Support
Machine type
Brand
Epson SureColor G6070 DTF printer

Epson G6070 white ink weak, uneven or misaligned: shaking, Heavy cleaning, Nozzle Refresh and Nozzle Shift

✓ Reviewed by Jason KimUpdated 2 min readFits: G6070
Short answer

Weak or uneven white on the G6070 is usually settled ink. Shake the White pack every day and when the printer asks, print a nozzle check, and run Cleaning (Heavy) on the White rows. If the white lines in the nozzle check are bent sideways, run a Light cleaning and then clean the nozzle surface with the Nozzle Refresh tool that came with the printer. If the white layer peeks out above or below the colors, correct it with Nozzle Shift.

Match your symptom

What you see Go to
White thin, patchy or uneven Steps 1 to 3
White lines on the nozzle check bent sideways Step 4
Blurry text, white showing around the edges Steps 2 and 3, then step 4
White layer peeks out above or below the colors Step 5

Step by step

  1. Shake the White pack

    White pigment sinks to the bottom of the pack and settles in the tubes. Epson says to take out the White pack and shake it thoroughly at the start of every working day and whenever the printer asks (every 24 hours). Support the tray from underneath, and shake in the tray as the screen's How To... shows. Replace a White pack right away when the printer says it needs replacing: Epson warns that running on a low White warning can damage the head.

  2. Print a nozzle check

    Press Maintenance > Print Head Nozzle Check > Start. The White rows are labeled WH1 to WH4. Gaps mean a clog. Lines that are bent or shifted sideways mean White isn't firing straight (step 4).

  3. Run Cleaning (Heavy) on White

    If shaking doesn't fix it, press Maintenance > Head Cleaning > Cleaning (Heavy) > Select Nozzles > White, select all the WH rows and press OK. Check again. Epson says if one or two Heavy cleanings don't improve the white, contact your dealer or Epson.

  4. White lines bent: Light cleaning, then Nozzle Refresh

    First run Head Cleaning > Cleaning (Light) and print another check. If the WH lines are still bent, use the Nozzle Refresh tool from the box (a holder and 30 sponges). Wear nitrile gloves, glasses and a mask, and touch metal to discharge static.

    • Put one fresh sponge in the holder: positions W1 and W2 for problems in WH1 or WH2, W3 and W4 for WH3 or WH4. Never load two positions at once. If two areas need it, do them one at a time.
    • Press Maintenance > Nozzle Refresh > Start. The head moves to the cleaning position. Open the maintenance cover.
    • Hold the holder in your right hand exactly as the illustrations in Epson's User's Guide show, line it up with the side of the nozzle surface, and seat both edges in the grooves without letting the holder's edge touch the nozzle surface.
    • Press it to the nozzle surface and slide it back and forth five times.
    • Check nothing is left inside, close the cover, press Finish, then run a head cleaning and a nozzle check.

    Don't use a damaged holder. If the lines are still bent, contact us.

  5. White layer misaligned: Nozzle Shift

    If white shows along the top or bottom edge of colored areas across the whole image, press Maintenance > Nozzle Shift. Look at the print with the leading edge up. On the WH control, one press moves all four color sliders by 1 in the opposite direction: if white shows below, lower the color values by 1; if white shows above, raise them by 1. If only one color is off, adjust that color's slider (range 3 to -3). Press OK, reprint the same image and repeat if needed. Printing a row of rectangles in white, black, yellow, magenta and cyan makes the offset easier to see.

Nozzle Shift changes every print after it. Only use it when you can actually see white layer misalignment, and note the original values first.

Watch Epson's video: shaking the G6070 ink packs

More videos

Epson: printing a nozzle check
Epson: how to replace ink packs

Embedded from the manufacturer's official channel.

Common questions

How should I store spare White packs?

Lying flat. Epson warns that packs stored upright may settle so badly that shaking can't fix them. Keep them at room temperature out of direct sun, and let cold packs warm up for four hours before use.

How often can I use Nozzle Refresh?

Only when the White lines on the nozzle check are misaligned. Epson warns that doing it too often can lower print quality.

I lost the Nozzle Refresh tool. What now?

Epson sells it as part C13S210171 (holder and sponges). Text us at (562) 609-4996 and we'll help you get one.

White is low right after I took the printer out of storage. Is that normal?

Epson says white density may be low after restarting from storage. Shake the White pack and follow the steps on this page.

How long is White ink good for?

Use it before the date on the pack, and within one year of installing it in the printer, whichever comes first.

Did this fix it?