Support
Machine type
Brand
DTF Station Aries 213 and Aries 113 UV DTF printers

Which RIP software does my printer use? NeoStampa, DigiRIP, Pilot, Garment Creator, Edge Print and Kothari

✓ Reviewed by Jason KimUpdated 3 min readFits: Prestige · Aries · Epson F2100, F2270, F3070, F170, F570, F6370, F6470 · Uninet iColor · STS VJ-628D
Short answer

A RIP turns your artwork into the ink layers the printer lays down, including the white underbase. Current DTF Station Prestige and Aries printers use NeoStampa as the RIP with DTF Station Pilot as the control software, while older Prestige desktop printers use DigiRIP (CADlink Digital Factory). Epson DTG printers print through Epson Garment Creator or a commercial RIP such as Kothari, and Epson's large sublimation printers use Epson Edge Print.

RIP, control software and driver: what's the difference

  • RIP: where you place and size designs. It converts your artwork into color and white layers, applies color profiles, and controls things like white choke and ink amounts.
  • Control software: on many DTF printers, a second program takes the data from the RIP and drives the printer. It's also where you run nozzle checks, cleanings and calibrations.
  • Driver: some printers, like Epson's desktop sublimation printers, print from any design program through a regular printer driver.

Printer by printer

Printer RIP (where you lay out designs) Control software or driver
Prestige A3+, A3+R, A4 DigiRIP The Prestige printer driver inside DigiRIP, over USB
Prestige R1 NeoStampa (some earlier units shipped with DigiRIP) DTF Station Pilot, over Ethernet
Prestige R2 Pro NeoStampa on current units, DigiRIP on early units DTF Station Pilot on current units, Hosonsoft (PrintExp) on early units
Prestige R2 (original) DigiRIP, or NeoStampa after an upgrade Hosonsoft (PrintExp) on most units
Prestige L2, XL2, XL2 Pro, XL3, XL4 and X6 NeoStampa DTF Station Pilot
Aries 113, 213 and 124 (UV DTF) NeoStampa DTF Station Pilot
Epson F2100 and F2000 (DTG) Epson Garment Creator (free), or Kothari Print Pro None needed: the RIP sends the job to the printer
Epson F2270 (DTG and DTF film) Epson Garment Creator 2, or a commercial RIP such as DigiRIP DTG Hybrid Edition None. Epson provides no regular printer driver.
Epson F3070 (DTG) Epson Garment Creator 2, or a commercial RIP such as Kothari Print Pro None. Epson provides no regular printer driver.
Epson F170 (sublimation) Your design program Epson printer driver
Epson F570 (sublimation) Your design program, or Epson Edge Print Pro, which ships with it Epson printer driver
Epson F6370, F6470 (sublimation) Epson Edge Print Epson communication driver and Epson Edge Dashboard
Uninet iColor iColor ProRIP or ProRIP Essentials Set up within ProRIP
STS VJ-628D Ask us which RIP your setup uses Mutoh Status Monitor (MSM) and the VJ-628 printer driver

Not sure which version you have? Check the software's Help > About screen, or text us your printer's serial number and we'll look it up.

What to know about each

NeoStampa

The RIP on current DTF Station printers. It's licensed with a USB dongle. The dongle is the license, so keep it safe. Setup steps are in our NeoStampa install guide, and moving it to a new PC is in our new computer guide.

DigiRIP (CADlink Digital Factory)

DTF Station's edition of Digital Factory, licensed with an activation code on one computer at a time, Windows only. There are two editions: a DTF edition, and a DTG Hybrid Edition that is required for DTG printers. See DigiRIP setup and DigiRIP activation.

DTF Station Pilot and Hosonsoft

These are control software, not RIPs. They run the printer and its maintenance functions. Pilot doesn't run on a Mac or a Surface tablet. Don't switch an original R2 from Hosonsoft to Pilot on your own: some units can't run Pilot. See Hosonsoft or Pilot.

Epson Garment Creator

Epson's free software for its DTG printers. It accepts TIFF, JPEG, PNG and BMP files, builds the white underbase for you, and on the F2270 has a Film mode for DTF. See our DTG artwork guide.

Kothari Print Pro

A commercial RIP for Epson DTG printers, including the F2000, F2100 and F3070, that some shops choose for more control over color and white ink. Ask us about compatibility and licensing before you buy.

Epson Edge Print

Epson's RIP for its larger sublimation printers. It uses EMX media files that hold the color profile and print settings for each paper. See our Edge Print guide.

Artwork tips for any RIP

Whatever RIP you use, send it clean artwork: the right size, high resolution, a transparent background and sRGB color. See artwork for DTF transfers.

Common questions

Do I need to buy a separate RIP for my DTF printer?

Not for a DTF Station printer. Prestige and Aries printers are set up for NeoStampa or DigiRIP, and current units come with NeoStampa. Text us your model and serial number if you're not sure which one you have.

Is DigiRIP the same as CADlink Digital Factory?

Yes. DigiRIP is DTF Station's edition of Digital Factory.

Can I run these programs on a Mac?

DigiRIP runs on Windows 10 or 11, and DTF Station Pilot won't run on a Mac or a Surface tablet. Plan on a Windows PC for DTF Station printers.

Which DigiRIP edition do I need for an Epson DTG printer?

The DTG Hybrid Edition. DTF Station says the DTF-only edition is not compatible with DTG printers.

Can I move from DigiRIP to NeoStampa?

Yes, there's a DigiRIP to NeoStampa upgrade. On a Prestige R2 or R2 Pro, the control software may need to change too, so check with us before you buy.

Did this fix it?