Support
Machine type
Brand
Epson SureColor G6070 DTF printer

Epson SureColor G6070 DTF printer support

Covers: G6070

Everything for keeping an Epson SureColor G6070 DTF printer running: setup and RIP software, Epson's daily and weekly routine, clogged nozzles and white ink, loading film, the shaker workflow, error messages, consumables and storage. The G6070 prints on DTF film rolls up to 35.4 inches wide with Epson UltraChrome DF ink, and needs a separate powder shaker and dryer to finish transfers.

Epson SureColor G6070 35 inch DTF roll printer on its stand, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Techniques & settings

Manuals & downloads

Epson's video: unboxing and setting up the G6070

More videos

Epson: how to perform an auto cleaning
Epson: how to clean the suction cap
Epson: how to load a roll of film
Epson: how to shake ink packs

Embedded from the manufacturer's official channel.

About the Epson SureColor G6070 DTF printer

The SureColor G6070 is Epson's roll-fed direct-to-film printer. It prints on film rolls from 10 to 35.4 inches wide, on 2 or 3 inch cores, up to 5.9 inches across and 22 lb. It uses Epson UltraChrome DF pigment ink in 1.6 liter packs: black, cyan, magenta, yellow and white, plus a Maintenance Liquid pack. The print head has 3,200 nozzles, and the printer checks its own nozzles while it prints. It has a built-in auto cutter and a 2 liter waste ink bottle, and it comes with a stand.

There is no printer driver. You print through a RIP: Epson includes Epson Edge Print PRO (Windows only) and Fiery Digital Factory Epson Production Edition. The printer has no curing unit, so it runs into a powder shaker and dryer, or you powder and cure in an oven. Epson's warranty covers one year or 5,150,000 carriage passes, whichever comes first, and does not cover damage from non-Epson ink.

Epson's maintenance schedule at a glance

When What to do
Every working day Take out and shake the White ink pack (the printer asks every 24 hours), print a nozzle check, wipe the platen
Every 3 weeks Take out and shake the color ink packs when the printer asks
Monthly Check Epson's support page for firmware and software updates
When prompted Clean the suction cap, replace the waste ink bottle, the head cleaning set or an ink pack
Off 2 weeks or more Run Keeping Preparation with five Cleaning Ink Supply Units

Where to put it

The G6070 weighs 285 lb without ink, so it needs a flat, solid floor. Epson recommends 68 to 77°F and 40 to 60% humidity (it runs from 50 to 95°F and 20 to 80%), at 6,562 feet or lower. Keep it out of direct sun and away from heaters, air-conditioning drafts and dusty work like fabric cutting. Plug it straight into a grounded outlet, never a power strip. If you run a shaker, leave room on the printer's left side so you can change ink packs mid-run. Epson recommends leaving it switched on: it runs maintenance every time it powers up, so frequent on and off cycles use more ink.