Machine type
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
Epson SureColor G6070 DTF printer
Mimaki TxF300-1600
Mimaki TxF330-800
STS XPD-924D DTF Printer (Mutoh)
STS VJ-628D DTF Printer (Mutoh)
DTF Station Vega S17
STS XpertJet 1682D (XPJ-1682D) 64 inch DTF Printer
STS XPD-724 DTF Printer (Mutoh)
Hotronix Fusion IQ, Air Fusion IQ and Dual Air Fusion IQ
Geo Knight DK20S and DK20SP Digital Knight Swing-Away Presses
DTF Station Maxima and Proxima Dual Heat Presses
Hotronix Auto Open Clam and Hover Heat Press
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
Insta 718, 728 and 828 Automatic Swing-Away Heat Presses
DTF Station Prisma Sentry Heat Press
Geo Knight DC16 and DC16AP Digital Combo Swing-Away Presses
Geo Knight DK Digital Clamshell Presses: DK20, DK16, DKA Auto, DK8 Label and DK7 Cap
Hotronix Auto Open Cap Press and 360 IQ Hat Press
Hotronix Craft Heat Press 9 x 12
Hotronix Mighty Mug Heat Press
Insta 256 and 288 Manual Swing-Away Heat Presses
Insta 907 Dual Station Shuttle Label Heat Press
Viper MAXX pretreatment machine
Ecofreen Mister-T2 and Mister-T2 Pro pretreatment machines
Pearl Elite and Pearl PTM DTG pretreatment machines
Viper XPT-1000 pretreatment machine
Lawson Silver-Jet and Silver-Jet V2 DTG Pretreat Sprayers
Lawson Zoom-AE DTG pretreatment machine
Viper MINI handheld DTG pretreatment machine
Brand
Prestige XL series (L2, XL2, XL2 Pro, XL3, XL4)
DTF Station Prestige R2 Pro
DTF Station Prestige R1
DTF Station Prestige R2 (original)
Prestige X6
DTF Station Prestige A4
DTF Station Prestige A3+ and A3+ R
DTF Station Aries 124 UV DTF printer
Miro DTF Powder Shakers: Miro 13 Max, 16, 24 and 36
DTF Station Aries 213 and Aries 113 UV DTF printers
Seismo L16R and L24R DTF Powder Shaker and Dryer
Phoenix Air 16x20 DTF Curing Oven
DTF Station Maxima and Proxima Dual Heat Presses
DTF Station Prisma Auto Heat Press
DTF Station Prisma Dual Heat Press
DTF Station Prisma Swing Heat Press
DTF Station Vega S17
DTF Station Prisma Sentry Heat Press
DTF Station Seismo V36R DTF Powder Shaker and Dryer
DTF Station Arc 127 automatic cutter for DTF and UV DTF film
Epson SureColor F2100
Epson SureColor G6070 DTF printer
Epson SureColor F2270
Epson SureColor F3070
Epson SureColor F570
Epson SureColor F170
Epson SureColor F6470 and F6470H
Epson SureColor F6370
Epson SureColor F7200
Epson SureColor P-Series photo printers (P700, P900, P6570, P8570)
Epson SureColor T-Series CAD and technical printers
Epson SureColor S-Series (S40600, S60600, S80600)
Epson F2100 not printing from the computer: USB, network and Garment Creator fixes
When an F2100 won't take jobs, check the connection before the software. Use a USB cable no longer than 10 feet, plugged straight into the computer or a first-tier hub. On a network, confirm the printer's IP address and that the router port's link light is on. Install Epson's Communication Driver from the F2100 support page and keep firmware and Garment Creator current. If a USB stick is in the printer, jobs save to it first, so remove it.
Match your symptom
| What you see | Most likely cause | Go to |
|---|---|---|
| You send a job and nothing happens | Cable, hub or a USB stick in the printer | Steps 1 to 3 |
| Computer can't find the printer on the network | IP address or network link | Step 4 |
| Command Error: Check print settings on RIP | RIP or software mismatch | Step 6 |
| Printing is slow or pauses mid-shirt | Slow USB stick or Uni-Directional setting | Step 3 |
| Head moves but nothing lands on the shirt | Clogged nozzles or platen too low | Step 7 |
Step by step
-
Check the printer is ready
It must be on and not printing. You can only send data while the printer isn't printing, and while it receives data the only things you can do are turn it off, move the platen or cancel.
-
Check the USB connection
Make sure the cable is firmly connected at both ends and try a spare cable if you have one. Keep it 10 feet (3 m) or shorter. If you use a USB hub, it must be a first-tier hub. Better still, unplug the hubs and connect the printer straight to the computer.
-
Pull the USB stick out of the printer
With a stick plugged into the printer, Garment Creator saves each job to the stick first, so printing waits. Remove it before sending jobs from the computer. Slow sticks (4.63 MB per second or less) also make the head pause mid-print. For USB printing, files must be .prn files in the root folder on a FAT32 stick.
-
Check the network
Confirm the IP address under Administrator > Network Setup. If your network doesn't hand out addresses automatically, set one manually. Look at the router or switch port the printer uses: if its link light is off, reseat the Ethernet cable, try another port or another cable. Try printing from a second computer to see whether the problem is the computer or the printer.
-
Install the driver and Garment Creator
Download Epson's Communication Driver and Garment Creator from the Downloads tab on the F2100 support page. Epson recommends keeping firmware and Garment Creator on their latest versions together.
-
Clear a Command Error
Press cancel to drop the job. Check that your RIP supports the F2100, and that the printer firmware and Garment Creator are up to date. If a firmware update failed (F/W Install Error), turn the printer off, wait, turn it on and run the update again with Epson Control Dashboard for DTG.
-
If the head moves but nothing prints
Print a nozzle check. If it's blank or patchy, clean the suction cap and run a Medium cleaning on all nozzles while watching the waste ink tube for ink flow. Also check the platen height: the printer can't print if the platen is too far from the head.
Using a RIP
Epson doesn't make a RIP, so RIP licenses, dongles and profiles come from the RIP maker. Get the printer connection working with Garment Creator first, using the steps above. If Garment Creator prints and the RIP doesn't, the problem is in the RIP setup. Text us at (562) 609-4996 with your RIP name and version and a photo of the message, and we'll take it from there.
Watch Epson's video: downloading and configuring Garment Creator
Embedded from the manufacturer's official channel.
Common questions
Do I need a RIP to print on the F2100?
No. Epson includes Garment Creator for printing, and Epson doesn't sell a RIP itself. Third-party RIPs such as Kothari NeoRip are optional.
Where do I get the printer driver?
Epson says to download the Communication Driver from the Downloads tab on the F2100 support page.
It worked until we changed our router.
The printer's IP address probably changed. Check it under Administrator > Network Setup > IP Address Setting. Use Auto for DHCP, or Panel to enter the address, subnet mask and gateway yourself, then point the computer at the new address.
My Kothari dongle doesn't do anything when I plug it in.
Text us at (562) 609-4996 with your Windows version and a photo of any message. We'll walk you through it rather than guess at license steps here.
What image formats does Garment Creator print?
TIFF, JPEG, PNG and BMP. Epson recommends designing in sRGB, which is closer to the printed result on a shirt.
- Epson F2100 User's Guide: Nothing prints
- Epson F2100 User's Guide: Cannot print over a network
- Epson F2100 User's Guide: Printing is slow or stops
- Epson F2100 User's Guide: Cannot access the USB memory device
- Epson F2100 User's Guide: Print head moves but nothing prints
- Epson F2100 User's Guide: Data creation and transmission guidelines
- Epson F2100 User's Guide: Product status messages (Command Error)
- Epson F2100 User's Guide: Administrator menu
- Epson FAQ: Where can I get the latest Communication Driver?
- Epson FAQ: Does Epson offer RIP software for the product?
- Epson SureColor Network Guide
- AA support requests about F2100 connection and RIP problems, 2024 to 2026











































































