Support
Machine type
Brand
Epson SureColor F2100

Artwork for Epson DTG printers (F2100, F2270, F3070): file setup for Garment Creator

✓ Reviewed by Jason KimUpdated 2 min readFits: F2100 · F2000 · F2270 · F3070 (Garment Creator and Garment Creator 2)
Short answer

Design in RGB with sRGB colors, at the size you'll print, and save as PNG or TIFF. For dark shirts, give the artwork a real transparent background so Garment Creator only lays white ink where the design is. Pure white pixels are either printed with white ink or left as background, depending on your setting. If the white underbase shows past the edges, raise Reduce White Area.

You print to an Epson DTG printer through Epson's Garment Creator software or a commercial RIP. Epson's F2270 and F3070 guides say no regular printer driver is provided, so Garment Creator 2 or a RIP is required. The setting names below come from Epson's Garment Creator guides.

File basics

Setting What Epson recommends
Formats TIFF, JPEG, PNG or BMP. Use PNG or TIFF when you need a transparent background.
Color mode RGB
Color space sRGB. Epson says sRGB colors are closer to the actual print.
Resolution 360 dpi at print size (Garment Creator guide)
File size Up to 2 GB in Garment Creator

Design at the size you'll print. If importing from another program takes a long time, Epson suggests lowering the image resolution, for example to 180 dpi.

Light and white shirts

Choose a light shirt setting in Garment Creator. Areas of pure white (R, G, B = 255, 255, 255) get no ink, so the fabric color shows there. Design with that in mind. If those white areas need to print, use a setting with white and color ink and set Treatment of White Pixel to White Ink (below).

Dark shirts: use real transparency

On a dark shirt setting, Garment Creator prints a white underbase, then the colors on top. How much white it lays down depends on your file:

  • No transparency in the file: everything except pure white pixels gets a white underbase. Very bright colors get extra white so they don't sink into the shirt color. A rectangular background prints as a solid box.
  • Transparency in the file: ink is reduced to match the transparency. Fully transparent areas get nothing, and partly transparent areas get less. This is how you print soft edges and fades onto a dark shirt.

For a white-only gradient, such as clouds, color the area white and put the gradient in the transparency, not in the color.

White pixels, Reduce White Area and Under White

  1. Treatment of White Pixel

    With white and color ink selected, choose White Ink to print pure white pixels with white ink, or Background (Transparent) to treat them as background and skip them.

  2. Reduce White Area

    This pulls the underbase in from the edges so it doesn't stick out past the color. It runs from 0 to 20 pixels and the default is 2. Raise it if you see a white line around the design.

  3. Under White

    Leave it on. Epson says you can turn it off on a dark shirt to use the fabric color in the design, but areas printed without white are less resistant to washing and rubbing.

Printing on film (F2270)

Select Film as the job creation mode in Garment Creator 2. If white shows outside the image on film, first confirm you're printing on the correct side of the sheet and that the job is set up for film. Then increase Reduce White Area.

When the file isn't the problem

Weak, uneven or blurry white usually comes from the process, not the art. Epson's checklist: shake the white ink at the start of every day, run a nozzle check, apply pretreatment evenly and not too diluted, dry the shirt completely, and check heat press temperature and pressure. You can also adjust white ink density in Garment Creator 2. Our pretreatment guide covers the details.

Watch Epson's video: Epson Garment Creator, adjusting layouts and colors

More videos

Epson Garment Creator: selecting print settings
How to load an image in Garment Creator 2
How to select print settings for DTG in Garment Creator 2

Embedded from the manufacturer's official channel.

Common questions

What file formats does Garment Creator 2 accept?

Epson lists TIFF, JPEG, PNG and BMP. Use PNG or TIFF when you need transparency, because JPEG can't carry it.

What resolution should I use?

Epson's Garment Creator guide recommends 360 dpi at print size. If importing is very slow, Epson suggests lowering the resolution, for example to 180 dpi.

Why does my white shirt print have no ink where my design is white?

On a light shirt setting, Garment Creator doesn't fire ink on pure white pixels (255, 255, 255), so the fabric shows through. That's by design.

My white ink looks weak or uneven. Is it the file?

Usually not. Epson's checklist starts with shaking the white ink daily, a nozzle check, even and strong enough pretreatment, and full drying. You can also adjust white ink density in Garment Creator 2.

Should I use a different RIP?

Garment Creator is free and works well. Some shops use a commercial RIP such as Kothari for more control. See our RIP guide.

Did this fix it?