Support
Machine type
Brand
Epson SureColor F2100

Epson SureColor F2100 support

Covers: F2100 · F2000

Everything for keeping an Epson SureColor F2100 (and the older F2000) printing: the daily white-ink routine, weekly cap cleaning, fixes for clogs and weak white, and Epson's manuals. Epson has replaced the F2100 with the F2270, which is a different machine with its own ink and maintenance.

Epson SureColor F2100 direct-to-garment printer, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Techniques & settings

Warranty & service plans

Manuals & downloads

Epson's video: cleaning the F2100 suction cap

More videos

Epson: cleaning around the F2100 print head
Epson: replacing the F2100 head cleaning set
Epson: cleaning the scale and replacing the air filter
Epson: loading a T-shirt on the grip pad platen

Embedded from the manufacturer's official channel.

About the Epson SureColor F2100

The SureColor F2100 is Epson's 5-color direct-to-garment printer (cyan, magenta, yellow, black and two white cartridges). It prints in White Ink Mode for dark garments, or in Color Ink Mode using CMYK only. The F2000 is its predecessor and shares many of the same supplies, including the maintenance kit, head cleaning kit, cleaning cartridges, waste bottle, air filter and 600 ml inks.

Epson's maintenance schedule at a glance

How often What to do Time
Every working day Shake the white cartridges, print a nozzle check, clean the white channels if needed About 5 min
Every week Clean the suction cap (Maintenance > Head Cap Cleaning). If the printer sits idle, still print a nozzle check once a week. 5 to 10 min
Every month Shake the color cartridges. Check for firmware and Garment Creator updates. About 5 min
When prompted Replace the head cleaning set, clean around the print head, clean the scale and replace the air filter, empty the waste bottle and reset the counter, wash the ink tubes 5 to 10 min each
Idle a month or more Put the printer into Storage Mode with cleaning cartridges About 45 min

Where to put it

Epson rates the F2100 for 50 to 95°F and 20 to 80% humidity. Keep it away from heaters and air-conditioning vents, which dry the head and cause clogs, and don't run it on the same circuit as a heat press. Turn it off at the end of each day so it can run its shutdown maintenance.