Support
Machine type
Brand
Epson SureColor F570

Epson F570 clogged nozzles or faint colors: Head Cleaning, Powerful Cleaning and Power Ink Flushing

✓ Reviewed by Jason KimUpdated 2 min readFits: F570 · F570 Professional Edition
Short answer

Print a nozzle check from Settings > Maintenance > Print Head Nozzle Check and run Head Cleaning only if there are gaps. After three cleanings without improvement, run Powerful Cleaning with every tank at least a third full. If nozzles are still clogged, leave the printer off overnight. As a last step, refill all tanks completely and run Power Ink Flushing, then leave it off overnight again before calling for service.

Match your symptom

What you see Most likely cause Go to
Gaps or faint lines in the nozzle check Clogged nozzles Steps 1 to 4
Grainy or blurry prints, misaligned vertical lines, regular light or dark bands Needs print quality adjustment Step 5
Nozzle check perfect, colors weak Settings, paper or ink age Our driver and color guide
Ink smears on the paper Dirty paper path Step 6

Step by step

  1. Print a nozzle check

    Load roll or cut-sheet paper. Press the home button, then choose Settings > Maintenance > Print Head Nozzle Check and Start. You can also run it from the printer utility on your computer. If there are no gaps, you're done.

  2. Head Cleaning, up to three times

    If lines are missing or faint, choose Settings > Maintenance > Head Cleaning and Start, then print the pattern again when asked. Never open a cover or turn the printer off during a cleaning cycle.

  3. Powerful Cleaning

    If three Head Cleanings haven't helped, make sure every ink tank is at least a third full, then choose Settings > Maintenance > Powerful Cleaning and Start. Print a nozzle check afterward. If it's still clogged, turn the printer off and leave it off overnight, then check again.

  4. Power Ink Flushing, last

    Fill every tank completely first. Then choose Settings > Maintenance > Power Ink Flushing and follow the screen. It can take up to 20 minutes and replaces all the ink in the ink tubes. Print a nozzle check. If nozzles are still clogged, leave the printer off overnight once more and check again.

    Each step uses more ink and fills the maintenance box faster than the one before. Don't jump ahead.

  5. Print Quality Adjustment

    For grainy, blurry or banded prints with a clean nozzle check, check that the right paper type is selected, then choose Settings > Maintenance > Print Quality Adjustment. You'll need at least 16.5 inches of roll paper, two A3 or A4 sheets in the auto sheet feeder, or the equivalent cut sheets. Pick the best pattern each time the screen asks.

  6. Clean the paper path

    For smears from the auto sheet feeder, load plain paper and run Settings > Maintenance > Paper Guide Cleaning until the sheet comes out clean. For roll paper, use Paper Setting > Roll Paper > Feed/Cut Paper and hold Forward until the paper is clean, then cut.

Still clogged?

Epson's guide says to contact Epson for support after Power Ink Flushing and an overnight rest. Send us your nozzle check photos and purchase date and we'll help you with the next step.

Common questions

The printer won't let me clean the head.

It can't clean when an ink tank has reached the lower line, and may refuse when any tank is low. Refill first. It also won't clean if the maintenance box doesn't have room; replace the box and try again.

How long does Power Ink Flushing take?

Up to 20 minutes. It uses more ink than the other cleanings and shortens the maintenance box's life, so only use it after the steps before it have failed.

I haven't used my F570 in months and the lines are faint.

Refill to the upper line, then follow the steps in order. Don't skip straight to Power Ink Flushing.

Cyan prints faint but the nozzle check is fine.

If every line in the check prints, the head isn't clogged. Check that the Media Type in the driver matches your paper, that your ink isn't expired, and your color management settings. See our driver and color guide.

I hear a clicking sound from the carriage or see wheel marks.

That's not a nozzle problem. Text us a short video at (562) 609-4996.

Sources
Did this fix it?