Support
Machine type
Brand
DTF Station Prestige R2 (original)

Hosonsoft (PrintExp) or DTF Station Pilot: which control software your Prestige R2 or R2 Pro uses, and when to upgrade

✓ Reviewed by Jason KimUpdated 2 min readFits: Prestige R2 Pro · Prestige R2 · Hosonsoft (PrintExp) · DTF Station Pilot
Short answer

Your control software sits between the RIP and the printer. Early R2 Pro printers and most original R2 printers run Hosonsoft (also called PrintExp). Current R2 Pro printers run DTF Station Pilot, which is built on the same platform. Don't move a printer from Hosonsoft to Pilot on your own: the printer's board firmware has to match the software version, and some original R2 units can't run Pilot at all. Always export your firmware backup first.

What the control software does

Your RIP (NeoStampa or DigiRIP) turns artwork into print data. The control software takes that data and drives the printer over the Ethernet cable. It's also where you run nozzle checks, cleanings and calibrations, and where the error log lives.

Which printers run which

Printer Control software RIP
Prestige R2 Pro, current units DTF Station Pilot NeoStampa (USB dongle)
Prestige R2 Pro, early units Hosonsoft (PrintExp) DigiRIP
Prestige R2 (original) Hosonsoft (PrintExp) on most units DigiRIP, or NeoStampa after an upgrade

Hosonsoft terms in plain English

Hosonsoft says It means
Check Nozzle check (Head Status on the control panel)
Clean Head cleaning
Load Fill Ink
Ahead / Back Move the film down / up
H1 Color (CMYK) head, on the left
H2 White head, on the right

Reinstalling Hosonsoft

Hosonsoft doesn't need an installer. Extract your printer's Hosonsoft folder (from the USB drive or the link your dealer sent) and double-click PrintExp.exe. If Windows Defender warns you, click More info > Run anyway and allow access. If it shows errors when opening, install the vc_redist.x64 file from the same folder. Connect the printer straight to the computer by Ethernet, with no router or switch. A blinking red icon in the corner means the connection isn't set up yet: follow our connection guide, then set the language to English and set your film margin, clicking Save after every change.

Upgrading from Hosonsoft to Pilot

Don't upgrade an original Prestige R2 on your own. Some R2 units are missing a board that Pilot depends on, and the upgrade can leave the printer unable to start. Most R2 Pro printers can upgrade, but confirm with us first.

Pilot's version has to match the firmware on the printer's motherboard, so the upgrade has several parts. DTF Station's technicians supply three things for your exact model: the Pilot installer, a motherboard upgrade file and your firmware files. The process, which we do with you on a call, is:

  1. Back up

    Export your current firmware configuration and parameter files and photograph your settings and calibration values.

  2. Check the version

    In Hosonsoft, Advanced > Version Info shows the version. Its first four digits confirm the right upgrade files.

  3. Upgrade the motherboard

    The motherboard file (a .UPF file) is loaded through Hosonsoft's Upgrade button, then the printer is power-cycled.

  4. Install Pilot and import firmware

    Pilot is installed with the TCP link option, the firmware files for your model are imported, and the printer is saved and initialized.

  5. Verify

    Pilot's firmware version screen should show matching motherboard and software versions. Then a nozzle check and test print.

Printers built before December 2024 may need this motherboard and firmware update before current Pilot works. Check the date on the serial sticker and text us a photo of it at (562) 609-4996.

Watch DTF Station's video: upgrading from Hosonsoft to Pilot

Embedded from the manufacturer's official channel.

Common questions

How do I know which one I have?

Look at the program you open to run nozzle checks. Hosonsoft's buttons say Check, Clean and Load. Pilot is labeled DTF Station Pilot.

Is Pilot better?

It's DTF Station's current software, so new guides use it, but Hosonsoft works fine on the printers built for it. Upgrade only when we confirm your printer is compatible.

What can go wrong if the versions don't match?

Poor nozzle checks, white circulation that won't run, head strikes, wrong colors, or a string of unexplained errors. Send us photos of both version numbers if you suspect a mismatch.

Hosonsoft won't open on my computer.

Install the vc_redist.x64 file from your software folder, allow PrintExp through your antivirus, and make sure the printer is connected by Ethernet directly to the computer.

Did this fix it?