Machine type
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
Epson SureColor G6070 DTF printer
Mimaki TxF300-1600
Mimaki TxF330-800
STS XPD-924D DTF Printer (Mutoh)
STS VJ-628D DTF Printer (Mutoh)
DTF Station Vega S17
STS XpertJet 1682D (XPJ-1682D) 64 inch DTF Printer
STS XPD-724 DTF Printer (Mutoh)
Hotronix Fusion IQ, Air Fusion IQ and Dual Air Fusion IQ
Geo Knight DK20S and DK20SP Digital Knight Swing-Away Presses
DTF Station Maxima and Proxima Dual Heat Presses
Hotronix Auto Open Clam and Hover Heat Press
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
Insta 718, 728 and 828 Automatic Swing-Away Heat Presses
DTF Station Prisma Sentry Heat Press
Geo Knight DC16 and DC16AP Digital Combo Swing-Away Presses
Geo Knight DK Digital Clamshell Presses: DK20, DK16, DKA Auto, DK8 Label and DK7 Cap
Hotronix Auto Open Cap Press and 360 IQ Hat Press
Hotronix Craft Heat Press 9 x 12
Hotronix Mighty Mug Heat Press
Insta 256 and 288 Manual Swing-Away Heat Presses
Insta 907 Dual Station Shuttle Label Heat Press
Viper MAXX pretreatment machine
Ecofreen Mister-T2 and Mister-T2 Pro pretreatment machines
Pearl Elite and Pearl PTM DTG pretreatment machines
Viper XPT-1000 pretreatment machine
Lawson Silver-Jet and Silver-Jet V2 DTG Pretreat Sprayers
Lawson Zoom-AE DTG pretreatment machine
Viper MINI handheld DTG pretreatment machine
Brand
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
DTF Station Aries 124 UV DTF printer
Miro DTF Powder Shakers: Miro 13 Max, 16, 24 and 36
DTF Station Aries 213 and Aries 113 UV DTF printers
Seismo L16R and L24R DTF Powder Shaker and Dryer
Phoenix Air 16x20 DTF Curing Oven
DTF Station Maxima and Proxima Dual Heat Presses
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
DTF Station Vega S17
DTF Station Prisma Sentry Heat Press
DTF Station Seismo V36R DTF Powder Shaker and Dryer
DTF Station Arc 127 automatic cutter for DTF and UV DTF film
Epson SureColor F2100
Epson SureColor G6070 DTF printer
Epson SureColor F2270
Epson SureColor F3070
Epson SureColor F570
Epson SureColor F170
Epson SureColor F6470 and F6470H
Epson SureColor F6370
Epson SureColor F7200
Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)
Epson SureColor T-Series CAD and technical printers
Epson SureColor S-Series (S40600, S60600, S80600)
NeoStampa white ink settings: white amount, choke for halos and gaps, fine text, transparency and halftone
Change the white amount with White Effect Layer > Flat > Intensity for one image, or in the profile's white ink settings for every job. If white peeks out around the edges, raise the choke a little (switch units to millimeters) and check it in Raster Preview with only Black and White shown. If thin lines lose their white, raise the art resolution and lower the choke for that job, then set it back.
The white layer prints under your colors so they show up on dark garments. How much white NeoStampa lays down, and how far it is pulled in from the edges (the choke), decides whether you get a white halo, gaps, or thin lines that disappear. Before changing anything, print a nozzle check: if white nozzles are missing, fix that first with your printer's white ink guide. Settings can't make up for clogged nozzles.
| What you see | Likely fix |
|---|---|
| White peeking out past the color edges | Increase the choke slightly |
| Thin white gaps between colors | Adjust the choke and check it in raster preview |
| Small text and thin lines lose their white | Higher-resolution art and less choke for that job |
| Too much or too little white overall | White intensity, per image or in the profile |
| Soft edges or gradients printing oddly | Transparency, white opacity or halftone |
Set the white amount
-
For one image
Click the image, open White Effect Layer on the right, set Method to Flat and change Intensity (%). Lower it if there's too much white (DTF Station's example is 70%), raise it if there isn't enough, and click Save.
-
For every job on a profile
Click the three-dot menu in the upper right and choose the correct profile. Click the white ink icon next to the 5-color option, choose White, change Intensity (%) and click OK.
Set the choke
-
Find it
In the same white ink settings, find Choke. Right-click the value to switch units to millimeters.
-
Change it in small steps
If white is picking up around the edges, increase the choke a little, for example to 1 mm. Click OK and choose Yes to apply it to all images.
-
Check it before printing
Click Print and choose Process Only. In the job queue, right-click the processed job and open Raster Preview. Turn off every channel except Black and White to see exactly where white will land. Adjust the edge behavior for smoother curves or sharper corners if you need to, then test on real fabric.
Fine text and thin lines
When white underbase doesn't fully cover small details, DTF Station's fix for that job is:
-
Raise the art resolution
In Photoshop, open Image > Image Size and raise the resolution by four times (for example 300 DPI to 1200 DPI). Save it as a new file and import it into a new NeoStampa job.
-
Reduce the choke for this job
Open the Print Scheme Manager, open Custom Inks next to the Color Mode list, choose White Ink and go to Choke. Switch units to points and lower the value, in DTF Station's example from 0.3 to 0.1. Click OK and save the scheme.
-
Put it back afterward
Return the choke to your normal value when the job is done. Leaving it low affects regular jobs. Avoid huge DPI values too: very large files slow the RIP.
Transparency, white opacity and halftone
- Opacity: lowers color ink in semi-transparent areas and softens layered details.
- Discard Gradient Transparency: turns transparent gradients into solid color when transparency is printing badly.
- White Opacity: controls how solid the white base is, which changes coverage, vibrancy and how much fabric shows through.
- Punch & Halftone: breaks gradients into a pattern of small holes for smoother fades and a softer, more breathable print. Choose the mode and shape, click Apply, then check it in Raster Preview.
Still seeing a halo or patchy white? Text us a photo or short video at (562) 609-4996 of the print, your nozzle check and your white ink settings screen.
Watch DTF Station adjust white ink amount and choke in NeoStampa
More videos
Embedded from the manufacturer's official channel.
Common questions
What is white choke?
How far the white underbase is pulled in from the edge of the color. More choke hides white halos; less choke keeps white under thin lines.
How do I see where the white will print?
Process the job only, right-click it in the job queue, open Raster Preview and turn off every channel except Black and White.
My small text loses its white. What can I do?
Increase the artwork resolution by four times and lower the choke for that job, as DTF Station shows, then return the choke to normal afterward.
Should I change white per image or in the profile?
Per image for a one-off design. In the profile when every job needs more or less white.
The white looks thin no matter what I set. Why?
Check the nozzle check first. Missing white nozzles or settled white ink can't be fixed in the RIP.
- DTF Station: How to adjust white ink amount and white choke settings in NeoStampa
- DTF Station: How to use the Choke tool to eliminate white peek in NeoStampa
- DTF Station: How to adjust transparency and remove semi-transparencies in NeoStampa
- DTF Station: How to use the Punch or Halftone tool in NeoStampa
- DTF Station technical documentation
- AA support requests about white ink on Prestige printers, 2024 to 2026










































































