Support
Machine type
Brand
eufyMake E1 UV Printer

eufyMake E1 UV Printer support

Covers: eufyMake UV Printer E1

Everything for keeping a eufyMake E1 printing: first setup and binding, the eufyMake (Anker Make) Studio software, the automatic cleaning and moisturizing system, monthly cleaning and consumable replacement, and fixes for missing colors, faded white and curing problems. The single most important rule: leave the E1 plugged in and on, and only shut it down with the 5 second power button hold.

eufyMake E1 UV printer, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Manuals & downloads

eufyMake's video: E1 unboxing and installation

More videos

eufyMake: E1 setup and beginner's guide
eufyMake: the main E1 printing workflow
eufyMake: E1 routine maintenance
eufyMake: ink cartridge and cleaning cartridge replacement

Embedded from the manufacturer's official channel.

About the eufyMake E1 UV Printer

The eufyMake E1 is a desktop UV printer that prints flat items, cylinders and textured, raised designs. It uses six proprietary ink cartridges (black, cyan, magenta, yellow, white and a varnish or gloss cartridge) plus a separate cleaning cartridge that holds cleaning fluid, moisturizing fluid and the waste ink. White comes in two types: hard white for rigid items and soft white for flexible materials like canvas. The printer is controlled from the eufyMake app or eufyMake Studio on a computer. From version 5.0 the software is called Anker Make, but it works the same way.

  • Size and weight: 595 x 242 x 395 mm, about 15 kg on its own and up to 25 kg with ink and accessories.
  • Print area: 330 x 420 mm on the standard flatbed, 330 x 90 mm on the mini flatbed. Keep the height difference across an item within 2 mm.
  • Add-ons: rotary attachment for cups, roll-to-film attachment and the UV DTF laminator.

Maintenance at a glance

When What to do
Always Leave the printer plugged in and on. It cleans and moisturizes the print head on its own.
Before important jobs Run Test Printing from the Print Head Maintenance panel.
Monthly Clean the UV lamp, around the print head, the flatbed and the print head station.
Every 3 months Deep clean, including the camera cover, and oil the guide rods.
About 6 months Replace the air filter, ink pad and scraper. Check the foam pads.
When prompted Replace the cleaning cartridge and empty ink cartridges.

Where to put it

eufyMake rates the E1 for 59 to 95°F (15 to 35°C) and 20 to 85% humidity. Set it on a flat, solid surface tilted less than 10 degrees, with at least 16 inches clear in front and behind, 12 inches on the right for the cartridges, and a gap from the wall on both sides. Keep it away from pets and children. UV printing gives off fumes, so eufyMake recommends a room of at least 15 square meters with fresh air coming in, no more than 8 hours of printing a day, and an exhaust fan or purifier in smaller rooms.