Support
Machine type
Brand
Epson SureColor F6370

Epson F6370 and F6470 software setup: Epson Edge Print basics, EMX media files and firmware updates

✓ Reviewed by Jason KimUpdated 2 min readFits: F6370 · F6470 · F6470H
Short answer

Install the Epson communication driver first, then Epson Edge Print (the included RIP) and Epson Edge Dashboard. In Edge Print, download the EMX file for your paper, register its media settings to the printer, run Media Adjust, then add your job, pick the media and print. Before you switch computers, delete the Edge Print license from the old one. Update firmware with Epson Edge Dashboard or EPSON Software Updater (F6470) or LFP Remote Panel 2 (F6370), and never power off during an update.

What to install

Software What it does Models
Epson communication driver Lets Edge Print, Edge Dashboard or a commercial RIP talk to the printer. Install it first F6370, F6470
Epson Edge Print Epson's RIP for laying out and printing jobs (Windows) F6370, F6470
Epson Edge Dashboard Monitors the printer, downloads EMX media files and writes media settings to the printer. On the F6470 it can also notify you of and install firmware updates F6370, F6470
LFP Remote Panel 2 Printer utility Epson uses for F6370 firmware installs F6370
EPSON Software Updater, EpsonNet Config SE Software and firmware updates; network settings from your computer F6470

Download everything from your model's page on epson.com (epson.com/support/f6370, epson.com/support/f6470 or epson.com/support/f6470h). The F6470 also ships with an Edge Print disc.

First print with Edge Print and an EMX file

An EMX file is Epson's free print settings file for a specific paper. It holds two things: print information for Edge Print (the ICC profile, passes and resolution) and media settings for the printer (such as platen gap, tension and heater values).

  1. Register the printer

    Start Edge Print. If your printer isn't listed, add it in Tool > Preferences (Printer). On Windows, Edge Dashboard finds printers automatically once the communication driver is installed and the printer is on standby.

  2. Get the EMX file for your paper

    With the computer online, choose Tool > Manage Preset > Manage Print Info, click Add, choose Acquire EMX File and pick the file for the paper you use.

  3. Write the media settings to the printer

    Open Epson Edge Dashboard (Tool > Start Epson Control Dashboard in older versions of Edge Print), go to Media Settings, select the media from the EMX file and copy it to a numbered media slot on the printer, then click Apply while the printer is idle.

  4. Run Media Adjust

    Load the paper, select that media number on the printer's panel, and run Media Adjust from the printer's settings menu. Epson warns that skipping it can cause banding or graininess.

  5. Add and print the job

    Click Add in the job toolbar or drag the file into the Job List. Epson recommends PDF. Select the job, open Basic Settings to choose media size, media name and quality, then click Print. You can't print while the printer tab shows an error, a maintenance operation, or power off.

Moving Edge Print to a new computer

  1. Delete the license on the old computer

    With the old computer online, choose Tool > Preferences (License), select the license and click Delete. Uninstall Edge Print only after this.

  2. Install and register on the new computer

    Install Edge Print, start it, click Start when it asks for license authentication, choose Online and enter the serial number from the label inside the software package. Then register your printer.

If you can't delete the license because the old computer failed, contact Epson support. Don't install on the new computer and hope it transfers.

Firmware updates

  • Check your version: on the F6370, the Setup menu's Printer Status shows Firmware Version.
  • F6470: Epson Edge Dashboard or EPSON Software Updater notifies you of new firmware and walks you through installing it. In North America, Epson says to check epson.com/support for software updates.
  • F6370: if an install fails, Epson's fix is to restart the printer and reinstall the firmware with LFP Remote Panel 2.
  • Never turn off the computer or the printer while firmware is updating.

Watch Epson's video: Using Epson Edge Print

Embedded from the manufacturer's official channel.

Common questions

My computer died and Edge Print was on it. Can I reinstall it?

Edge Print's license has to be deleted from the old computer before it can be registered on a new one. If the old computer can't be started to delete it, Epson's guide says to contact your local Epson support.

Where is the Edge Print serial number?

On a label inside the software package. You need it to register the license, so keep the package.

Can I skip the license and print now?

Edge Print can run as a 30 day trial if you skip license authentication. After that it stops until you authenticate.

My laptop has no Ethernet port.

The F6370 and F6470 connect by USB or wired network. A USB to Ethernet adapter on the computer is a common fix. Ask us if you're unsure.

The printer says F/W Install Error (F6370).

Epson says turn the printer off, wait a few minutes, turn it on, and reinstall the firmware with LFP Remote Panel 2. If the message keeps coming back, contact Epson support.

Do I have to use Edge Print?

No. Both printers also work with commercial RIP software through the Epson communication driver. Edge Dashboard can still download EMX files for you to import into another RIP.

Did this fix it?