Support
Machine type
Brand
DTF Station Aries 213 and Aries 113 UV DTF printers

NeoStampa printer schemes (ICC profiles): import print modes, fix "printing mode not supported", set film width and check ink order

✓ Reviewed by Jason KimUpdated 2 min readFits: NeoStampa (DTF Station Edition) · Prestige R1 · R2 Pro · R2 upgraded to NeoStampa · L2 · XL2 · XL2 Pro · XL3 · XL4 · X6 · Aries
Short answer

Download your printer's schemes from the NeoStampa folder in your Quick Start Guide, extract them and keep the folders. In NeoStampa, start a New Job, open the Scheme Manager with the three-dot icon, click Add and double-click each print mode's CPS file. Set film width under Media Width and save it as a preset. If colors land in the wrong place, print the ink setup chart and send us a photo with a screenshot before changing channels.

NeoStampa needs a printer scheme for each print quality you use. A scheme holds the color profile (ICC) and the ink setup for your model, so without the right one, colors and white come out wrong or the job won't print. These steps use the Prestige R2 Pro as the example; the process is the same on other Prestige and Aries printers.

Download the schemes

  1. Find them in your Quick Start Guide

    Open your Quick Start Guide PDF, use the Important Resources link or QR code, open the NeoStampa folder and choose your printer model.

  2. Pick your print modes

    Each print mode is a separate download, for example 720 x 1800, 720 x 2400 and 1200. For everyday printing, 1800 is the standard. Larger files take longer to download and unzip.

  3. Extract and keep them

    Right-click each download and choose Extract All. Move the extracted folders somewhere safe, such as the desktop, and don't delete them later. NeoStampa uses those files after import.

Import a scheme

  1. Open the Scheme Manager

    In NeoStampa, click New Job, choose DTG / DTF, select your printer and click OK. Click the three-dot icon at the top to open the Scheme Manager, then click Add.

  2. Load the CPS file

    Browse into the extracted folder for the first print mode, open its subfolder and double-click the CPS file. The scheme appears in the list.

  3. Repeat

    Add each print mode you downloaded the same way, then click through them to confirm they're all there.

"Printing mode not supported"

If this appears after importing on an R2 Pro, select the scheme and set the print mode to Five Color with the matching quality (for example 720 x 1800). Ignore the pass count. Open the mode colors, change the Orange channel to White, click OK, then Save and Yes. On other models, text us before changing channels, because the ink setup differs.

Set your film width

  1. Change it for one job

    In a new job with the right scheme open, find Media Width (13 in by default on the R2 Pro). Right-click it to switch between inches, millimeters and centimeters, then type your width. The preview resizes.

  2. Save it as a preset

    Click New, give it a format name and page width, and save. It then appears under Predefined Sizes, where you can edit it, remove it or add margins.

Check the ink order

If colors print in the wrong places (for example red where green should be), NeoStampa's ink order may not match the printer's dampers.

  1. Print the ink setup chart

    Open the Printer Scheme Manager, click the scheme's three-dot menu, choose Edit and click Print. The printer outputs each ink with its channel number underneath.

  2. Send us both views

    Take a clear photo of the printed chart and a screenshot of NeoStampa's Custom Ink Setup page, and text both to us. We'll confirm whether they match before anything is changed.

  3. Swap the channels if we confirm it

    Select each mismatched ink in the list and change it to the correct color, then click OK, Save and Yes. NeoStampa rebuilds the profiles to match.

Changing ink channels on a scheme rebuilds its profiles. Only swap them once the chart shows a real mismatch.

Scheme won't import, or the wrong printer shows in New Job? Text us a photo or short video at (562) 609-4996 of the screen.

Watch DTF Station import NeoStampa printer schemes from the Quick Start Guide

More videos

How to create new media in NeoStampa
How to print a custom ink setup chart and change the ink order in NeoStampa

Embedded from the manufacturer's official channel.

Common questions

What is a printer scheme in NeoStampa?

It's the profile package for one print mode on your printer, including the ICC color profile and ink setup. You import one for each print quality you use.

Which print mode should I use?

DTF Station calls 1800 (720 x 1800) the standard for everyday printing. Higher modes trade speed for detail.

Can I delete the scheme folders after importing?

No. Keep the extracted folders in a safe place. Deleting them can cause problems later.

Why does NeoStampa say printing mode not supported?

The imported scheme's mode or channels don't match. On an R2 Pro, set it to Five Color with the right quality and change the Orange channel to White, then save.

How do I change the film width?

Edit Media Width in the job, or click New to save a named width preset that shows under Predefined Sizes.

Did this fix it?