Support
Machine type
Brand
Epson SureColor F170

Epson F170 magenta (or another color) missing: nozzle check, head cleaning and Power Cleaning

✓ Reviewed by Jason KimUpdated 2 min readFits: F170
Short answer

Print a nozzle check from Maintenance > Print Head Nozzle Check and clean only if lines are missing. If three rounds of nozzle check and cleaning don't fix it, turn the printer off and leave it at least 12 hours without printing, then check again. Only then run Power Cleaning, with every ink tank at least half full. If that fails too, Epson support needs to look at it.

Match your symptom

What you see Most likely cause Go to
Reds look orange or yellow, skin tones look green Magenta missing Steps 1 to 3
Some lines missing in the nozzle check Partial clog Steps 2 and 3
Most lines missing in one or more colors Severe clog, or ink was run too low Steps 4 and 5
Nozzle check is perfect, colors still off Settings or paper, not the head Our driver and color guide
Vertical lines misaligned, or blurry Head alignment Step 6

Step by step

  1. Check the ink tanks

    Look at every tank. If any is near the lower line, refill it first: the printer may not clean when ink is low, and printing below the lower line can damage it. Note when you last refilled. Ink in the tank is guaranteed for 25 days.

  2. Print a nozzle check

    Load letter-size paper. On the printer choose Maintenance > Print Head Nozzle Check and follow the screen. From a computer, it's Print Head Nozzle Check on the driver's Maintenance tab (Windows) or in the Printer Utility (Mac). Take a photo of the pattern.

  3. Clean if lines are missing, then check again

    If all lines print, stop: the head is fine. If some lines are missing, choose the option to clean the print head and follow the screen, then print the pattern again. Don't open the cover or turn the printer off during a cleaning. Repeat up to three times.

  4. Rest it for 12 hours

    If three rounds haven't fixed it, stop cleaning. Leave the printer at least 12 hours without printing. Epson recommends turning it off with the power button. Then print another nozzle check.

  5. Power Cleaning

    If it's still not right, or if most lines were missing to begin with, run Power Cleaning. It replaces all the ink inside the ink tubes. First make sure every tank is at least half full and the maintenance box has room. On Windows it's Power Cleaning on the driver's Maintenance tab; on a Mac it's in the Printer Utility. Follow the screen, then print a nozzle check. Wait 12 hours before any second Power Cleaning.

    Power Cleaning uses a lot of ink and fills the maintenance box faster. Have a spare maintenance box on hand.

  6. If lines look misaligned instead

    Load the paper you print on and choose Maintenance > Print Head Alignment. Pick Vertical Alignment for blurry prints or misaligned vertical lines, or Horizontal Alignment for regular horizontal banding.

Still missing after Power Cleaning?

Epson's guide says to contact Epson support at that point. Send us your nozzle check photos and your purchase date and we'll help you with the next step, including warranty.

Epson's video: printing a nozzle check on the F170

Embedded from the manufacturer's official channel.

Common questions

Why is magenta the color that disappears?

Epson doesn't single out one color. Any channel can clog, and when magenta is missing, reds and skin tones turn yellow or green, so it's the one people notice first. Follow the same steps for any color.

Can I run Power Cleaning with low ink?

No. Epson says to check visually that every tank is at least half full first, because low ink during Power Cleaning can damage the printer. The printer also won't start it if ink or maintenance box space is too low.

How often can I run Power Cleaning?

Wait 12 hours between Power Cleanings. Epson says one Power Cleaning should normally resolve the problem within that time.

I haven't used the printer in months. Is the old ink still good?

Epson's print quality guarantee for ink in the tank is 25 days after refilling or the bottle's expiry date, whichever comes first. Old or expired ink is a common cause of faint or off colors.

The nozzle check is perfect but colors still look wrong.

Then it's not a clog. Check your paper type and color settings in our F170 and F570 driver and color guide.

Did this fix it?