Machine type
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
Epson SureColor G6070 DTF printer
Mimaki TxF300-1600
Mimaki TxF330-800
STS XPD-924D DTF Printer (Mutoh)
STS VJ-628D DTF Printer (Mutoh)
DTF Station Vega S17
STS XpertJet 1682D (XPJ-1682D) 64 inch DTF Printer
STS XPD-724 DTF Printer (Mutoh)
Hotronix Fusion IQ, Air Fusion IQ and Dual Air Fusion IQ
Geo Knight DK20S and DK20SP Digital Knight Swing-Away Presses
DTF Station Maxima and Proxima Dual Heat Presses
Hotronix Auto Open Clam and Hover Heat Press
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
Insta 718, 728 and 828 Automatic Swing-Away Heat Presses
DTF Station Prisma Sentry Heat Press
Geo Knight DC16 and DC16AP Digital Combo Swing-Away Presses
Geo Knight DK Digital Clamshell Presses: DK20, DK16, DKA Auto, DK8 Label and DK7 Cap
Hotronix Auto Open Cap Press and 360 IQ Hat Press
Hotronix Craft Heat Press 9 x 12
Hotronix Mighty Mug Heat Press
Insta 256 and 288 Manual Swing-Away Heat Presses
Insta 907 Dual Station Shuttle Label Heat Press
Viper MAXX pretreatment machine
Ecofreen Mister-T2 and Mister-T2 Pro pretreatment machines
Pearl Elite and Pearl PTM DTG pretreatment machines
Viper XPT-1000 pretreatment machine
Lawson Silver-Jet and Silver-Jet V2 DTG Pretreat Sprayers
Lawson Zoom-AE DTG pretreatment machine
Viper MINI handheld DTG pretreatment machine
Brand
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
DTF Station Aries 124 UV DTF printer
Miro DTF Powder Shakers: Miro 13 Max, 16, 24 and 36
DTF Station Aries 213 and Aries 113 UV DTF printers
Seismo L16R and L24R DTF Powder Shaker and Dryer
Phoenix Air 16x20 DTF Curing Oven
DTF Station Maxima and Proxima Dual Heat Presses
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
DTF Station Vega S17
DTF Station Prisma Sentry Heat Press
DTF Station Seismo V36R DTF Powder Shaker and Dryer
DTF Station Arc 127 automatic cutter for DTF and UV DTF film
Epson SureColor F2100
Epson SureColor G6070 DTF printer
Epson SureColor F2270
Epson SureColor F3070
Epson SureColor F570
Epson SureColor F170
Epson SureColor F6470 and F6470H
Epson SureColor F6370
Epson SureColor F7200
Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)
Epson SureColor T-Series CAD and technical printers
Epson SureColor S-Series (S40600, S60600, S80600)
Siser Romeo vinyl cutter support
Everything for the Siser Romeo: setting it up, adjusting the blade, choosing cut presets, running a test cut, and Siser's manual. Romeo is Siser's 24 inch cutter for heat transfer vinyl, adhesive vinyl, cardstock and similar materials, run from its touch screen or from Siser's Leonardo Design Studio software over USB or Wi-Fi.

Setup & first print
- Siser Romeo setup and first cut: blade depth, pinch rollers, presets and test cutUnpack Romeo, plug in the DC power and switch it on. Put a 45° blade in the housing pointed side...
- Siser Romeo: connecting by USB or Wi-Fi and sending jobs from Leonardo Design StudioRomeo takes jobs three ways: a USB cable from your computer into the USB-B port on the back, Wi-Fi, or...
Daily & weekly maintenance
Troubleshooting
Software & drivers
- Siser Romeo print and cut with Leonardo Design Studio: registration marks, camera alignment and cut contoursIn Leonardo Design Studio, check "Print and Cut job" on the art board, build a cut contour with registration marks,...
- Siser Romeo: connecting by USB or Wi-Fi and sending jobs from Leonardo Design StudioRomeo takes jobs three ways: a USB cable from your computer into the USB-B port on the back, Wi-Fi, or...
Techniques & settings
- Siser Romeo print and cut with Leonardo Design Studio: registration marks, camera alignment and cut contoursIn Leonardo Design Studio, check "Print and Cut job" on the art board, build a cut contour with registration marks,...
- Siser Romeo setup and first cut: blade depth, pinch rollers, presets and test cutUnpack Romeo, plug in the DC power and switch it on. Put a 45° blade in the housing pointed side...
Manuals & downloads
Watch Siser's video: Everything you need to know about the Romeo
More videos
Embedded from the manufacturer's official channel.
About the Siser Romeo vinyl cutter
Romeo is Siser's 24 inch desktop vinyl cutter. Adjustable pinch rollers feed the material in and out, and each pinch roller has a lever that raises or lowers its tension. A roller bar lever locks the material in place. The touch screen gives you the jog arrows, cut presets, test cut, Wi-Fi and USB settings, and a camera screen for setting the tool position. It connects to a computer by USB cable or Wi-Fi, and reads cut files from a USB flash drive.
What comes in the box
- Blade housing, 45° blades and a 60° blade
- Marker adapter
- 12 x 12 inch cutting mat
- Power cord and power supply, USB cord
- Two sheets of Siser heat transfer vinyl and a cover sheet
Care at a glance
| When | What to do |
|---|---|
| Every job | Run a test cut on the material you are about to use |
| When cleaning | Unplug first, then wipe with a soft, dry cloth. No solvents. |
| When changing blades | Unplug first. Remove a broken blade from the housing with tweezers, never your fingers. |
| Not in use | Disconnect the power, and keep blades out of reach of children |
Where to put it
Siser says to use and store Romeo indoors, dry, between 40°F and 95°F, on a level, stable surface with space in front and behind for the material to travel.











































































