Support
Machine type
Brand
Uninet iColor white toner transfer printers (560, 650, 800W and earlier models)

Uninet iColor white toner transfer printers (560, 650, 800W and earlier models) support

Covers: iColor 560 · 650 · 800W · 550 · 600 · 500

Uninet iColor printers are white toner laser printers that print transfers: you print onto iColor transfer paper, marry it to an adhesive sheet, and heat press it onto a garment or hard surface. Every job goes through Uninet's ProRIP software, which handles the white layer, paper settings and mirroring. Because they're toner printers, there's no daily ink maintenance: you replace toner, waste toner and wear parts when the printer asks.

Uninet iColor 560 white toner transfer printer, front view

Setup & first print

Daily & weekly maintenance

Troubleshooting

Software & drivers

Techniques & settings

Warranty & service plans

Manuals & downloads

Watch Uninet's video: installing iColor ProRIP

More videos

Uninet: the iColor 650 color plus white printer
Uninet: iColor white toner master class

Embedded from the manufacturer's official channel.

About the Uninet iColor white toner transfer printers (560, 650, 800W and earlier models)

The iColor line from Uninet are laser printers that can print white toner, so you can make transfers for dark garments, hard surfaces, labels and window clings. The current desktop model is the iColor 560 (letter, legal and A4, up to 14 inches long). The iColor 650 and iColor 800W are the larger-format models. The 500, 550 and 600 are earlier models that many shops still run.

What matters for upkeep

  • Software runs the printer. Uninet's ProRIP (or ProRIP Essentials on newer 560s) sets the paper type, toner order, white layer and mirroring. Uninet asks you not to change settings on the printer's own control panel unless their technician tells you to.
  • Cartridge order changes with the job. On the 560, white goes in the front slot for overprint (garment transfers) and in the back for underprint (clear or dark media). Black goes in the front for plain CMYK. Only one of black, white or clear can be installed at a time.
  • Genuine consumables. Uninet says incompatible toner, drums, transfer belts or fusers can damage the printer, and that damage isn't covered by the warranty.
  • Connection: the 560 connects by USB, Ethernet or Wi-Fi. Use one at a time, never USB and network together.

iColor 560 maintenance at a glance

When What to do
Replace Toner message Replace that print cartridge. Shake new cartridges side to side 5 or 6 times first.
Waste toner bottle message Replace the waste toner bottle. Bottles can't be reused.
Density Sensor Require Cleaning Clean the toner density sensor and the laser unit dust shields
White dots, or smears after a jam Clean the registration roller
Double feeds or misfeeds Clean the paper tray, friction pad and paper feed roller
White or colored outlines around graphics Run the color registration procedure

Where to put it

Uninet recommends 45 to 65% humidity and 50 to 75°F for the 560, and a dedicated circuit of at least 15 amps to avoid fusing problems. Keep transfer paper in the same conditions. Save the box and packing in case the printer ever needs to go back for service.