Support
Machine type
Brand
DTF Station Prestige A3+ and A3+ R

DigiRip activation: moving to a new computer, lost codes and expired trials

✓ Reviewed by Jason KimUpdated 2 min readFits: DigiRip v10, v11, v12 (CADlink Digital Factory)
Short answer

A DigiRip license runs on one computer at a time. To move it, deactivate it on the old computer first (Help > Deactivate Product), then install DigiRip on the new one and enter the same code with the same registration name and email. If the old computer died before you could deactivate it, the license can be reset through Fiery, the company behind DigiRip's engine. Lost your code? Text us your order number and we'll look it up.

Match your problem

What you're seeing What it means Go to
New computer, crashed computer, or a reformatted hard drive The license is still tied to the old machine Move your license
"Code already used" or "activated on another computer" Same thing: the code is still assigned elsewhere Move your license
You can't find your activation code It was emailed at purchase Find your code
Trial days are counting down, or the trial ended DigiRip was never registered with a full code Trial expired
"Unable to activate" right after a Windows update Known issue in older versions Update DigiRip

Move your license to a new computer

  1. Deactivate on the old computer

    If the old computer still works, open DigiRip and choose Help > Deactivate Product. This frees your code right away.

    Reformatting Windows or replacing the hard drive counts as a new computer. Deactivate before you wipe anything.

  2. Install DigiRip on the new computer

    Use the installer link from your purchase email. The new computer needs Windows 10 or 11. Run Windows Update before and after you install.

  3. Enter the same code and the same registration details

    When DigiRip opens, enter your activation code (it starts with a P). Use exactly the same name and email you registered with the first time. A different email is the most common reason a valid code gets rejected.

  4. Reusing a computer that had DigiRip before?

    If you're asked, choose Activate with your current license.

If the old computer died or won't start

You can't deactivate a computer that won't turn on, so the license has to be reset:

  1. Try the self-reset first

    Enter your code on the new computer. If your license qualifies, DigiRip offers a self-reset and Fiery emails a PIN to your registration email. Enter it within 10 minutes, then close DigiRip completely and reopen it.

  2. Otherwise, ask Fiery to reset it

    Go to fiery.com and open the support chat. Choose Licensing issue > Fiery Specialty Products > Digital Factory > Reset a license > Computer replaced, and have your activation code ready. Fiery confirms by email.

    On version 10, Fiery may charge for a reset or suggest an upgrade. Text us first and we'll tell you the best route for your setup.

Find a lost activation code

  • Search your email for "DigiRip" or "Digital Factory". The code arrives with the download link after purchase.
  • If DigiRip is still installed somewhere, open Help > About > More to see the license number.
  • Still nothing? Text us your order number or printer serial number and we'll look it up.

Trial expired, or stuck on the trial

DigiRip offers a 15-day trial, and the days left show in the top right corner. To keep printing, buy a license, then enter your code under Help > Register. You normally don't need to reinstall.

If your printer came with a DigiRip license and you still see trial days, the code just wasn't entered on first launch. Open Help > Register and enter it now.

"Unable to activate" after a Windows update

Older versions of DigiRip can lose their activation when Windows updates. Version 11.3 fixed this. Install the latest version 11 installer, then run the updater in the C:\DigiRIP folder. If you're on version 10, you'll need to move to version 11 first. Text us and we'll help you check which version you have.

Before you contact us

Have these ready and we can sort it out in one go:

  • Your activation code (starts with P)
  • Your order number
  • The name and email you registered DigiRip with
  • Your printer model and DigiRip version (Help > About)

Watch DTF Station's video: requesting a DigiRip activation code reset on the Fiery Community

More videos

Finding your DigiRip version and installed activation code
Fixing "Unable to activate product code" in DigiRip and Digital Factory
Releasing and moving software seats with CADlink activation codes

Embedded from the manufacturer's official channel.

Common questions

Can I run DigiRip on a Mac?

No. DigiRip runs on Windows 10 or 11. If you work on a Mac, use a Windows PC for printing.

Can I install one license on two computers?

One license is active on one computer at a time. A second computer needs a second license. One computer can run more than one printer.

Is DigiRip the same as CADlink Digital Factory?

Yes. DigiRip is DTF Station's edition of Digital Factory, which is now made by Fiery (Fiery bought CADlink in 2022). Fiery handles license resets.

Can antivirus or a firewall cause activation errors?

Yes. Security software can block the activation from reaching the license server. Allow DigiRip through it, then try again.

My printer came with NeoStampa, not DigiRip. Does this apply?

No. Newer Prestige printers ship with NeoStampa, which is licensed with a USB dongle instead of a code. Text us and we'll point you to the right steps.

Sources
Did this fix it?