Support
Machine type
Brand
DTF Station Prestige R1

NeoStampa for Prestige printers: install, activate the USB dongle, and add your printer

✓ Reviewed by Jason KimUpdated 2 min readFits: NeoStampa (DTF Station edition) · Prestige R2 Pro · R1 · L2 · XL2 · XL2 Pro · XL3 · XL4 · X6 · R2 upgraded to NeoStampa
Short answer

NeoStampa for DTF Station printers is licensed by a USB dongle, not a code: the dongle is your license, and NeoStampa won't open or print without it. Download NeoStampa from your Quick Start Guide, install it, plug in the dongle (its light turns green), register with your account details and the emailed verification code, then add the DTF Station driver for your printer on TCP/IP and import your print schemes. If the dongle won't validate, unplug every other USB device, restart and try again.

Before you start

  • Find the dongle. It ships in bright yellow packaging marked IMPORTANT, with the printer or with a NeoStampa purchase. The serial number printed on it is what you register with DTF Station, as your Quick Start Guide explains.
  • Have your Quick Start Guide PDF (USB drive or dealer email). If you don't have it, contact us.
  • Use the Windows PC that runs your printer's control software.

Install and activate

  1. Download NeoStampa

    Open the Quick Start Guide PDF, go to the resources section, open the NeoStampa folder and pick your printer model. Click the NeoStampa RIP download and choose Download anyway if your browser warns you. Version numbers change over time, so use whatever the guide links to.

  2. Install it

    Double-click the installer, choose your language, click OK, accept the license, click Next twice and then Install. It usually takes under 10 minutes. Click Finish.

  3. Plug in the dongle

    Insert the dongle and check that its light turns green. Open NeoStampa Delta and click Yes on any prompts. The first launch can take a few minutes while the dongle installs.

  4. Register

    When the registration window appears, enter your account details and click Continue. Enter the verification code from the email (it comes from neostampa or inedit.com) and click Continue. Enter your printer details, select your main printer and any others you own, and click Request Trial. When the success message shows, click Continue Trial, then OK.

  5. Add the printer driver

    When asked, click Add, select DTF Station, choose your printer's driver and click Install, then OK. Set the connection type to TCP/IP and click Close.

  6. Check the license

    Go to Help > Activation Keys and confirm the license shows as valid. Click Info, select the dongle, and confirm it's active and has an expiration date listed.

Import your print schemes

  1. Download the schemes

    In the Quick Start Guide resources, open the NeoStampa folder for your model and download the print modes you want. Right-click each download, choose Extract All, and move the extracted folders somewhere safe like the Desktop. Don't delete them later.

  2. Import into NeoStampa

    Click New Job, choose DTG / DTF as the document type, select your printer and click OK. Click the three-dot icon to open the Scheme Manager, click Add, open the extracted folder and its subfolder, and double-click the .CPS file. Repeat for each print mode.

  3. Set up your media

    In a new job, set the media width to match your film. Create a media profile and set its color to RGB 105, 105, 105, the gray DTF Station uses so white areas preview correctly. Save it.

If the dongle won't validate

Unplug every USB device except the dongle, restart the computer and open NeoStampa again. If it still fails, Text us a photo or short video at (562) 609-4996 of the error and the dongle's light.

Watch DTF Station's video: activating the NeoStampa dongle and installing the printer driver

Embedded from the manufacturer's official channel.

Common questions

I lost the dongle. Can I get a new code instead?

No. The dongle is the license, and replacing a lost or thrown-away dongle is the owner's cost. Contact us if it happens.

The screen says "Request Trial" and "Continue Trial". Am I on a trial?

Those buttons are part of DTF Station's normal activation flow. Afterwards, check Help > Activation Keys: the license should show as valid and the dongle as active with an expiration date.

Which print mode should I import?

DTF Station's standard mode is the 1800 one (for example 720 x 1800 on the R2 Pro). You can import several and choose per job.

I imported a scheme and get "Printing mode not supported". What do I do?

Select the scheme, set it to Five Color, pick the right quality, ignore the pass count, open the mode colors, change the Orange channel to White, then click OK and Save.

I have an older printer that came with DigiRIP. Can I switch?

Yes, DTF Station offers a DigiRIP to NeoStampa upgrade. Text us your printer model and we'll confirm it's supported.

Did this fix it?