vastex makes three families of manual rotary screen printing presses: the entry-level V-100 (up to 4 colors and 4 stations), the commercial V-1000 (up to 8 by 8, with floating print heads) and the industrial V-2000HD (up to 10 by 10, with gas spring heads and micro registration). Most print problems on these presses come from pallets and heads that are not parallel or from missing off contact. Start here for assembly, leveling, lubrication and Vastex's manuals.

Vastex V-1000 4-station 6-color manual screen printing press

Setup & first print

Daily & weekly maintenance

Troubleshooting

Guides are on the way. In the meantime, text our tech team a photo of the problem.

Techniques & settings

Manuals & downloads

Watch Vastex's video: V-1000 head and pallet leveling

More videos

Vastex: overview of the V-2000HD manual press
Vastex: V-2000 micro registration
Vastex: all heads down printing on a V-1000
Vastex: all heads down on a V-2000

Embedded from the manufacturer's official channel.

About the Vastex V-100, V-1000 and V-2000HD Manual Screen Printing Presses

All three Vastex presses are manual rotary presses: screens clamp into print heads on a top hub, garments load onto pallets on a bottom hub, and you rotate the pallets under each head. They differ in how the heads lift and how far they expand.

Which press do you have?

Model Size Print heads
V-100 1 to 4 colors, 1 to 4 stations Coil spring heads with a stop bar. Steel pallets. Tabletop.
V-1000 Up to 8 colors, 8 stations Floating heads that lock into a wheel lock housing on each rotor arm. Standard head for screens up to 6 lb, HD head up to 20 lb.
V-2000HD Up to 10 colors, 10 stations Gas spring heads with wrench-less micro registration and 6-way leveling.

Maintenance at a glance

When What to do
Every day or job Clean lint off moving parts and adjusters. Wipe pallets. Remove spilled ink with mineral spirits.
Monthly Oil the center hub bearings, grease threads and pivots, and inspect for wear (V-1000 and V-2000HD).
New screens or jobs Check off contact (about 1/8 in) and that each head is parallel to its pallet.

Before you print

Assemble with two people and keep tall parts lying flat until you install them. On the V-1000, Vastex says flashing should not go past 15 seconds or 200°F so the rubber pallet tops are not damaged. Keep print heads in the raised position when not in use, and never let a spring-loaded head swing up unrestrained.