Support
Machine type
Brand
DTF Station Aries 213 and Aries 113 UV DTF printers

What to send when you contact support: photos, video, nozzle check, error code and serial number

✓ Reviewed by Jason KimUpdated 2 min readFits: All printers, shakers, ovens, presses, lasers and cutters
Short answer

Send your order number, the machine model and serial number, a clear photo or short video of the problem, a photo of a fresh nozzle check if it's a printer, the exact error message, and the software and version you print from. Add what you've already tried and which ink, film or powder you use. With that in one message, we can start diagnosing right away instead of asking questions.

The checklist

Send this Why it helps Where to find it
Order number We look up your machine, warranty and any service plan Your order confirmation email
Model and serial number (a photo of the label is best) Epson and DTF Station both ask for the serial number to verify warranty The serial label on the machine
Photo or short video of the problem Shows us what you see and hear Your phone
Nozzle check photo (printers) Tells a clogged or missing channel apart from a settings or file problem Your printer's maintenance menu or control software
Exact error message or code Codes point straight to a cause A photo of the screen or software window
Software name and version Many problems are version or setting specific Usually under Help > About in your RIP
Supplies you use Ink, film, powder and cleaning solution brands can explain a problem, and affect warranty The labels
What you've already tried So we don't repeat steps A short list is fine

For a warranty claim, also have your proof of purchase handy. For an Epson printer, Epson asks for the serial number, the original purchase date, the address where the printer is and a description of the problem. The printer's control panel or a status sheet shows its carriage passes or printed sheets, which count toward Epson's warranty limits.

How to shoot a useful video

  1. Start wide, then go close

    Show the whole machine for a second so we know what we're looking at, then move in on the problem area.

  2. Catch the moment it happens

    Record the print, the error or the noise as it happens, with sound on. A grinding or clicking noise tells us a lot.

  3. Show the screen

    If there's a message on the control panel or in the software, hold on it long enough to read.

  4. Keep it short

    One short clip of the problem beats a long one. Send a second clip if you need to show something else.

Nozzle check photos that we can read

  • Lay the print flat in good light and get the whole pattern in the frame, in focus.
  • Take one nozzle check before a print job and another after it if the problem shows up partway through. That pair shows whether a channel is dropping out while printing.
  • Send a photo of the actual print too, and the file you were printing if the problem only shows on certain designs.

For DTF printers

Tell us which cleaning solution you use on the caps, wiper and print head. Household cleaners can damage these parts. If we ask for it, a short video of a head cleaning or of the head parking on the capping station helps us check alignment.

Where to send it

Text everything to (562) 609-4996, or attach it to the form on our warranty and support page.

Common questions

Where do I find the serial number?

On the label on the machine, and usually on your paperwork. If you can't find it, send your order number and we'll look it up.

My video is too big to text. What now?

Text us anyway and tell us. We'll send you another way to share it.

Why do you ask which ink and film I use?

Some problems come from the supplies, and manufacturers' warranties can exclude damage from unapproved ink, film, powder or parts. Knowing what's in the machine helps us give you the right fix and protect your coverage.

Do I need to send all of this for a simple question?

No. For a quick how-to question, just ask. The full list matters when something is broken, printing wrong or might be a warranty claim.

Did this fix it?