Support
Machine type
Brand
Epson SureColor F6370

Epson SureColor F6370 support

Covers: F6370 Standard Edition · F6370 Production Edition

The SureColor F6370 is Epson's 44 inch dye-sublimation roll printer. It refills from 1.1 liter UltraChrome DS ink packs with a chip unit for each color, drains into a waste ink bottle, and is driven by Epson Edge Print or another RIP over the Epson communication driver. Stir the high density black ink and clean the anti-drying caps once a week.

Epson SureColor F6370 44 inch dye-sublimation printer, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Error messages

Software & drivers

Techniques & settings

Warranty & service plans

Manuals & downloads

Epson's video: cleaning the F6370 caps

More videos

Epson: replacing the F6370 wipers and wiper cleaners
Epson: using Epson Edge Print

Embedded from the manufacturer's official channel.

About the Epson SureColor F6370

The F6370 prints on 44 inch roll transfer paper with cyan, magenta, yellow and high density black ink. You refill each ink tank from a 1.1 liter ink pack and swap in the chip unit that comes with it. Waste ink goes into a waste ink bottle, which must be installed whenever the printer is on, and even when it is off, because ink in the waste tube can still drain. Epson lists the Epson Communication Driver, LFP Remote Panel 2, Epson Edge Dashboard and Epson Edge Print as its software.

Epson's maintenance schedule at a glance

How often What to do
Before each job, or after time idle Print a nozzle check and clean the head only if there are faint or missing areas
Every week Stir the high density black ink in its tank and clean the anti-drying caps with the cap cleaning kit
Every month Clean the platen
When the screen asks Replace the waste ink bottle (part C13T724000)
When prints smudge after repeated cleanings Clean the anti-drying caps and replace the head cleaning set

Where to put it

Epson rates it for 59 to 95 °F and 20 to 80% humidity, and recommends 59 to 77 °F and 40 to 60% humidity for consistent color. Keep it away from heaters and air conditioning vents, which dry the nozzles, and keep the area free of dust and lint. If it sits unused with the power off, turn it on at least once every two weeks so it can clean the head automatically.