Support
Machine type
Brand
DTF Station Prestige R1

NeoStampa hot folders: print automatically by dropping files in a folder (Prestige printers)

✓ Reviewed by Jason KimUpdated 2 min readFits: NeoStampa (DTF Station Edition) · Prestige R1 · R2 Pro · R2 upgraded to NeoStampa · L2 · XL2 · XL2 Pro · XL3 · XL4 · X6
Short answer

In NeoStampa, open Hot Folder Configuration and click New Hot Folder. Pick a folder, turn on Move Printed Files to a separate done folder, choose the printer and print scheme, set how many files trigger a job and your nesting options, enable it and set the scan interval. From then on, any design you copy into that folder is processed and printed automatically.

A hot folder is a normal Windows folder that NeoStampa watches. When a file lands in it, NeoStampa applies the printer, scheme and layout you chose and prints it. It suits repeat orders and high-volume work where every job uses the same settings.

Set up a hot folder

  1. Open the hot folder settings

    Open NeoStampa and click to open Hot Folder Configuration.

  2. Create the folder

    Click New Hot Folder. Set the Path: choose a location, create a new folder, give it a clear name (for example the film width and scheme), and click OK.

  3. Decide what happens to printed files

    Turn on Move Printed Files and point it at a separate folder for finished jobs. Avoid Delete Files, which removes your originals after printing.

  4. Choose printer and scheme

    Select the printer this folder feeds and the print scheme it should use.

  5. Set the trigger

    Choose when a job starts, for example the number of files that must be in the folder before processing begins.

  6. Set the page options

    Choose layout and nesting options so designs are packed tightly and you don't waste film.

  7. Turn it on

    Enable the hot folder and set the Interval Time, which is how often NeoStampa checks the folder. Click OK and close the window.

Print with it

  1. One design

    Copy your design file and paste it into the hot folder. NeoStampa processes and prints it, then moves the file into your printed files folder.

  2. Several designs in one job

    Reopen the hot folder settings, double-click your hot folder and change Number of Files per Job, then click OK. Paste that many designs into the folder at once and they print as a single nested job.

  3. Check the layout

    Right-click the processed job and choose Reopen Job to see how the designs were nested.

Good habits

  • Print a nozzle check before you start feeding the folder. A hot folder prints whatever the head condition is.
  • Use art that already has the right size and resolution. The hot folder won't stop to ask.
  • Disable the hot folder when you're not running production, so a stray file can't start a print.

Hot folder not printing?

What you see Check
Files sit in the folder and nothing happens The hot folder is enabled, and you've waited one full interval
Some files print, others wait Number of Files per Job: the job only starts when that many files are in the folder
Jobs process but never reach the printer Pilot is open and its connection light is green
Wrong quality or size The printer and scheme set on that hot folder

Hot folder not picking files up? Text us a photo or short video at (562) 609-4996 with a screenshot of its settings.

Watch DTF Station's video: how to set up a hot folder in NeoStampa

Embedded from the manufacturer's official channel.

Common questions

Should I use Delete Files or Move Printed Files?

Move Printed Files. Delete removes your originals after printing. Moving them to a done folder keeps them for reprints and shows you what has printed.

Can a hot folder print several designs as one nested job?

Yes. Raise Number of Files per Job and paste several designs at once. NeoStampa nests them into one job.

My printer started printing a job I didn't send. Why?

Check your hot folders. Anything that lands in an active hot folder prints, including files saved there by mistake.

Can I have different hot folders for different film or quality?

Yes. Each hot folder has its own printer and scheme, so you can make one per print mode and name them clearly.

Sources
Did this fix it?