Support
Machine type
Brand
Epson SureColor F170

Epson SureColor F170 support

Covers: F170

The SureColor F170 is Epson's letter-size desktop dye-sublimation printer. It uses refillable ink tanks with Epson T49M sublimation ink in black, cyan, magenta and yellow, and prints onto sublimation transfer paper that you heat press onto polyester or polymer-coated blanks. Most problems are a clogged color (often magenta), driver or color settings, or a full maintenance box.

Epson SureColor F170 dye-sublimation printer, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Techniques & settings

Warranty & service plans

Manuals & downloads

Epson's video: SureColor F170 setup

More videos

Epson: SureColor F170 unboxing and setup demo
Epson: loading ink in the SureColor F170
Epson: navigating the F170 control panel
Epson: printing a nozzle check on the F170

Embedded from the manufacturer's official channel.

About the Epson SureColor F170

The F170 prints on cut sheets up to legal width from its paper cassette and supports user-defined sizes from 89 x 127 mm up to 215.9 x 1,200 mm (8.5 x 47.2 in). Ink goes into four refillable tanks on the right side (T49M1 black, T49M2 cyan, T49M3 magenta, T49M4 yellow), the same ink bottles as the F570. There is no white ink, so it is made for white and light-colored blanks. It connects by USB, Wi-Fi or Ethernet, and the driver mirrors the image by default.

Maintenance at a glance

When What to do
When prints look faint, banded or a color is off Print a nozzle check (Maintenance > Print Head Nozzle Check) and clean only if there are gaps
Regularly Look at the ink tanks. Don't print with ink below the lower line, and refill before a tank gets low
Within 25 days of refilling Use up the ink in the tank. Epson's print quality guarantee for ink in the tank is 25 days or the bottle's expiry date, whichever comes first
When the printer asks Replace the maintenance box
At least once a year Fill every tank to the upper line

Where to put it

Epson rates the F170 for 50 to 95 °F and 20 to 80% humidity without condensation. Use it on a flat, stable surface away from direct sunlight, heat sources and rapid temperature or humidity changes, with room above to open the cover. Turn it off with the power button rather than unplugging it, so the head is capped and doesn't dry out.