Machine type
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
Epson SureColor G6070 DTF printer
Mimaki TxF300-1600
Mimaki TxF330-800
STS XPD-924D DTF Printer (Mutoh)
STS VJ-628D DTF Printer (Mutoh)
DTF Station Vega S17
STS XpertJet 1682D (XPJ-1682D) 64 inch DTF Printer
STS XPD-724 DTF Printer (Mutoh)
Hotronix Fusion IQ, Air Fusion IQ and Dual Air Fusion IQ
Geo Knight DK20S and DK20SP Digital Knight Swing-Away Presses
DTF Station Maxima and Proxima Dual Heat Presses
Hotronix Auto Open Clam and Hover Heat Press
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
Insta 718, 728 and 828 Automatic Swing-Away Heat Presses
DTF Station Prisma Sentry Heat Press
Geo Knight DC16 and DC16AP Digital Combo Swing-Away Presses
Geo Knight DK Digital Clamshell Presses: DK20, DK16, DKA Auto, DK8 Label and DK7 Cap
Hotronix Auto Open Cap Press and 360 IQ Hat Press
Hotronix Craft Heat Press 9 x 12
Hotronix Mighty Mug Heat Press
Insta 256 and 288 Manual Swing-Away Heat Presses
Insta 907 Dual Station Shuttle Label Heat Press
Viper MAXX pretreatment machine
Ecofreen Mister-T2 and Mister-T2 Pro pretreatment machines
Pearl Elite and Pearl PTM DTG pretreatment machines
Viper XPT-1000 pretreatment machine
Lawson Silver-Jet and Silver-Jet V2 DTG Pretreat Sprayers
Lawson Zoom-AE DTG pretreatment machine
Viper MINI handheld DTG pretreatment machine
Brand
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
DTF Station Aries 124 UV DTF printer
Miro DTF Powder Shakers: Miro 13 Max, 16, 24 and 36
DTF Station Aries 213 and Aries 113 UV DTF printers
Seismo L16R and L24R DTF Powder Shaker and Dryer
Phoenix Air 16x20 DTF Curing Oven
DTF Station Maxima and Proxima Dual Heat Presses
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
DTF Station Vega S17
DTF Station Prisma Sentry Heat Press
DTF Station Seismo V36R DTF Powder Shaker and Dryer
DTF Station Arc 127 automatic cutter for DTF and UV DTF film
Epson SureColor F2100
Epson SureColor G6070 DTF printer
Epson SureColor F2270
Epson SureColor F3070
Epson SureColor F570
Epson SureColor F170
Epson SureColor F6470 and F6470H
Epson SureColor F6370
Epson SureColor F7200
Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)
Epson SureColor T-Series CAD and technical printers
Epson SureColor S-Series (S40600, S60600, S80600)
Moving NeoStampa and Pilot to a new computer (Prestige printers)
Before you switch, export both firmware backup files from Pilot, photograph your Pilot settings and calibration values, and save your artwork and job files. On the new Windows PC, install Pilot (or Hosonsoft) from your Quick Start Guide, connect the printer by Ethernet and set the network adapter and IP. Then install NeoStampa, move the USB dongle to the new computer, add the DTF Station driver and re-import your print schemes. The dongle is the license, so it simply moves with you.
On the old computer (if it still works)
-
Export both firmware backup files
In Pilot, click Advanced, enter the password from your Quick Start Guide and click Confirm. On the Firmware tab, click Export Firmware Configuration and save it with a clear name, such as your printer model and today's date. Then click Export Firmware Configuration Parameter and save that too. Always keep the two files together.
-
Photograph your settings
Take photos of Pilot's settings page (including the print start position) and your calibration values. The bidirectional value matters most, because it controls sharpness.
-
Copy your files
Copy the two backup files, your artwork and saved job files, and your extracted NeoStampa scheme folders to a USB drive.
On the new computer
-
Check the computer
It must be a Windows PC (Windows 11, Intel i5 or i7 at 2.6 GHz or faster, 8 GB of RAM or more, 500 GB free, preferably on an SSD) with an Ethernet port or adapter. No Mac or tablet.
-
Install the control software
For Pilot, download it from your Quick Start Guide (the version must suit your printer model), allow it through your antivirus, and install it, letting the Microsoft Visual C++ packages install too. For Hosonsoft, extract your printer's Hosonsoft folder and run PrintExp.exe, choosing More info > Run anyway if Windows warns you. If it shows errors on opening, install the vc_redist.x64 file from the same software folder.
-
Connect the printer
Plug the Ethernet cable straight from the printer to the new computer. Choose the right network adapter and IP address as in our connection guide, until both icons turn green. Set the language to English if needed.
-
Compare your settings
Check Pilot's settings against your photos and fix anything that differs, especially the print start position. Print a nozzle check and a test print.
-
Install NeoStampa and move the dongle
Install NeoStampa from the Quick Start Guide, then plug the dongle into the new computer and wait for the green light. If NeoStampa asks you to register, use the same account details as before. Add the driver (Add > DTF Station > your printer, connection TCP/IP) and confirm the license under Help > Activation Keys. See our NeoStampa install guide for every screen.
-
Re-import schemes and media
Import your print schemes from the scheme folders you copied, recreate your media profiles (color RGB 105, 105, 105), and re-enter your ink and film costs in the Control Center if you use cost tracking.
-
Check the bridge program
If NeoStampa can't send jobs, confirm NW Receive is running in Task Manager (see our connection guide).
Need a hand? Text us a photo or short video at (562) 609-4996 and we can connect to the new computer remotely.
Watch DTF Station's video: downloading and installing NeoStampa from your Quick Start Guide
Embedded from the manufacturer's official channel.
Common questions
Do I need to deactivate NeoStampa on the old computer?
The license lives on the dongle, so moving the dongle moves the license. NeoStampa won't open on the old computer once the dongle is gone.
Do I have to re-import the firmware into the printer?
Usually not. The printer keeps its own settings. Keep the backup files safe, compare your new Pilot settings against your photos, and only import firmware if we ask you to.
My computer died and I never made a backup. Am I stuck?
No. Install the software on the new computer and text us. We can supply the default firmware for your model and help you re-enter your calibration.
I use DigiRIP, not NeoStampa. How do I move it?
DigiRIP uses an activation code that must be released from the old computer first. See our DigiRIP activation guide.
NeoStampa opens on the new computer but cost calculation or the server doesn't work.
DTF Station has a reset procedure for NeoStampa's shared settings folder. It wipes saved costs and custom modes, so text us and we'll walk you through it.
- DTF Station: How to back up firmware and firmware parameters for Pilot
- DTF Station: Pilot, how to download DTF Pilot (system requirements)
- DTF Station: Activating the NeoStampa dongle and installing the printer driver
- DTF Station: NeoStampa, how to reset the public folder
- DTF Station Prestige R2 Pro Quick Start Guide
- DTF Station Prestige R2 Pro user manual: Hosonsoft installation
- DTF Station technical documentation
- AA and DTF Station support requests about reinstalling software on a new computer, 2024 to 2026











































































