Support
Machine type
Brand
Epson SureColor F6470 and F6470H

Epson F6470 capping station and wiper cleaning, and print head cleaning for ink drops

✓ Reviewed by Jason KimUpdated 2 min readFits: F6470 · F6470H · SC-F6400 Series
Short answer

Clean the F6470's capping station and wiper once a month: choose Cleaning the Maintenance Parts > Capping Station/Wiper, open the maintenance cover, and wipe the outer, top and inner edges of the caps and the wiper with a stick dampened in ink cleaner. If three head cleanings don't fix lines or wrong colors, do this cleaning. For ink drops that cleaning won't fix, run the Print Head cleaning with the head maintenance kit.

Match your symptom

What you see What Epson says to do
Routine, once a month Clean the capping station and wiper (more often in a dusty room or with linty media)
Gaps in the nozzle check, horizontal lines or wrong colors Head Cleaning: Auto Cleaning, then Cleaning (Light), then Cleaning (Heavy). If three cleanings don't help, clean the capping station and wiper
Ink drops on the prints Head Cleaning first. If three cleanings don't help, clean the print head with the head maintenance kit

Remove the paper first, wear eye protection, gloves and a mask, and touch something metal to discharge static. Use only the cleaning sticks and ink cleaner from the maintenance kit, always fresh sticks, and don't touch the stick tips. Never touch belts or circuit boards.

Cleaning the capping station and wiper

  1. Move the head out

    On the screen, open the maintenance menu and choose Cleaning the Maintenance Parts > Capping Station/Wiper, then Next > Start. The print head moves to the cleaning position.

  2. Open the maintenance cover and set up

    Open the maintenance cover. Pour ink cleaner into the kit's cup up to the first line, and work over a tray so drips don't land on anything.

  3. Wipe the capping station

    Dampen a cleaning stick in the ink cleaner so it's wet but not dripping. Wipe ink and lint off the capping station's outer edges, top edges and inner edges.

  4. Wipe the wiper

    With the stick, wipe ink and lint off the wiping part of the wiper.

  5. Close up

    Close the maintenance cover and press Done. Print a nozzle check from Print Head Nozzle Check.

Cleaning the print head for ink drops

  1. Start the procedure

    Choose Cleaning the Maintenance Parts > Print Head, then Next > Start. The head moves. Open the printer cover.

  2. Place the two pads

    Peel the backing from the two head maintenance kit pads and place one on each side of the print head, slightly away from it, with each pad's edge pressed against the roller. There must be no gap between pad and roller or the cleaning won't work. Never move the head by hand.

  3. Secure them and run it

    Rub over the adhesive areas so no part is loose, without pressing hard on the pad, which can deform the platen. Close the cover and press Continue. Don't open the cover while it runs, or it stops.

  4. Remove the pads

    When the screen says so, open the cover and lift the pads out carefully so no dirt falls. Check the platen and clean it if it's dusty. Close the cover and press Done; a head cleaning runs. Don't reuse the pads.

Prevent it next time

  • In Maintenance Setting, turn on Periodic Cleaning (by print time, print count or print length) and Maintenance Cleaning so the printer cleans before clogs form.
  • Clean the platen monthly with a soft, lint-free cloth, with the printer off and unplugged for a minute first. Don't touch the ink tubes inside.
  • Vacuum the vent monthly or when dust shows. A blocked vent can overheat the printer and stop it.

Still seeing lines or drops? Text a photo of the nozzle check to (562) 609-4996.

Epson's video: cleaning the F6470 capping station and wiper

More videos

Epson: F6470 print head maintenance

Embedded from the manufacturer's official channel.

Common questions

How often should I clean the capping station?

Once a month, Epson says, and more often in a dusty room or with media that sheds lint.

What can I clean the caps and wiper with?

Only the ink cleaner and cleaning sticks from the maintenance kit. Epson says other sticks can leave lint that damages the head.

How many head cleanings before I clean the caps?

Epson's troubleshooting says to try Head Cleaning (Auto, then Light, then Heavy), and if three cleanings don't improve it, clean the capping station and wiper.

Can I reuse the head maintenance kit pads?

No. Use a new pair each time.

Can the printer clean itself more often?

Yes. Turn on Periodic Cleaning and Maintenance Cleaning in Maintenance Setting.

Did this fix it?