Support
Machine type
Brand
DTF Station Aries 213 and Aries 113 UV DTF printers

NeoStampa color matching: replace a color, print color charts, use spot colors and knock out backgrounds

✓ Reviewed by Jason KimUpdated 2 min readFits: NeoStampa (DTF Station Edition) · Prestige R1 · R2 Pro · R2 upgraded to NeoStampa · L2 · XL2 · XL2 Pro · XL3 · XL4 · X6 · Aries
Short answer

Click Color Replacement, pick the color that prints wrong and enter new values; the rule swaps that exact input color from then on. To find the right value, open Variations and print a color chart, then use the patch that matches. Tick Knockout and adjust Tolerance to drop a background that matches the garment. Use Color Adjustments for overall brightness, contrast and saturation.

When a logo color prints off, or a design has a background you don't want printed, NeoStampa can fix it at the RIP without editing the artwork. Start with a clean nozzle check: missing nozzles change color too, and no setting fixes that.

Problem Tool to use
One specific color prints wrong Color Replacement, plus a color chart to find the right value
Need to hit a brand color reliably Device-link spot color library
Background matches the shirt and shouldn't print Color Knockout
Whole image too dull, dark or flat Color Adjustments

Replace one color

  1. Pick the color

    Load your image, click the Color Replacement icon on the left (it's also in the properties panel) and click the color you want to fix. The dialog shows its current values.

  2. Change it

    Edit the values, for example raise R to 255 on an orange that prints dull, and click OK. From then on, that exact input color is swapped for your new one.

  3. Know its limits

    A rule only affects that exact value. On gradients it can cause odd shifts, so delete the rule when you print gradient images.

Print a chart to find the right value

  1. Open Variations

    Open Color Replacement on the same color and click Variations, then choose to print a color chart.

  2. Set the spread

    Deviation sets how far the patches stray from your color. Steps sets how many patches (8 makes a larger chart). Adjust the patch size and click OK.

  3. Print it

    Switch the cursor to Selection, rotate the chart if needed, remove other images, click Nest and print.

  4. Choose and apply

    Pick the patch that matches what you want, on the actual garment if you can, and put its values into your artwork or replacement rule.

The Color Chart tool goes further. One Color Variation builds a chart around a base color with your chosen deviation, steps per channel, patch size and spacing. Four Corner Variations uses your printer profile to show blends between colors. Printed charts can also be measured with a spectrophotometer.

Design with spot colors that match your printer

  1. Print the library

    Print the Inedit device-link spot color library from NeoStampa. It shows how each color actually comes out on your printer, ink and film.

  2. Load it in Illustrator

    In Adobe Illustrator, open Swatches > Other Library and import the library file. Design using only those spot colors, checking against your printed chart.

  3. Check in NeoStampa

    Import the design, open Color Replacement to see input and output colors, and fine-tune ink values if one doesn't match your printed reference.

Knock out a background color

  1. Select it

    Open Color Replacement, click the part of the design that matches your garment color and tick Knockout.

  2. Adjust tolerance

    Raise or lower Tolerance (%) until the background disappears cleanly from the preview.

  3. Preview on the right color

    Click Media Size, double-click to open the media color selector and pick your garment color, so the preview shows how it will look.

Brightness, contrast and saturation

Select an image and click Color Adjustments in the upper right. Move the sliders, check the sample and click Apply. Adjust one image at a time for best results. To apply the same values to every image you load, click the three-dot icon, choose Advanced > Input Defaults, tick Enable Color Adjustments, set the values, click OK, then Save and Yes.

Still can't match a color? Text us a photo or short video at (562) 609-4996 of the print next to the target and a screenshot of your Color Replacement window.

Watch DTF Station replace colors and print color charts in NeoStampa

More videos

How to use the Color Replacement tool
How to use the Color Knockout tool
How to create multi color charts
How to use the NeoStampa device spot color library

Embedded from the manufacturer's official channel.

Common questions

Why does my orange (or red) print differently from the screen?

Screens and DTF inks reproduce color differently. Print a variation chart from Color Replacement, pick the patch that looks right on the garment and use its values.

Will a color replacement rule affect my gradients?

It can. A rule swaps one exact value, so delete it when you print gradient images if colors shift unexpectedly.

How do I remove a black background on a black shirt?

Open Color Replacement, click the background, tick Knockout and adjust Tolerance until it disappears. Set the media color to black to preview it.

Can I make brightness or saturation changes apply to every job?

Yes. Use the three-dot icon > Advanced > Input Defaults, tick Enable Color Adjustments, set the values and save.

What is the device-link spot color library?

A printable library of spot colors tuned to your printer and ink. Load it into Illustrator, design with those swatches, and they print as charted.

Did this fix it?