Support
Machine type
Brand
DTF Station Prestige A3+ and A3+ R

Prestige A3+, A3+ R and A4 blinking red lights: what each pattern means and how to clear it

✓ Reviewed by Jason KimUpdated 3 min readFits: Prestige A3+ · Prestige A3+ R · Prestige A4
Short answer

Watch how the two red lights (ink and paper) blink. If they take turns, the printer's waste ink counter has hit its limit: empty the waste bottle, then text us for the counter reset tool and we'll walk you through it. If they blink together, the print head carriage couldn't return to its home position, usually because of a dirty encoder strip, something blocking the carriage, or the head not locking onto the capping station. Clean the encoder strip and clear the path before anything else.

Match your lights

What you see What it means Go to
Ink and paper lights blink in turns (alternating) The waste ink counter is full. The printer stops until it's reset Alternating lights
Ink and paper lights blink together, often fast The carriage couldn't get back to its home position Lights blinking together
Lights blink together right after you replaced a part A cable isn't fully seated After a repair
Ink light on solid (A3+, A3+ R) The engine can't read an ink cartridge or thinks it's empty Reseat the cartridges and check they have ink, then text us
Ink light on solid (A4) The initial ink charge may not have finished Text us before running more cleanings
Power light blinking green The printer is busy (printing, charging ink or cleaning) Wait. Never turn it off mid-cleaning

The Prestige A3+, A3+ R and A4 are built on Epson printer engines, so their panel lights follow Epson's patterns. Before you do anything, take a 10-second video of the lights. It tells us exactly what we're dealing with.

Alternating lights: reset the waste ink counter

On a standard Epson printer, this pattern means the internal ink pads are full. On your Prestige, used ink drains through a tube to the external waste bottle instead, but the printer still keeps count and stops when the count reaches its limit.

  1. Empty the waste bottle and check the tube

    Empty the waste bottle. Make sure the waste tube sits inside it and isn't kinked, clipped or clogged. If you clip the tube overnight, take the clip off.

  2. Reset the counter

    The reset is done from a Windows PC connected to the printer by USB, using a reset utility for your model. Text us and we'll send it and walk you through it the first time.

  3. Power cycle and test

    Turn the printer off, wait a few seconds, turn it back on, and print a nozzle check.

Lights blinking together: get the carriage home

Epson's guide describes this pattern as the print head being blocked and unable to return to its home position. On Prestige printers, the usual causes are a dirty encoder strip (the thin clear strip the carriage reads to know where it is), something in the carriage's path, or the head not locking onto the capping station.

  1. Turn off and clear the path

    Turn the printer off. Open the cover and look along the whole carriage path for film scraps, tape, packing material or anything else in the way. Remove it.

  2. Clean the encoder strip

    Dampen a lint-free cloth with isopropyl alcohol (90% or stronger). Pinch the strip gently between the cloth and wipe it from one end to the other, both sides. Don't bend it. Check that it sits centered in its bracket when you're done.

    If the strip is scratched, creased or dented, cleaning won't fix it. Replace it.

  3. Turn on and watch the carriage

    Power on and let the printer initialize. Watch the carriage go home and park on the capping station.

  4. If it comes back during cleanings or after prints

    The carriage may not be locking at the capping station. Clean the cap and the area around it, then record a short video of a full head cleaning cycle with a light on the carriage and cap, and text it to us.

After a repair

If the lights started after you replaced a print head, board, pump or dampers, power off and reseat every cable you touched. Push ribbon cables straight in, without wiggling, until they're fully home, and check none of their contacts are bent. Then power on once. If the lights return, stop and text us. Repeated power cycles with a bad connection can damage boards.

Before you contact us

  • A short video of the lights
  • Whether they alternate or blink together
  • What happened just before (printing, head cleaning, power on, a repair)
  • Any error code shown by the reset utility, if you already have it

Text us a photo or short video at (562) 609-4996.

Watch DTF Station's video: cleaning the encoder strip on the Prestige A3+ R

Embedded from the manufacturer's official channel.

Common questions

Does a blinking red light mean my printer is broken?

Usually not. Alternating lights are a counter that needs resetting, and lights blinking together are most often a dirty encoder strip or something in the carriage's way. Both are fixable without new parts in most cases.

I reset the waste counter and the lights came back. Why?

Check the pattern again. If they now blink together, it's a carriage problem, not the counter, and resetting again won't help. If they still alternate, the reset didn't complete. Text us and we'll check it with you.

Why does the waste counter fill up?

Every head cleaning sends ink to waste, and the printer counts it. Running lots of extra cleanings fills the counter faster, which is one more reason to clean only when the nozzle check calls for it.

The lights started right after I replaced a part. What now?

Power off and reseat every cable you unplugged, pushing ribbon cables straight in and fully home. A cable that's slightly off is the most common cause after a repair. If the lights stay, text us before trying anything else.

Can I download a resetter from the internet?

We don't recommend it. Unknown reset tools can carry malware or target the wrong model. Text us and we'll send the right one for your printer.

Sources
Did this fix it?