Support
Machine type
Brand
Epson SureColor F2100

Epson F2100 tube washing: when to wash the white and color ink tubes, and step by step

✓ Reviewed by Jason KimUpdated 2 min readFits: F2100 · F2000
Short answer

Tube washing flushes settled White ink out of the F2100's ink tubes with cleaning cartridges, then refills them with fresh ink. Run it when the printer asks, or on the color tubes when head cleanings won't clear a nozzle. Clean the suction cap first, then choose Maintenance > Tube Washing. Washing the White tube takes 2 cleaning cartridges and 2 White cartridges; the color tubes take 4 cleaning cartridges and one of each color.

What tube washing does and when to run it

White ink pigment slowly settles along the walls of the ink tubes. Over time that sediment makes white thinner or uneven, even with good daily shaking. Tube washing pushes cleaning solution through the tubes to flush it out, then refills them with fresh ink. Run it:

  • When the printer shows a message asking for tube washing. Epson's F2000 guide says to wash the White tube periodically and that the panel tells you when.
  • For color: Epson's F2000 guide says color tubes don't normally need it, but washing the color tube can help clear a nozzle that several head cleanings haven't cleared.

Clean the suction cap before you run tube washing (Epson's F2000 guide calls for this). A dirty cap can make the wash look like it didn't work.

What you need before you start

Printer mode and tube you wash Cleaning cartridges New ink cartridges
White ink mode: White tube 2 2 White
White ink mode: Color tubes 4 1 each of Cyan, Magenta, Yellow, Black
Color ink mode: Color tubes 4 1 each of Cyan, Magenta, Yellow, Black

Epson suggests having the new ink and cleaning cartridges on hand in case you run out, plus a new waste ink bottle if the printer says the current one doesn't have enough room. If you start without enough cleaning solution, the printer can't be used until you install new cleaning cartridges.

Step by step

  1. Unpack and turn on

    Unpack the cleaning cartridges and turn the printer on.

  2. Start Tube Washing

    Press the maintenance button. In the Maintenance menu highlight Tube Washing and press the right arrow. Choose White Ink or Color Ink, press the right arrow, highlight Yes and press OK, then press OK again to start.

  3. Swap in the cleaning cartridges

    Open the left ink cartridge cover. Put a finger in the dip on top of each cartridge you're washing and pull it straight out. There may be ink around the supply port, so keep it off your surroundings. Slide a cleaning cartridge all the way in, label facing the side of the printer. Don't touch the chip on top. Repeat for each cartridge in that tube set, then close the cover.

  4. Charge the cleaning solution

    Press OK twice. The printer pulls cleaning solution through the tubes.

  5. Put the ink back

    When the screen tells you to open the cover, follow it to replace each cleaning cartridge with an ink cartridge. Shake each ink cartridge before you insert it: 15 seconds in total, about 8 seconds, flip, then finish to 15.

  6. Let it recharge, then check

    When ink recharging finishes the screen returns to Ready. Run the other ink set the same way if you need to. Then print a nozzle check on colored paper or clear film.

Tube washing is not storage

Tube washing flushes and refills straight away. For time off, use Maintenance > Replace White Ink (more than two weeks without printing) or Storage Mode (a month or more). See our F2100 long-term storage guide.

White still weak after a wash? Text your nozzle check and a print photo to (562) 609-4996.

Common questions

How often should I wash the tubes?

When the printer's message asks for it. Epson's F2000 guide says the control panel tells you when the White ink tube needs washing.

Does tube washing use up my ink?

Yes. The tubes are refilled with fresh ink afterwards, which is why Epson tells you to have new cartridges ready.

Can I stop halfway?

Don't start without enough cleaning solution. Epson says the printer can't be used until new cleaning cartridges are installed if you run short.

Should I wash the color tubes too?

Epson's F2000 guide says color tubes don't normally need it, but washing one can help clear a clogged nozzle that several head cleanings haven't fixed.

Is tube washing the same as Storage Mode?

No. Tube washing refills ink right away. Storage Mode leaves cleaning solution in the printer for a month or more off.

Did this fix it?