Support
Machine type
Brand
Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)

Epson SureColor P-Series photo printers (P700, P900, P6570, P8570) support

Covers: P700 · P900 · P6570 · P8570

The SureColor P700 and P900 are Epson's 13 and 17 inch desktop photo printers with ten UltraChrome PRO10 inks. The P6570 and P8570 are 24 and 44 inch roll printers with UltraChrome PRO6 ink. Most owner questions are about loading fine art and roll paper, clearing clogged nozzles and banding, and connecting the printer to a computer.

Epson SureColor P900 17-inch photo printer, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Manuals & downloads

Epson's video: unpacking the SureColor P700/P900 and installing the ink

More videos

Epson: P6570, P8570 and T-Series unboxing and initializing the printer
Epson: P6570, P8570 and T-Series loading and removing paper
Epson: P6570, P8570 and T-Series maintenance box, cutter and print head cleaning
Epson: P700/P900 changing Windows driver settings

Embedded from the manufacturer's official channel.

About the Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)

Epson's SureColor P-Series are pigment-ink photo and fine art printers. AA supports two families:

  • SureColor P700 (13 inch) and P900 (17 inch): desktop printers with ten UltraChrome PRO10 cartridges, including Violet, Gray, Light Gray, and both Photo Black and Matte Black installed at the same time. Paper goes in the rear paper feeder, the front paper feeder (one sheet of fine art paper or poster board) or on a roll. The P700 takes roll paper as standard. The P900 needs Epson's optional roll media adapter (C12C935221). The P700 uses 25 ml cartridges and the P900 uses 50 ml cartridges.
  • SureColor P6570 (24 inch) and P8570 (44 inch): large-format roll printers with UltraChrome PRO6 ink with Gray. They switch between Photo Black and Matte Black automatically by media type. The D models are dual roll. The P8570DL runs on ink packs instead of cartridges. They share their manual, maintenance box, cutter and cleaning stick with the SureColor T3770, T5770 and T7770.

Maintenance at a glance (P700 and P900)

When What to do
Faint or banded prints Print a nozzle check (Maintenance > Print Head Nozzle Check) and clean only if there are gaps
Every 6 months Remove and gently shake the ink cartridges, as Epson recommends
Within a year of opening Use up each ink cartridge for best results
Ink on back of prints Run Maintenance > Paper Guide Cleaning
Several times a year Turn it off and unplug it, then wipe the outer case with a soft cloth dampened with mild detergent. Dust the front cover with a feather duster
When prompted Replace the maintenance box (C12C935711). A spare comes in the box with a new printer

Where to put it

Epson rates the P700 and P900 for 50 to 95 °F and 20 to 80% humidity, non-condensing. The P6570 and P8570 have the same operating range, but Epson recommends 59 to 77 °F and 40 to 60% humidity, below 6,561 ft of altitude. Keep any of them out of direct sunlight and away from heaters, vents and rapid temperature changes, on a flat surface that supports the whole base. The P700 weighs about 30 lb and the P900 about 35 lb.