Support
Machine type
Brand
Epson SureColor F170

Epson F170 and F570 maintenance box full: how to check and replace it

✓ Reviewed by Jason KimUpdated 2 min readFits: F170 · F570 · F570 Professional Edition
Short answer

The maintenance box collects the small amount of ink used in cleanings. When it's full, the printer stops printing and cleaning so ink can't leak. Replace it when the screen asks: the F570 box (C13S210057) slides out from behind a cover on the back. Don't touch the green chip, don't tilt the used box, and seal it in the bag that comes with the new one.

Check how full it is

  • F170: on the printer, choose Maintenance > Remaining capacity of Maintenance box. On Windows, open the driver's Maintenance tab and click EPSON Status Monitor 3.
  • F570: the supply status on the LCD screen shows the box level, as does the printer utility on your computer.

Before you replace it

  • Wait until the printer isn't printing or cleaning. Replacing it mid-job can leak ink.
  • Don't touch the green chip on the side of the new box.
  • Keep the old box level until it's sealed in the plastic bag.
  • Wear gloves. If ink gets on your skin, wash with soap and water.

Replace it on the F570

  1. Open the guide on screen (optional)

    Choose Settings > Maintenance > Replace Maintenance Box > See Guide to follow along with an animation.

  2. Remove the old box

    Open the maintenance box cover on the back of the printer and pull the box out carefully without tilting it.

  3. Insert the new box

    Unpack the new box, line up its groove with the rails inside the printer and push it all the way in.

  4. Seal and close

    Put the used box in the bag supplied with the new one and seal it. Close the cover.

Replace it on the F170

  1. Follow the on-screen animation

    When the replacement message appears, the F170 shows an animation of the steps on its control panel. Follow it exactly.

  2. Check the cover

    If the cover won't go back on, the box isn't seated. Take it out and install it again.

  3. Bag the old box

    Seal it in the plastic bag before you tilt it or carry it.

Make a box last longer

  • Clean the print head only when a nozzle check shows gaps. Epson says cleaning uses ink, so clean only when quality declines.
  • Follow the cleaning order in your printer's clogged nozzle guide. The stronger cleanings (Power Cleaning on the F170, Powerful Cleaning and Power Ink Flushing on the F570) send much more ink to the box.
  • Keep a spare box on hand before running a strong cleaning, because the printer won't print or clean once the box is full.

F570 messages about the box

Message What to do
The maintenance box is not recognized Remove and reinsert it. If the message stays, insert a new box
Cannot start cleaning because the maintenance box is full Replace the box before cleaning. Epson says the used box may be reinstalled after the cleaning is completed

After replacing

Used maintenance boxes count as industrial waste in Epson's guidance. Dispose of them according to local rules. If the printer still asks for a new box after you've fitted a new one, text us a photo of the message at (562) 609-4996.

Common questions

Is a full maintenance box a sign the printer is broken?

No. Epson says it's a normal, user-replaceable part. Epson's warranty doesn't cover the cost of replacing it.

Why did my box fill up so fast?

Head cleanings, and especially Power Cleaning (F170) or Powerful Cleaning and Power Ink Flushing (F570), send ink to the box. A run of cleanings can use up a box quickly.

Can I move a maintenance box to another printer?

No. Epson says once a box has been installed in a printer it can't be used in another.

Which box do I need?

The F170 and F570 use different boxes. Epson lists part C13S210057 for the F570. For the F170, use the maintenance box made for the F170, and check the part number on the old box if you're unsure.

Can I reuse an old box I took out a while ago?

Epson says no if it has been out for a long time: the ink inside dries and the box can't absorb more.

Sources
Did this fix it?