Support
Machine type
Brand
Epson SureColor G6070 DTF printer

Epson G6070 daily, weekly and monthly maintenance: white ink shaking, platen, suction cap and around the head

✓ Reviewed by Jason KimUpdated 3 min readFits: G6070
Short answer

Every working day, take out and shake the White ink pack, print a nozzle check and wipe the platen. Clean the suction cap whenever the printer asks, and clean around the print head if prints stay dirty after head cleaning. Shake the color packs when the printer asks (every three weeks), check for firmware monthly, and leave the printer switched on.

The routine at a glance

When Task Time
Daily Shake the White pack, nozzle check, wipe the platen About 5 min
When asked Clean around the suction cap 5 to 10 min
As needed Clean around the print head 5 to 10 min
Every 3 weeks Shake each color pack About 5 min
Monthly Check Epson's site for firmware and software About 5 min

What you need

The maintenance kit that came with the printer: gloves, wide and narrow cleaning sticks, ink cleaner and a cup. Add a metal or plastic tray, a lint-free soft cloth, safety glasses and a mask. Touch something metal first to discharge static. Use only Epson's cleaning sticks and a fresh one each time, don't touch the stick tips, and never reuse ink cleaner that has cleaned something else. If the cleaner changes color or smells bad, open a new kit.

Step by step

  1. Shake the White ink pack (daily)

    White ink settles fast. Before you start printing each day, and whenever the printer asks (every 24 hours for White), pull the White tray, supporting it from underneath with both hands, and shake it in the tray as the screen shows. Press How To... on the message for the motion. Don't swing the tray hard or the pack can leak.

  2. Print a nozzle check (daily)

    Press the Maintenance icon, then Print Head Nozzle Check > Start. If there are gaps, follow our G6070 clogged nozzles guide. Epson's schedule suggests starting the day with an Auto Cleaning or a Light cleaning on just the white rows that need it.

  3. Wipe the platen (daily)

    Ink and film particles on the platen transfer to the next print. Remove the film, turn the printer off, unplug it and wait one minute. Open the printer cover and wipe the platen from the inside out with a soft, clean cloth. For heavy dirt, use a cloth dampened with mild detergent, then a dry one. Push any white specks into the platen holes with a toothpick. Don't touch the ink tubes.

  4. Keep an eye on maintenance cleaning

    The home screen shows the time left until the printer's next automatic maintenance cleaning. If it's close and you're about to start a long run, press that area and run the preventive cleaning early so it doesn't interrupt you.

  5. Clean around the suction cap (when asked)

    When the screen says it is time to clean the suction cap, press Cleaning, or go to Maintenance > Cleaning the Maintenance Parts > Suction Cap, then Start. The head moves to the maintenance position. Open the maintenance cover, press How To... and follow the steps. Dampen a cleaning stick with ink cleaner (not dripping) and wipe the cap edges until you can see the cap's own color. Also wipe ink off the tube entrance. Close the cover and press Done, then print a nozzle check. Do the same any time prints are soiled with ink, even without the message.

  6. Clean around the print head (as needed)

    If prints are still dirty after head cleaning and cap cleaning, go to Maintenance > Cleaning the Maintenance Parts > Around the Head and follow How To.... Never move the head by hand and never touch the nozzle surface with a stick. Close both covers, press Done, and print a nozzle check.

  7. Shake the color packs (every 3 weeks)

    The printer reminds you. Shake black, cyan, magenta and yellow the same way. You don't need to shake the Maintenance Liquid or a Cleaning Ink Supply Unit.

  8. Check for updates (monthly)

    Look for new firmware and RIP updates on Epson's G6070 support page. Epson Edge Dashboard can also notify you and update the firmware. Don't turn off the computer or printer during an update.

The buzzer sounds 10 minutes after the head moves out for cleaning. Press OK and keep going, but don't leave the head uncapped longer than you need to.

Watch Epson's video: cleaning the G6070 suction cap

More videos

Epson: how to shake ink packs
Epson: how to clean around the print head
Epson: how to perform maintenance cleaning
Epson: printing a nozzle check

Embedded from the manufacturer's official channel.

Common questions

How do I shake the ink packs?

With the pack in its tray, tilt it up and down at about 60 degrees as the screen shows. Epson's daily schedule says about 25 shakes for White. Press How To... on the shake message to see the exact motion.

The shake message fills the whole screen and I can't print. Why?

When there's no Close button on the message, Epson blocks all operations, including printing, until you shake the pack.

Can I use water or alcohol on the suction cap?

Use the ink cleaner from Epson's maintenance kit. Epson allows distilled water as a substitute for ink cleaner. Never use any cleaner on areas the manual doesn't name.

Should I turn the printer off at night?

Epson recommends leaving it on. It runs maintenance at every power-up, so turning it on and off often uses more ink. If it sits unused and isn't put into storage, turn it on at least once every 7 days.

The suction cap message keeps coming back. Is that normal?

Epson says to contact your dealer or Epson if it appears frequently. Text us at (562) 609-4996.

Did this fix it?