Support
Machine type
Brand
Epson SureColor F170

Sublimation ghosting, faded colors and blurry prints: causes and fixes

✓ Reviewed by Jason KimUpdated 1 min readFits: F170 · F570 · F6370 · F6470 · F6470H
Short answer

Ghosting, a faint blurry double image, happens when the transfer paper shifts during pressing, so tape it down or use adhesive paper. Faded or dull colors usually come from a clogged nozzle, the wrong paper type or color setting in the driver, old ink, a low-polyester blank, or too little time, heat or pressure. Print a nozzle check first so you know whether it's the printer or the press.

Match your symptom

What you see Most likely cause Go to
Faint shadow or double outline beside the design Paper shifted during pressing (ghosting) Ghosting
One color missing or wrong across the whole print (reds look orange, blacks look brown) Clogged nozzle Faded colors, step 1
Everything a bit pale or dull Settings, paper, ink age or press Faded colors, steps 2 to 5
Image reads backwards on the item Mirror Image off Faded colors, step 2
Soft or fuzzy edges Paper movement, or press time and heat Ghosting, then step 5

Ghosting

Ghosting is a faint, blurry double image caused by the transfer shifting during pressing.

  1. Fix the paper in place

    Tape the transfer to the blank with heat-resistant tape, outside the image area, or use an adhesive (tacky) sublimation paper made for fabric.

  2. Open and unload smoothly

    Lift the press and remove the paper without dragging it across the hot surface.

  3. Keep the setup steady

    Make sure the blank lies flat and can't shift as the press closes.

Faded or dull colors

  1. Rule out the printer first

    Print a nozzle check. If lines are missing, clean the head before changing anything else. A missing magenta or cyan shifts every color. See the clogged nozzle guide for your printer.

  2. Check driver settings

    The paper type or media type must match the paper loaded. Mirror Image should be on. Manage color in one place only, in the driver or in your design program, not both. Faster quality modes can reduce quality.

  3. Check the ink

    Epson says to use ink before its expiry date, shake bottles before filling, and refill tanks that are low. On the F170, ink in the tank carries Epson's print quality guarantee for 25 days after refilling.

  4. Check the paper

    Use flat paper that isn't wrinkled, folded or bent, printed on the correct side. Epson recommends using its transfer paper at 59 to 77 °F and 40 to 60% humidity and loading it just before printing so it doesn't go wavy.

  5. Check the blank and the press

    Higher polyester content gives brighter color. Press at the time, temperature and pressure your paper and blank makers specify.

Change one thing at a time and press a test piece after each change. Otherwise you won't know what fixed it.

Still stuck? Text us photos of the pressed item, the used transfer sheet and a nozzle check at (562) 609-4996.

Common questions

My print looks bright on paper but dull after pressing.

Judge color on the pressed item, not on the printed sheet. If the pressed result is dull, check the polyester content of the blank and press to the paper maker's time, temperature and pressure.

Colors look fine on one shirt and faded on the next.

Compare the fabric labels. Lower polyester content gives lighter color.

Why does my transfer look different from my screen?

Monitors and printers produce color differently, so they never match exactly. Epson suggests calibrating your monitor, using the right output profile, and judging prints in good light.

My sublimation paper isn't sticking anymore.

Check how the paper was stored. Beaver Paper recommends keeping its paper in the original packaging, at 36 to 51% relative humidity, away from heated or air-conditioned air currents. If a new box behaves differently from your usual stock, contact us with the lot details.

There are roller marks or the ink rubs off the paper.

Epson says this can happen with non-Epson transfer paper. Make sure the paper type in the driver matches the paper loaded.

Did this fix it?