Support
Machine type
Brand
Epson SureColor F6370

Epson F6370 anti-drying cap cleaning and head cleaning set (wiper) replacement, step by step

✓ Reviewed by Jason KimUpdated 3 min readFits: F6370
Short answer

Clean the F6370's anti-drying caps once a week: choose Head Cap Cleaning, wipe around the caps with a narrow stick, fill each cap with cap cleaning liquid starting from the second cap from the left, then soak it out with two dry wide sticks. Never put liquid in the first cap on the left, which is the suction cap. If prints are faint or smudged after cleaning, replace the wiper and wiper cleaner.

When to do it

When Job
Once a week Clean the anti-drying caps with the cap cleaning kit (and stir the High Density Black ink in its tank)
Nozzle gaps keep coming back after several head cleanings, or prints are smudged Clean the anti-drying caps, then replace the head cleaning set (wiper and wiper cleaner)
Ink still smears onto prints after cleaning Run Head Maintenance with the head maintenance kit

Wear the gloves from the kit, eye protection and a mask. Take the paper out first, touch something metal to discharge static, and use only the sticks and cap cleaning liquid from the kit. Never use water or alcohol on the caps, wiper or nozzle surface, and never reuse a cleaning stick.

Cleaning the anti-drying caps

  1. Move the head out

    Select the maintenance tab, then Head Cap Cleaning and press OK. The head moves to the cleaning position. Follow the screen to open the maintenance cover.

  2. Wipe the outside of the caps

    Hold a narrow cleaning stick straight up and down and wipe ink off around the outsides of the caps. Don't touch the inside of the caps, or they may not seal on the head. Then wipe inside the guides.

  3. Fill the anti-drying caps with cleaning liquid

    Put the kit's cup on a tray and pour in about 5 ml (0.17 oz) of cap cleaning liquid, then recap the bottle. Using the dropper, fill each cap until it's full but not overflowing, starting with the second cap from the left.

  4. Soak it back up

    Use a new, dry wide stick to soak up the liquid from the caps, then another new dry wide stick to wipe up what's left. Liquid or ink left inside the caps can clog the nozzles.

  5. Close up

    Close the maintenance cover and press OK twice. Print a nozzle check.

Never put cleaning liquid in the first cap on the left. That's the suction cap, and liquid in it can make the printer malfunction. If some gets in, don't try to wipe it out: touching the inside of the suction cap can stop it capping properly. Text us instead.

Replacing the head cleaning set (wiper and wiper cleaner)

Epson says to replace it when prints are faint or smudged, or segments are still missing after cleaning the head. The wiper kit has two wipers and two wiper cleaners.

  1. Open the maintenance area

    From the maintenance tab choose Head Cap Cleaning and press OK so the head moves out of the way, then open the maintenance cover as the screen shows.

  2. Swap the wiper cleaner

    Grip the old wiper cleaner and lift it out. Set the new one on the attachment point and press down until it clicks.

  3. Swap the wiper

    Hold the old wiper at its attachment point, tilt it to the left and lift it out. Pull the cap off the wiping part of the new wiper, set it on the attachment point and press down until you hear a click.

  4. Close up

    Close the maintenance cover and press OK twice.

Head Maintenance for smearing

If ink still smears onto prints after head cleaning, remove the paper and choose Head Maintenance on the maintenance tab, then Yes. The head moves aside. Peel the backing off the two pads from the head maintenance kit, open the printer cover and stick them to the platen on each side of the head, pressing each edge against the rollers with no gap. Keep them off the ink absorbing areas, and rub gently so you don't bend the platen. Close the cover and press OK, and don't open the cover until the screen tells you to remove the pads. Throw them away, close the cover and press OK to clean the head.

Need a hand? Text us a photo of the caps at (562) 609-4996.

Watch Epson's video: cleaning the F6370 caps

Embedded from the manufacturer's official channel.

Common questions

How often should I clean the anti-drying caps?

At least once a week, Epson says, along with stirring the High Density Black ink.

I put cleaning liquid in the suction cap by mistake. What now?

Don't try to wipe it out. Epson says touching the inside of the suction cap can stop it capping properly. Contact us.

Can I use water or alcohol on the caps?

No. Epson says to use only the specified cap cleaning liquid. Water and alcohol can damage the caps, wiper and nozzle surface.

When does the wiper need replacing?

When prints are faint or smudged, or segments are still missing after you've cleaned the print head.

Ink keeps smearing on my transfers. What should I try?

Clean the anti-drying caps, replace the wiper set, and if it continues run Head Maintenance with the head maintenance kit.

Did this fix it?