Support
Machine type
Brand
Uninet iColor white toner transfer printers (560, 650, 800W and earlier models)

iColor ProRIP and ProRIP Essentials: install, activate and set up your printer

✓ Reviewed by Jason KimUpdated 2 min readFits: iColor 560 · 650 · 800W · 550 · 600
Short answer

There are two versions. ProRIP Essentials, on newer iColor 560s, is downloaded and activated with the Activation Code on your laminated quick start guide plus your computer's System ID, through Uninet's validation page. The original ProRIP runs from a USB dongle that is also your license key, so it must stay plugged in. After installing either one, connect it to the printer and print a test page.

Which version do you have?

Version How it's licensed Usually shipped with
ProRIP Essentials Activation Code plus your computer's System ID, validated online. No dongle. Newer iColor 560s
ProRIP USB dongle. The dongle is the license and must stay plugged in. 650, 800W, earlier 560s, and ProRIP upgrades for older models

Before you start

  • Use a Windows computer with an internet connection.
  • Close other programs. Remove third-party antivirus, or add ProRIP to its safe list after installing. Windows Defender is fine.
  • Connect the printer by USB or network (not both) and turn it on.

ProRIP Essentials

  1. Download and run the installer

    Download ProRIP Essentials from Uninet's iColor support site and double-click the installer. Click Next, accept the license, select your printer model and keep the default folders.

  2. Pick your serial number and connection

    When asked, choose the serial number format that matches your printer so the right driver loads. The serial number is on the shipping box, on a label inside the top lid, or on the configuration page (Menu > Print List/Report > Configuration Page with the black cartridge installed). Then choose USB or Network. The installer finds the printer and installs its driver.

  3. Let it finish

    If Windows asks for .NET Framework 3.5, install it. Restart the computer if prompted.

  4. Validate

    Launch ProRIP Essentials and choose Validate (or Utilities > Software Validation if you're in demo mode). Copy the System ID shown. Go to Uninet's validation page, enter your Activation Code and the System ID, and click Get Validation Code. Paste that code back into the software and click Validate.

  5. Print a test

    Under Print Settings, choose your printer, the print mode for your paper and the media size, then send a test print.

ProRIP (dongle version)

  1. Install from the dongle

    Plug the dongle into a free USB port. Open the RIP setup folder on it, right-click the setup file and choose Run as administrator. Pick your language, click Next with the dongle inserted, choose 32-bit or 64-bit to match Windows, accept the license and choose the full install. Install .NET Framework if prompted. Uninet suggests copying the dongle's install files to your computer as a backup.

  2. First launch

    With the dongle in and the computer online, open ProRIP and set your units. The Queue Wizard starts: click Next, then Install Printer, and choose your iColor model.

  3. Set the port

    In Port Setup (or later under Queue > Manage Queues), choose TCP/IP for a network printer and select it from the list, or choose the USB port with your printer's name. You must do this or nothing will print. Give the printer a static IP so the port keeps working.

  4. Print a test page

    Choose Devices > Print Test Page.

Keep the dongle safe. It's the license, Uninet charges to replace it, and ProRIP won't run without it plugged in.

If a print shows 'Port Failed to Open' or sits on Holding, see our guide to an iColor printer that won't connect. For anything else, text us a screenshot at (562) 609-4996.

Watch Uninet's video: installing iColor ProRIP

Embedded from the manufacturer's official channel.

Common questions

Where is my ProRIP Essentials Activation Code?

On the upper right of the laminated quick start guide that ships with new printers. Codes are case sensitive.

I'm moving ProRIP Essentials to a new computer. Will it work?

Each Activation Code includes three validations. Uninet describes them as spares in case a computer fails, not three licenses: the code licenses one computer at a time. Reinstalling or upgrading on the same computer doesn't use up a validation. Contact us before you move it so we can help you through it.

I lost or broke my ProRIP dongle.

The dongle is the license. Uninet charges to replace it, and the physical USB drive has a 3-month warranty. Uninet suggests plugging it into an external USB hub rather than handling it often.

Install fails or ProRIP crashes. What should I check?

Close other programs and remove third-party antivirus, or add ProRIP to its safe list. Windows Defender is the only antivirus Uninet says doesn't conflict. Install .NET Framework if Windows asks for it, and restart before first launch.

Can I print without ProRIP?

Only plain CMYK jobs through the optional Windows driver. White underprint and overprint, and the paper print modes, need ProRIP.

Did this fix it?