Support
Machine type
Brand
Epson SureColor G6070 DTF printer

Epson G6070 clogged nozzles: nozzle check, head cleaning levels, and why it keeps stopping to clean

✓ Reviewed by Jason KimUpdated 3 min readFits: G6070
Short answer

Print a nozzle check, run Auto Cleaning, then Cleaning (Light), (Medium) and (Heavy) only on the rows with gaps. If several cleanings don't clear it, clean around the print head and the suction cap, then clean again: a dirty cap weakens suction so cleanings stop working. If the printer keeps pausing to check and clean mid-job, fix the clog first, then set Nozzle Clog Detection to check Between Jobs.

Match your symptom

What you see Go to
Gaps or faint rows in the nozzle check Steps 1 to 3
Still clogged after several cleanings Step 4
White lines bent sideways on the check Our G6070 white ink guide
Printer stops every few minutes to check or clean Auto nozzle checking, below
Clean check, but stripes or graininess in prints Our G6070 film loading guide (feed and head alignment)

Step by step

  1. Print a nozzle check

    With the printer ready and film loaded, press the Maintenance icon, then Print Head Nozzle Check > Start. Hold the feed button to bring the pattern into view. The labels under the pattern tell you which color and row each block is. If the printer has sat unused, shake the White pack first. Tip: turn the connection icon on the home screen off so a job can't start while you work, then turn it back on.

  2. Run Auto Cleaning

    Press Maintenance > Head Cleaning > Auto Cleaning, then Start. The printer checks the nozzles itself and cleans at the strength it needs. If nothing is clogged, it doesn't clean. Answer Yes when it offers a nozzle check afterward.

  3. Step up: Light, then Medium, then Heavy

    If gaps remain, choose Cleaning (Light). Pick Select Nozzles and choose only the rows that showed gaps, or All Nozzles. Check again. Repeat once at Light, then move to Cleaning (Medium) and finally Cleaning (Heavy), checking after each one. Each cleaning uses ink from every color, so don't loop Heavy over and over.

  4. Clean around the head and the suction cap, then clean again

    When several cleanings don't help, Epson's order is: clean around the print head (Maintenance > Cleaning the Maintenance Parts > Around the Head), run a head cleaning and check; then clean around the suction cap (Cleaning the Maintenance Parts > Suction Cap), run a head cleaning and check. Wipe the cap edges until you see the cap's own color. Dried ink on the cap leaves a gap, suction drops and the nozzles won't clear. Our G6070 maintenance guide has the full cleaning steps.

  5. Still clogged?

    Check the ink packs haven't passed their date, or a year since they went in, and that the room is within 50 to 95°F. Then text us a photo of the nozzle check at (562) 609-4996.

Auto nozzle checking: why it keeps stopping

The G6070 can check its nozzles before and during printing, and act when too many are clogged. These settings live under Menu > General Settings > Maintenance Setting > Nozzle Clog Detection and Auto Cleaning:

Setting What it does Default
Threshold Clogged nozzles allowed before it acts, set separately for White and Color White 9, Color 4
Timing Check Between Jobs, or at a Specified Interval of film Every 0.5 m (1.64 ft)
Action Stop Printing, Show Alert, or Auto Cleaning Set on your printer
Max Retry Extra cleanings if a clog remains 0 to 2

If the printer pauses every few minutes and then says the clogs still aren't cleared, the head has real clogs the automatic cleaning can't fix. More retries won't help. Do steps 1 to 4 above, especially the suction cap, until a manual nozzle check is clean. Then:

  • Pauses causing uneven prints? Epson suggests changing Detection Timing from Specified Interval to Between Jobs, so checks happen between jobs instead of mid-print.
  • Action. Stop Printing halts the job and shows a message that the allowed number of clogged nozzles has been exceeded. Show Alert shows the message but keeps printing. Auto Cleaning cleans automatically before or during printing.
  • Periodic Cleaning (off by default) cleans at a set print time, page count or length, at Light or Medium. Power On Cleaning is on by default. Leave it on.

Epson notes the printer may still clean on its own to protect the head, even with Auto Cleaning off. If you see "Failed to inspect the condition of nozzles. Cannot run Auto Cleaning", the room is outside the printer's guaranteed temperature. Bring the room back into range and run Head Cleaning manually.

Watch Epson's video: printing a nozzle check on the G6070

More videos

Epson: how to perform an auto cleaning
Epson: how to clean around the print head
Epson: how to clean the suction cap

Embedded from the manufacturer's official channel.

Common questions

Is there a stronger cleaning than Heavy?

Not for owners. Cleaning (Heavy) is the strongest level in the Maintenance menu. If Heavy plus cleaning around the head and suction cap doesn't clear it, Epson says to contact your dealer or Epson. Text us at (562) 609-4996.

Why does color ink run low when I only print black and white?

Every head cleaning uses ink from all colors.

Does Auto Cleaning catch every clog?

No. Epson says it may not detect all clogged nozzles, and each check uses a small amount of ink. Keep printing a daily nozzle check.

What is Resolve Nozzle Deflection in the menu?

An exclusive menu Epson says not to use unless your dealer or Epson tells you to. Using it without instructions can affect print quality and the printer's life.

The check pattern prints but the white lines are bent sideways. Is that a clog?

That means White isn't firing straight. See our G6070 white ink guide for Nozzle Refresh.

Did this fix it?