Support
Machine type
Brand
STS VJ-628D DTF Printer (Mutoh)

STS / Mutoh printer not found in Mutoh Status Monitor (MSM), lost connection, or moving MSM to a new computer

✓ Reviewed by Jason KimUpdated 2 min readFits: XPD-724 · XPJ-1682D · XPD-924D · VJ-628D
Short answer

MSM can only find your STS printer if the printer and computer are on the same network segment, connected by Ethernet, with MSM allowed through the Windows firewall. If the printer disappeared after a new router or modem, its IP address probably no longer matches your network: find the printer with Search Printer in MSM, or register it by entering its IP address. On a new computer, install MSM, add the firewall exception, and register the printer again.

Match your symptom

What you see Most likely cause Go to
Worked yesterday, now MSM shows an error icon for the printer Printer off, cable loose, or computer on a different network Step 1
Stopped after a new modem, router or switch Printer's IP address no longer matches the network Steps 1 and 3
New computer, or MSM reinstalled MSM not installed, not allowed through firewall, or printer not registered Steps 2 and 3
MSM sees the printer but maintenance buttons won't work Another computer holds the control right Step 4

Step by step

  1. Check the basics

    Make sure the printer is on and the Ethernet cable is firmly in the printer's network port and in the computer or network switch. STS printers connect by Ethernet only. The XPJ-1682D manual calls for a Gigabit port and a Category 6 or better cable. In MSM, look at the printer's communication status and open Detail Information: it shows the cause, for example that the printer is off.

  2. Install MSM and allow it through the firewall

    On a new computer, log on as an administrator and run MSM's Setup.exe. Then add MSM to the Windows firewall exceptions: allow the program MSM.exe, which installs by default in Program Files > Mutoh > Mutoh Status Monitor. If you use another security suite instead of Windows Firewall, allow MSM in that software. Your printer driver and RIP also need to be installed on the new computer. If your RIP needs its license moved, text us before you wipe the old computer.

  3. Register the printer

    When MSM first opens it walks you through setup. Click Start and untick the ValueJet Club service, click Save, then Add to register a printer. You have two ways to find it:

    • Search Printer finds printers on the same network segment. Pick yours, give it a name, click Enter, then Yes and OK.
    • Enter IP Address registers it by typing in the printer's IP address. Use this if Search finds nothing or the printer is on a different segment.

    If the printer is already registered but its IP address changed, select it, click Setup, and use Search Printer there. MSM shows the new address so you can apply it.

  4. Check the control right

    Only one MSM can hold the control right for a printer at a time. When you register, tick Control right on the computer you'll run maintenance from. If another computer still has it, it is released after 3 minutes with no contact from that computer, so close MSM on the old machine.

  5. If the printer's IP address doesn't fit your network

    For a direct cable between printer and PC, or a printer on a switch, the printer and computer must be on the same subnet. On the XPJ-1682D you set the IP address, subnet mask and gateway from the touch panel (Setup 23 to 25). On other models, MSM's remote panel or the MUTOH Finder tool that came with the printer changes it. Mutoh's manuals say to set these with whoever runs your network. If you change the network settings and the printer still won't talk, restart the printer.

Don't change the printer's network settings while it's printing. The job won't finish.

Before you call

If MSM can reach the printer but something else is wrong, use MSM's Printer Information Backup to save the printer's information to your computer. It helps us see the problem faster. Then text us at (562) 609-4996.

Watch Mutoh's video: connecting your Mutoh printer to your computer over the network

Embedded from the manufacturer's official channel.

Common questions

We got a new modem and now nothing connects. Why?

The printer keeps the IP address it had on the old network. If the new router uses a different address range, the computer can't reach it. Either bring the printer onto the new range (on the XPJ-1682D through the touch panel's IP Address, Subnet Mask and Gateway menus; on other models through MSM's remote panel or the MUTOH Finder tool that came with the printer), or text us and we'll help you pick the right numbers.

Search Printer finds nothing. What next?

Search only looks on the same network segment. Check the cable at both ends and that the printer is on, then register it with Enter IP Address instead. If you don't know the IP address, text us.

Can I run MSM on two computers?

Yes, but only one copy at a time holds the control right that lets it run maintenance and update settings. If the old computer still has MSM open, the control right is released after it has had no contact with the printer for 3 minutes.

My RIP can't find the printer either. Is that the same problem?

Usually. The manual's fix for 'MSM or RIP cannot access the printer' is the same: check the Ethernet cable and make sure the printer's network settings match the computer's. Once MSM can see the printer, set the same IP address in your RIP's printer setup.

Which Windows versions does MSM support?

Check Help > Version > Check for updates in MSM and keep it on the latest version. MSM is Windows software and must be run by a user with administrator rights.

Sources
Did this fix it?