Machine type
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
Epson SureColor G6070 DTF printer
Mimaki TxF300-1600
Mimaki TxF330-800
STS XPD-924D DTF Printer (Mutoh)
STS VJ-628D DTF Printer (Mutoh)
DTF Station Vega S17
STS XpertJet 1682D (XPJ-1682D) 64 inch DTF Printer
STS XPD-724 DTF Printer (Mutoh)
Hotronix Fusion IQ, Air Fusion IQ and Dual Air Fusion IQ
Geo Knight DK20S and DK20SP Digital Knight Swing-Away Presses
DTF Station Maxima and Proxima Dual Heat Presses
Hotronix Auto Open Clam and Hover Heat Press
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
Insta 718, 728 and 828 Automatic Swing-Away Heat Presses
DTF Station Prisma Sentry Heat Press
Geo Knight DC16 and DC16AP Digital Combo Swing-Away Presses
Geo Knight DK Digital Clamshell Presses: DK20, DK16, DKA Auto, DK8 Label and DK7 Cap
Hotronix Auto Open Cap Press and 360 IQ Hat Press
Hotronix Craft Heat Press 9 x 12
Hotronix Mighty Mug Heat Press
Insta 256 and 288 Manual Swing-Away Heat Presses
Insta 907 Dual Station Shuttle Label Heat Press
Viper MAXX pretreatment machine
Ecofreen Mister-T2 and Mister-T2 Pro pretreatment machines
Pearl Elite and Pearl PTM DTG pretreatment machines
Viper XPT-1000 pretreatment machine
Lawson Silver-Jet and Silver-Jet V2 DTG Pretreat Sprayers
Lawson Zoom-AE DTG pretreatment machine
Viper MINI handheld DTG pretreatment machine
Brand
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
DTF Station Aries 124 UV DTF printer
Miro DTF Powder Shakers: Miro 13 Max, 16, 24 and 36
DTF Station Aries 213 and Aries 113 UV DTF printers
Seismo L16R and L24R DTF Powder Shaker and Dryer
Phoenix Air 16x20 DTF Curing Oven
DTF Station Maxima and Proxima Dual Heat Presses
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
DTF Station Vega S17
DTF Station Prisma Sentry Heat Press
DTF Station Seismo V36R DTF Powder Shaker and Dryer
DTF Station Arc 127 automatic cutter for DTF and UV DTF film
Epson SureColor F2100
Epson SureColor G6070 DTF printer
Epson SureColor F2270
Epson SureColor F3070
Epson SureColor F570
Epson SureColor F170
Epson SureColor F6470 and F6470H
Epson SureColor F6370
Epson SureColor F7200
Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)
Epson SureColor T-Series CAD and technical printers
Epson SureColor S-Series (S40600, S60600, S80600)
Prestige X6 support
The Prestige X6 is DTF Station's widest and fastest roll-to-roll DTF printer: six Epson i3200 heads, a 35.43 in (90 cm) print width and a 9-color ink set. It needs a larger room than the XL series, a stable temperature and humidity even when it isn't running, and six people or a forklift to install. It pairs with the Seismo V36R shaker.

Setup & first print
- NeoStampa for Prestige printers: install, activate the USB dongle, and add your printerNeoStampa for DTF Station printers is licensed by a USB dongle, not a code: the dongle is your license, and...
- NeoStampa printer schemes (ICC profiles): import print modes, fix "printing mode not supported", set film width and check ink orderDownload your printer's schemes from the NeoStampa folder in your Quick Start Guide, extract them and keep the folders. In...
- Prestige X6 installation: site requirements, stand assembly and transport locksThe X6 must be unloaded and installed by trained people: six or more to lift it, or a forklift using...
- Seismo V36R setup and settings: alignment, modes, temperatures and powder returnKeep about 200 to 300 mm (8 to 12 in) between the printer and the V36R, with the film centered...
Daily & weekly maintenance
- DTF powder clumping: how to store hot-melt powder and how long it lastsHot-melt powder clumps when it picks up moisture or heat. Store it in a sealed, lidded container with desiccant, around...
- Seismo V36R maintenance: daily powder cleaning, oil drainage and filter changesAt the end of each day, power off, clean powder out of the chamber, paddle, powder box and seal, tension...
- Shipping or moving a printer for service: how to pack it safely (Epson and DTF Station)Don't ship a printer until we or the manufacturer tell you where it's going and how. When you do, keep...
Troubleshooting
- Does my Prestige need a new print head? How to tell, how it's confirmed, and what to send usMost poor nozzle checks come from the capping station, wiper, dampers, ink lines or a dried head, not a failed...
- DTF film won't release or is hard to peel: causes and fixesFilm that fights you on the peel is usually overcured powder or a press that's too hot, and sometimes a...
- DTF powder sticking to bare film, uneven powder or white haze: fixesPowder that sticks to the clear parts of the film is almost always moisture or static: damp film, damp or...
- DTF transfers peeling, cracking or fading after washing: causes and fixesA DTF print that peels or washes off was almost always undercured or underpressed: the powder never fully melted, or...
- What to send when you contact support: photos, video, nozzle check, error code and serial numberSend your order number, the machine model and serial number, a clear photo or short video of the problem, a...
Software & drivers
- Artwork for DTF transfers: resolution, transparent backgrounds, color mode and fine detailBuild DTF artwork at the size you'll print, at 300 DPI, on a transparent background, and save it as a...
- Moving NeoStampa and Pilot to a new computer (Prestige printers)Before you switch, export both firmware backup files from Pilot, photograph your Pilot settings and calibration values, and save your...
- NeoStampa basics for Prestige printers: new job, resize, nest and printClick New Job, pick your printer and scheme, and add your files. Resize or rotate anything that sits in the...
- NeoStampa color matching: replace a color, print color charts, use spot colors and knock out backgroundsClick Color Replacement, pick the color that prints wrong and enter new values; the rule swaps that exact input color...
- NeoStampa for Prestige printers: install, activate the USB dongle, and add your printerNeoStampa for DTF Station printers is licensed by a USB dongle, not a code: the dongle is your license, and...
- NeoStampa hot folders: print automatically by dropping files in a folder (Prestige printers)In NeoStampa, open Hot Folder Configuration and click New Hot Folder. Pick a folder, turn on Move Printed Files to...
- NeoStampa job cost: set ink and film prices in Control Center and see what each print costsOpen Control Center. Set your currency and units under Preferences, check both Services are running, and confirm the Data Source...
- NeoStampa printer schemes (ICC profiles): import print modes, fix "printing mode not supported", set film width and check ink orderDownload your printer's schemes from the NeoStampa folder in your Quick Start Guide, extract them and keep the folders. In...
- NeoStampa white ink settings: white amount, choke for halos and gaps, fine text, transparency and halftoneChange the white amount with White Effect Layer > Flat > Intensity for one image, or in the profile's white...
- Which RIP software does my printer use? NeoStampa, DigiRIP, Pilot, Garment Creator, Edge Print and KothariA RIP turns your artwork into the ink layers the printer lays down, including the white underbase. Current DTF Station...
Techniques & settings
- Artwork for DTF transfers: resolution, transparent backgrounds, color mode and fine detailBuild DTF artwork at the size you'll print, at 300 DPI, on a transparent background, and save it as a...
- DTF film won't release or is hard to peel: causes and fixesFilm that fights you on the peel is usually overcured powder or a press that's too hot, and sometimes a...
- DTF heat press settings: temperature, time, pressure and when to peelFor Color Prime Glide Pro (formerly Quick Glide), press at 130 to 140°C (266 to 284°F) for 10 to 15...
- DTF powder clumping: how to store hot-melt powder and how long it lastsHot-melt powder clumps when it picks up moisture or heat. Store it in a sealed, lidded container with desiccant, around...
- DTF powder curing temperature and time: shaker and oven settingsColor Prime powder and Glide Pro film are specified at 125°C (257°F) for 60 seconds, and DTF Station treats 120°C...
- DTF powder sticking to bare film, uneven powder or white haze: fixesPowder that sticks to the clear parts of the film is almost always moisture or static: damp film, damp or...
- DTF transfers peeling, cracking or fading after washing: causes and fixesA DTF print that peels or washes off was almost always undercured or underpressed: the powder never fully melted, or...
- How long DTF transfers last before pressing and how to store themCured DTF transfers keep up to about 6 months when stored dry, away from heat and sunlight, with desiccant. Printed...
- NeoStampa basics for Prestige printers: new job, resize, nest and printClick New Job, pick your printer and scheme, and add your files. Resize or rotate anything that sits in the...
- NeoStampa color matching: replace a color, print color charts, use spot colors and knock out backgroundsClick Color Replacement, pick the color that prints wrong and enter new values; the rule swaps that exact input color...
- NeoStampa hot folders: print automatically by dropping files in a folder (Prestige printers)In NeoStampa, open Hot Folder Configuration and click New Hot Folder. Pick a folder, turn on Move Printed Files to...
- NeoStampa white ink settings: white amount, choke for halos and gaps, fine text, transparency and halftoneChange the white amount with White Effect Layer > Flat > Intensity for one image, or in the profile's white...
- Seismo V36R setup and settings: alignment, modes, temperatures and powder returnKeep about 200 to 300 mm (8 to 12 in) between the printer and the V36R, with the film centered...
Warranty & service plans
- Does my Prestige need a new print head? How to tell, how it's confirmed, and what to send usMost poor nozzle checks come from the capping station, wiper, dampers, ink lines or a dried head, not a failed...
- Shipping or moving a printer for service: how to pack it safely (Epson and DTF Station)Don't ship a printer until we or the manufacturer tell you where it's going and how. When you do, keep...
- What to send when you contact support: photos, video, nozzle check, error code and serial numberSend your order number, the machine model and serial number, a clear photo or short video of the problem, a...
Watch DTF Station's video: Prestige X6 launch overview
Embedded from the manufacturer's official channel.
About the Prestige X6
The X6 is a 36-inch class roll-to-roll DTF printer for high-volume shops. It runs DTF Station Pilot as the printer driver and neoStampa as the RIP.
| Spec | Prestige X6 |
|---|---|
| Print heads | 6 Epson i3200 |
| Max print width | 35.43 in (90 cm) |
| Inks | CMYK + white + Lc, Lm, G, O (9 colors) |
| Power (US) | 1500W, 110V, 13.6A |
| Machine size | 100 in W x 48 in D x 63 in H |
| Weight | 630 lbs |
| Built-in systems | White ink circulation, auto cleaning, auto capping, head strike sensor, film and take-up sensors, electric pinch roller lever |
The matching shaker is the Seismo V36R, which needs its own 220V circuit (9000W, 40.9A). Plan that with an electrician before delivery.
Where to put it
Indoors, on a level, stable floor with no vibration, in a ventilated room away from flammable materials. Keep it out of direct sunlight and away from air conditioning, heaters, moisture, dust and strong airflow. DTF Station specifies 68 to 83°F and 40 to 60% humidity while printing, and 59 to 86°F and 30 to 80% humidity while idle, with no condensation. Keep within those limits even when the printer is off. Allow about 3.5 x 2.2 m for the machine and about 4.5 x 3.2 m to work around it.
X6 maintenance guides are on the way. Until they're published, text us at (562) 609-4996 before doing any maintenance inside the printer.











































































