Support
Machine type
Brand
BBC Flash Dryers: Black Flash, Afford-A-Flash, Air Flash and Auto Flash

BBC Flash Dryers: Black Flash, Afford-A-Flash, Air Flash and Auto Flash support

Covers: Black Flash (BF1 to BF5) · Afford-A-Flash (LC1600 to LC2700) · Air Flash (AF2-4000) · Auto Flash · Flash-Amatic

BBC Industries flash dryers are infrared panel heaters for flash curing screen printing ink between colors. The Black Flash and Afford-A-Flash sit on swing-away stands, the Air Flash adds forced air, and the Auto Flash mounts on an automatic press. Give them 5 to 10 minutes to heat up, start about 2 to 3 inches above the platen, and keep anything flammable at least 3 feet from the heater face.

BBC Black Flash infrared flash dryer on its five leg swing-away stand

Setup & first print

Troubleshooting

Techniques & settings

Manuals & downloads

About the BBC Flash Dryers: Black Flash, Afford-A-Flash, Air Flash and Auto Flash

BBC Industries flash dryers are flat infrared panel heaters that partly cure (flash) a layer of screen printing ink so the next color can go on top without smearing. BBC says they can fully cure ink but doesn't recommend it: a conveyor dryer is faster for that. All BBC flashes take 5 to 10 minutes to reach temperature.

Models covered

Model What it is Mounts on
Black Flash Infrared panel, 16 x 16 to 28 x 28 in. Some models have a built-in heat control dial Swing-away floor stand
Afford-A-Flash Lower cost infrared panel, 16 x 16 or 18 x 18 in Caster stand
Air Flash Infrared plus forced air, with a built-in heat control dial Five leg stand
Auto Flash Infrared panel for automatic presses The press's flood bars

Without a built-in dial, you control heat by raising or lowering the heater, or with BBC's in-line heat control.

Options: the Flash-Amatic swings the heater off the platen after a timed dwell, and platen guards protect the platen.

Where to put it

  • Indoors, in a well-ventilated, non-residential work area, with at least 18 in of clear floor around it.
  • Never near gasoline, paint, solvents or other flammable vapors. The heater has hot and sparking parts inside.
  • Nothing combustible within 3 ft of the heater face while it is on or cooling.
  • A grounded outlet that matches the plug on your model, on a correctly rated circuit. Some models need their own branch circuit. No extension cords, and never modify the cord or plug.

BBC's warranty runs 18 months from shipment or 12 months from first use, whichever ends first. It requires installation and use per BBC's instructions.