Support
Machine type
Brand
Epson SureColor F2100

Epson Garment Creator for the F2100: choosing a T-shirt type, ink density charts, saving presets, layout and sending a print

✓ Reviewed by Jason KimUpdated 3 min readFits: Epson SureColor F2100 · F2000 · F3070 (original Garment Creator)
Short answer

In Garment Creator, select your printer, import the image, pick one of the four T-shirt types (Light Color, Dark Color, Dark Color White, or Light Color High Speed), and set the layout and platen size. To dial in a new shirt, load it, click Ink Density > Print Chart, pick the best pattern, set Color and White between -50 and +100%, and save it with Add current setting. Click Print to send the job; with a USB stick in the printer, the job is saved for repeat printing.

This guide covers the original Garment Creator that runs the F2100. If you have an F2270, or run Garment Creator 2 on an F3070, see Garment Creator 2 basics. For preparing the artwork itself, see artwork for Epson DTG printers.

Before your first job

  1. Select the printer

    On Windows, the printer only shows in Garment Creator's status area if its communication driver is installed. Pick your printer there and check the status icons say it can communicate.

  2. Prepare and load the shirt

    Pretreat and press the shirt, load it on the platen and set the platen height, as in your printer's User's Guide. If prints look misaligned, run a head alignment first.

  3. Import the image

    Use File > Import > Image, the Open icon, or drag the file onto the preview. TIFF, JPEG, PNG and BMP all work; Epson recommends RGB, sRGB and 360 dpi.

Pick a T-shirt type

Preset Use it for
Light Color T-Shirt (Standard) White and light shirts. Color ink only; pure white areas stay the shirt color
Dark Color T-Shirt (Standard) Dark shirts. White under-base, then color on top
Dark Color T-Shirt (White) White ink only, for one-color white designs
Light Color T-shirt (High Speed Color mode) Light shirts when the printer was set up in high-speed color mode

Double-click or right-click a type for Add current setting, Overwrite, Copy, Delete and Sort.

Dial in ink density with Epson's chart

  1. Load the real shirt

    Use a pretreated shirt of the exact type you'll sell, with the platen height set.

  2. Print the chart

    Select the T-shirt type, then click Ink Density > Print Chart and Yes. Garment Creator picks the right chart for the type.

  3. Read it

    Find the pattern that is least blurred or has the best density. Use the values shown above or to the left of it.

  4. Enter the values

    Set Color and, for dark shirts, White. Each runs from -50 to +100%, default 0. Epson's examples: Color +30% and White -50% on a dark shirt, or Color -20% on a light shirt.

  5. Save it

    Use Add current setting and give it a name like the shirt brand and color, so it's one click next time.

Other settings worth knowing

Setting What it does
Basic Current Ink (Color, White + Color, White, Color Dual) and print quality. White Print Quality set to Quality prints white twice
Print Direction Bi-Direction is faster. Uni-Direction is slower but better for misalignment or uneven color
Print Option Double-strike (x2) for more vivid color; Ink Blot Reduction prints yellow first to stop colors bleeding
White Management Treatment of White Pixel, Reduce White Area (0 to 20 pixels, default 2), Under White (normally ON)
Color Settings Saturation, brightness, contrast and red, green and blue levels, each -100 to +100

Ink Density and Color Replacement take priority over Color Settings. Turning Under White OFF lets a dark shirt's color show through but makes the print less resistant to washing and rubbing.

Layout

By default, the image is centered on the M size platen. Under Layout Settings choose the platen size you're actually using, set Alignment to Center or Top-Center, and nudge the position with Offset (a plus value moves right or down, minus moves left or up). You can resize, rotate in 90 degree steps and flip the image in the preview. Save a layout you reuse, such as a left chest, as a layout preset.

Send the print

  • Print: the Print button at the bottom right sends the job. You can only send while the printer isn't printing.
  • Repeat printing: with a USB memory stick in the printer, the job is saved as Epson_repeat_print.prn and printed, and the printer then waits for the next shirt. A new job with different settings overwrites it.
  • Save for later: File > Save As > Work data saves a .gcr file you can reopen. Export File saves print data to the computer or to the printer's USB stick.
  • Maintenance: the Maintenance menu runs a nozzle check or a head cleaning on the selected printer.

If Garment Creator can't see the printer, see F2100 not printing from the computer. For anything else, Text us a photo or short video at (562) 609-4996.

Watch Epson: using and creating presets in Garment Creator

More videos

Epson: selecting print settings in Garment Creator
Epson: downloading and configuring Garment Creator
Epson: adjusting layouts and colors in Garment Creator

Embedded from the manufacturer's official channel.

Common questions

Which Garment Creator does the F2100 use?

The original Epson Garment Creator. Epson's Garment Creator videos list it for the F2000, F2100 and F3070. Garment Creator 2 is for the F2270 and F3070.

Can I see ink density changes in the preview?

No. Epson says Ink Density changes can't be checked in the preview. Print the chart on the actual shirt.

How do I print the same design on a stack of shirts?

Leave a USB memory stick in the printer. Garment Creator saves the job to it as Epson_repeat_print.prn and the printer waits for the next shirt. Sending a new job overwrites that file.

My print has a white edge around it on dark shirts.

Increase Reduce White Area under White Management. It shrinks the under-base from 0 to 20 pixels (default 2) so it doesn't stick out past the color.

Colors look smeared or lines look doubled. What setting helps?

Under Advance, set Print Direction to Uni-Direction. It's slower but Epson suggests it for misalignment or uneven color. Ink Blot Reduction helps when colors run together.

Did this fix it?