Support
Machine type
Brand
Siser Romeo vinyl cutter

Siser Romeo: connecting by USB or Wi-Fi and sending jobs from Leonardo Design Studio

✓ Reviewed by Jason KimUpdated 2 min readFits: Siser Romeo 24"
Short answer

Romeo takes jobs three ways: a USB cable from your computer into the USB-B port on the back, Wi-Fi, or a USB flash drive in the USB-A port with no computer at all. Install Leonardo Design Studio, which is free with Romeo, from Siser's setup site. For Wi-Fi, tap Settings, then WiFi, then Scan, pick your network and enter the password. The Wi-Fi indicator on the home screen shows when Romeo is connected.

Three ways to send a job

Method What you need Port or screen
USB cable Computer with Leonardo, the supplied USB cord USB-B port on the back
Wi-Fi Computer with Leonardo on your wireless network Settings > WiFi
Flash drive A cut file on a USB flash drive, no computer USB-A port, Settings > USB

Step by step

  1. Register and get Leonardo

    Go to setup.siser.com to set up and register Romeo, and download Leonardo Design Studio. Leonardo is built for Romeo and Juliet: it has a design library of ready-made cut files and Siser's cut presets for its materials.

  2. Connect by USB

    With Romeo powered on, plug the square end of the supplied USB cord into the USB-B port on the back and the other end into your computer.

  3. Or connect by Wi-Fi

    On Romeo's touch screen, tap Settings, then WiFi. Tap Scan to search for networks, pick yours and type the password. Use the eye button to show the password and check for typos. If you need a fixed address, type it in the IP Address field and tap Apply. The Wi-Fi indicator in the corner of the home screen shows the connection status.

  4. Send the design from Leonardo

    Design or open your file in Leonardo, choose your cutting options (including whether you're cutting on a mat or matless), and send it to Romeo. Siser's video below walks through the send screen. On Romeo, the job progress circle fills as it cuts, and you can pause or cancel from the home screen.

  5. Or cut from a flash drive

    Plug the drive into the USB-A port on the back, tap Settings > USB, open the folder and pick your file. Move the blade to the start point with the on-screen arrows, then tap Start Cut.

Run a test cut on the material before every job, whichever way you send it. The test cut button is on the home screen.

If Romeo doesn't show up in Leonardo

  • Check the Wi-Fi indicator on Romeo's home screen. If it isn't connected, scan again and re-enter the password.
  • If Wi-Fi won't connect, use the USB cable to keep working while you sort out the network.
  • On USB, make sure the cord is in the USB-B port, not the USB-A flash drive port.
  • Wake the cutter. Romeo sleeps after the time set under Settings > General Settings > Sleep.
  • Note the versions on Settings > System Info. Don't press Default All Settings on that screen unless you mean to: it wipes your saved presets too.

Need a hand?

Text a photo of Romeo's WiFi screen and tell us your computer's operating system to (562) 609-4996.

Watch Siser's video: connecting Romeo to Wi-Fi

More videos

Sending a design with Leonardo Design Studio (Siser)
Leonardo Design Studio overview (Siser)
Mat and matless cutting with Leonardo Design Studio (Siser)

Embedded from the manufacturer's official channel.

Common questions

Is Leonardo Design Studio free?

Yes. The Basic version comes free with Romeo. Leonardo Pro is a paid subscription upgrade with extra design tools.

Which computers does Leonardo run on?

Siser lists Windows 8.1 and higher and macOS 10.15 and higher.

Leonardo looks wrong on my Mac.

Siser has noted a display problem on macOS Sonoma. Its suggested workaround is to change your display resolution; Siser recommends 2304 x 1440.

I plugged the cable in but nothing happens.

Check it is in the USB-B port. The USB-A port on the back is only for flash drives.

What does the Default button on the WiFi screen do?

It switches Romeo's Wi-Fi to hotspot mode. Don't press it while you're trying to join your normal network.

What file types can I cut from a flash drive?

Siser's manual points to its website for the accepted file types, so check siser.com or ask us before you prepare files.

Did this fix it?